刚性粒子增韧尼龙1010体系的研究

采用扫描电镜和动态力学等研究了在磺化聚苯乙烯（ＨＳＰＳ）作用下，尼龙１０１０（ＰＡ１０１０）／聚苯乙烯（ＰＳ）共混物的形态及相容性。结果表明，ＨＳＰＳ的加入显著改善了ＰＳ与ＰＡ１０１０的相容性，加强了界面粘结，使共混物缺口冲击明显提高，实现了ＰＳ增韧ＰＡ１０１０的目标。偏光显微竟结盟表明，ＨＳＰＳ的加入对共混物中ＰＡ１０１０的结晶形态有明显影响，使ＰＡ１０１０球晶细化且不完善。     

二氧化锗同类异构体在标化及高量锗测定中的影响

研究了用X-射线衍射分析纯二氧化锗分子结构与组成，以及结构中存在同类异构体时，不同分解方法对标定和锗测定结果的影响。提出了在锗滴定法中使用的基准二氧化锗，用Na2O2高温熔融分解，以消除因低温碱溶不完全，在标定时产生的误差导致锗结果偏高。拟定方法经实际运用，结果准确、满意。     

Enthalpies of solution,partial molal heat capacities and apparent molal volumes of sugars and polyols in water

Integral enthalpies of solution of some sugars and polyols in water at low concentrations have been determined calorimetrically at 25 and 35°C. These data have been used to derive heat capacities of solution C°_p at 30°C. Partial molal heat capacities C°_p,2 have been obtained by combining C°_p with C _p,2 ^* , the heat capacity of pure solid compounds. Apparent molal volumes have been obtained from density data. The sugars as well as polyols show significantly high positive C°_p and C°_p,2 values. The results have been explained in terms of a specific hydration model. The effect of substitution of-OH by glycosidic-OCH₃ and of-CHOH by deoxy-CH₂ are also discussed.     

Isopiestic study of the interactions between calcium chloride and methyl glycofuranosides in aqueous solution

Osmotic coefficients have been determined for three isomeric methyl glycofuranosides, viz. methyl -D-lyxo-, -D-ribo-, and -D-ribofuranosides in aqueous solution by the isopiestic comparison method. The method was further applied to measure the osmotic coefficients for the ternary system consisting of calcium chloride, methyl glycofuranoside, and water. The results are analyzed in terms of an excess function from which the salting constants for the glycosides are derived. Relationships between the salting constants and the complexing of methyl glycofuranosides with calcium ion are discussed.     

聚左旋乳酸-聚乙二醇二嵌段共聚物的非等温结晶行为研究

通过变温广角X射线衍射(WAXD)、 差示扫描量热法(DSC)和偏光显微镜(POM)研究了聚左旋乳酸-聚乙二醇(PLLA-PEG)二嵌段共聚物的非等温结晶行为, 并用Ozawa方程分析了PLLA-PEG的非等温结晶动力学. 实验结果表明, 高熔点的硬段PLLA结晶符合Ozawa理论, 而低熔点的软段PEG对PLLA的结晶起到了稀释剂的作用; 当软段PEG开始结晶时, 已经结晶完全的硬段PLLA限制了PEG的结晶, 使得软段PEG的结晶不符合Ozawa理论. 此外, 不同降温速率下的结晶形貌研究结果表明, 随着降温速率的增加, 晶体经历了从环带球晶、 环带和十字消光的混合球晶到典型的十字消光球晶的转变, 并且球晶的尺寸也明显变小.     

Preparation, characterization and crystalline transitions of odd-even polyamides 11,12 and 11,10

The novel odd-even polyamides 11,12 (P11, 12) and 11,10 (P11, 10) were synthesized via step-heating melting-polycondensation of 1,11-diaminoundecane with dodecanedioic acid and decanedioic acid, respectively. Their chemical structures were confirmed by various spectroscopic techniques (FTIR, Raman, NMR). The thermal properties of the polyamides under consideration were measured by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The crystalline transitions of the prepared polyamides were studied by wide angle X-ray diffraction (WAXD) and Fourier transform infrared spectroscopy (FTIR). The variable temperature WXRD results indicated that P11,10 undergoes the Brill transition during the heating process before melt while P11,12 does not. From the real time FTIR spectra of P11,10, it was found that the intensity of hydrogen bond becomes weak, and the twisting of the C-CO and C-N bonds becomes enhanced. The vibration of the methylene units strengthens and the trans-zigzag conformation decreases. The ordered stacking of the methylene segments becomes gradually disordered by insertion of the gauche conformation during the crystalline transition process.     

黄原胶溶致液晶行为的研究

以小角激光光散射法、偏光显微镜法及旋转粘度计法研究了黄原胶水溶液在不同浓度和温度下的光学性质。结构区域及粘性行为。发现当溶液浓度达到3％(临界浓度值)时,呈现胆甾型液晶特征,液晶的形成对温度有显著的依赖性。     

The Crystalline State of Macromolecular Substances

Unlike low molecular weight substances, high polymers do not crystallize completely. However long the crystallization process is continued, they still consist of a mixture of crystalline and non crystalline regions. In the undrawn material, these regions form larger units which are known as spherulites. Questions that are of special interest concern the arrangement of the chains in the noncrystalline regions, the causes of chain folding, and the imperfections in the crystals. The incomplete crystallization is a consequence of kinetic inhibitions. This can be deduced from the fact that the crystalline fraction increases with rising crystallization temperature. If polymerization is carried out in the solid crystalline state, one obtains a completely crystalline polymeric material.     

Polyurethane/montmorillonite nanocomposites prepared from crystalline polyols, using 1,4-butanediol and organoclay hybrid as chain extenders

Polyurethane/montmorillonite (PU/MMT) nanocomposites were prepared via in situ polymerization from highly crystalline poly(butylene succinate)/poly(ethylene glycol) polyols and 4,4^′-dicyclohexylmethane diisocyanate, using both 1,4-butanediol and 1, 2, or 3 wt.% of a tris(hydroxymethyl)aminomethane-MMT hybrid, as chain extenders. The corresponding nanocomposites were designated PU-1MMT, PU-2MMT and PU-3MMT, respectively. The layered silicates were mostly intercalated in the nanocomposites. The distances between the individual silicate layers in the PU-1MMT and PU-2MMT were in the range of 2-10 nm, while those in the PU-3MMT were only about 2 nm. The inefficient exfoliation of the clay in this system was mainly due to the high crystallinity and polarity of the PBS polyol. There were no significant changes in the thermal properties of the pure PU and PU nanocomposites. However, the tensile modulus and elongation of the PU-2MMT at break were significantly greater than those of the pure PU and PU-3MMT.     

Liquid Crystalline Polymers

The liquid crystalline behavior of low molecular weight compounds has been known for more than a century; synthetic polymers have been manufactured on a large scale for several decades, but just recently it was found possible to produce polymers using the structural principles of liquid crystalline compounds. The resulting materials have, as expected, unusual properties. Numerous applications, not only in opto-electronics, are already anticipated for such materials.