动,静态硫化（NR＋SBR）／PE共混体系的结构与性能

用TEM研究了(NR SBR)/PE共混体系经动、静态硫化后的形态结构及其与力学性能的关系。未硫化和静态硫化体系的形态结构与其组成有关,均以含量大的组份为连续相;对动态硫化体系,当(NR=SBR)/PE<70/30时,均以PE为连续相,其性能主要依赖于构成连续相组份的性质。 动态硫化体系的T_g值低于静态体系,随PE组份含量的增加变化不大,而静态硫化体系的T_g值则随PE含量增加向高温方向迁移。用DSC测得动态硫化体系的结晶度比静态体系的大。前者的应力-应变性能也低于后者。     

β晶型聚丙烯塑性形变过程中的形态变化

β晶型聚丙烯塑性形变过程中的形态变化沈静姝，任宏燕，况勋（中国科学院化学研究所高分子物理开放实验室，北京，１０００８０）史观一（中国科学院上海有机所，上海，２０００３２）关键词β晶型聚丙烯，塑性形变，形态全同立构聚丙烯的分子链都是３；螺旋链，但其晶体...     

结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。     

晶性3，4－聚异戊二烯的结构研究

采用ＷＡＸＤ、ＳＡＸＳ和Ｘ－射线平板照相法研究了不同聚合条件和拉伸倍数下的晶性３，４－聚异戊二烯的结构．结果发现，降低催化体系反应速度有利于产物结晶；不同的含氮类给电子试剂对聚合物的结晶结构影响较大．取向样品随着拉伸倍数的增加结晶度和长周期增大，微晶尺寸变小．ＳＡＸＳ的散射强度计算表明，该聚合物属多分散非均一粒子体系，微孔半径在３．５－１６．４ｎｍ间．     

胆甾液晶／聚合物多组分体系的结构与性能研究（Ⅲ）──ChN／poly（MMA－CO－BMA）混合体系的形态结构

应用Ｘ射线衍射、偏光显微镜及电子显微镜研究了胆甾液晶与甲基丙烯酸甲酯（ＭＭＡ）─甲基丙烯酸丁酯（ＢＭＡ）无规共聚物共混体系的形态结构。研究了体系的结晶态及液晶态的行为和共聚物含量及组成对光学织构的影响。     

共聚酯型热熔粘结纤维结晶结构及其熔融行为

采用DSC与WAXD相结合的方法研究了两个系列的无规嵌段共聚酯型热熔粘结纤维的结晶结构并探讨了系列样品的熔融行为.实验表明,以最低熔融温度为界,可将样品分为两组,每组只含一种可结晶单元的结晶.其结构与物理机械性质随该可结晶单元的加入量而有规律的变化.纤维的粘结性能则取决于非晶区结构,非晶区分子链柔性增加,会明显改善粘结效果.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Morphological effect on spectral property of poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) films

In this study the optical property and film morphology of a conjugated polymer, poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) (PF6OC6), are investigated. It is found that the intensity of the 0-1 emission relative to the 0-0 emission in the PL spectra and the full width at the half-maximum (fwhm) of PL spectra of the PF6OC6 films decrease firstly and then increase with increasing the annealing temperature. The polymer films also exhibit different morphological features after annealing at different temperatures. The optical and morphological results suggest that the vibronic structure of PF6OC6 is closely related to the film morphology, and its formation is enhanced in the amorphous (or less ordered) films and inhibited in the ordered films.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

聚甲醛自然老化的SEM研究

对户外曝晒3～36个月的聚甲醛(POM)老化形态进行了研究,讨论了老化层厚度,裂纹宽度、裂纹深度及断口形态与老化时间的关系。结果表明:POM的老化导致了材料内部结构由韧性变成脆性而几乎完全丧失物理机械性能。