Poly-dimethylsiloxane derivates side chains effect on syntan functionalized Polyamide fabric

Poly-dimethylsiloxane (PDMS) polymers finishing of Polyamide-6,6 (PA66) fabrics involves ionic interactions between reactive groups on the PDMS polymers and the ones of the textile fabric. Such interactions could be strengthened by a pretreatment with a fixing agent to promote either ion-ion and H-bonding and ion-dipole forces. These forces could contribute towards the building of substantial PDMS-PA66 systems and the achieving of better adhesion properties to fabrics. Four different silicone polymers based on PDMS were applied on a synthetic tanning agent (syntan) finished Polyamide-6,6 fabric under acid conditions. Soxhlet extraction method and ATR FT-IR technique were used to investigate the application conditions. The finishing parameters such as pH and temperature together with fastness, mechanical and performance properties of the treated samples were studied and related to PDMS side chains effect on syntan functionalized Polyamide fabric.     

Demulsification and Interfacial Properties of Crosslinking Phenol-Amine Resin Block Polyether Demulsifiers

Six novel crosslinking phenol-amine resin block polyether demulsifiers were synthesized for demulsification of surfactant-polymer flooding emulsion. The demulsification performances of these demulsifiers were investigated by conventional graduated bottle test. Their interfacial behaviors at water-oil interface were explored by dynamic interfacial tension and interfacial dilational viscoelasticity measurements. The results show that the demulsification efficiency is dependant on the hydrophilic-hydrophobic balance (HLB) value of these demulsifiers. It was also correlated to the interfacial activity and the dilational elasticity at the water-oil interface. The higher the HLB value of demulsifiers, the better the demulsification efficiency is.     

HIGH INDEX OPTICAL MATERIALS PREPARED BY COPOLYMERIZATION OF NOVEL BIFUNCTIONAL THIOMETHACRYLATES

Optical materials, such as ophthalmic lens, are thermosetting resins, which require crosslinking agents. An optical resin, having a high refractive index, is usually produced by radical copolymerization in which high index crosslinking monomers are significantly important. We provide here the resins prepared by radical polymerization of novel bifunctional thiomethacrylates as high index crosslinkers.     

EQUILIBRIUM SWELLING PROPERTIES OF LIGHTLY CROSSLINKED ISOTROPIC NETWORKS: NATURAL RUBBER CROSSLINKED IN DRY STATE

Lightly crosslinked natural rubber (NR) networks have been characterized by equilibrium swelling in toluene. A good agreement between the equilibrium swelling crosslink-junction densities (μ_E) and the values expected from the stoichiometry of dicumyl peroxide decomposition (μ_c) has been obtained using Flory's early equation of state. The applicable value of χ = 0.37 was found to compare equally well and is in tandem with the previously reported literature values of χ = 0.391 and χ = 0.35 from swelling and heat of mixing measurements, respectively.

At low crosslink-junction densities i.e., μ_E ≤ 4.2 mM.l^?1 corresponding on average to 4 crosslink-junctions per cis 1,4-poly-isoprene chain and below, network formation is found to be incomplete. The approach used also provides a simple way of differentiating lightly crosslinked networks from the state of gelation.     

Comparative analysis of commercial dermal fillers based on crosslinked hyaluronan: Physical characterization and in vitro enzymatic degradation

The cosmetic market for hyaluronic acid (HA)-based dermal fillers is in continuous and rapid growth and, simultaneously, the development of more effective and safer products is strongly intensifying. In order to highlight the differences among the currently available fillers, in terms of their physical characteristics and on the relation of such properties with product effectiveness, an in vitro evaluation of eight marketed HA-based gels was performed.Filler swelling properties, soluble HA fraction and rheological behaviour were investigated. Furthermore the relative stability to enzymatic hydrolysis was tested. The presence of soluble HA in the formulations varied from 7 ± 1(%) to 33 ± 5(%) with respect to the total HA concentration. Chromatographic analyses showed that the soluble fractions consist of low molecular weight chains (M_w: 260-480 kDa) presenting large distributions (M_w/M_n: 1.6-2.5). The investigated fillers were found to be non-equilibrium gels in their commercial formulation also showing different swelling capacities. Rheological measurements indicated a shear thinning behaviour for all the products and elastic modulus values varied over a wide range (100-1800 Pa). Fillers proved differently sensitive to enzymatic degradation. Swelling capacity and enzymatic stability were found consistently dependent on the total HA concentration, insoluble/soluble HA ratio and on the crosslinking extent.     

Influence of electron beam irradiation on physicochemical properties of poly(trimethylene carbonate)

Electron beam (EB) irradiation of poly(trimethylene carbonate) (PTMC), an amorphous, biodegradable polymer used in the field of biomaterials, results in predominant cross-linking and finally in the formation of gel fraction, thus enabling modification of physicochemical properties of this material without significant changes in its chemical structure. PTMC films (M_w: 167-553 kg mol⁻¹) were irradiated with different doses using an electron accelerator. Irradiation with a standard sterilization dose of 25 kGy caused neither significant changes in the chemical composition of the polymer nor significant deterioration of its mechanical properties. Changes in viscosity-, number-, weight-, and z-average molecular weights of PTMC for doses lower than the gelation dose (D_g) as well as gel-sol analysis and swelling tests for doses above D_g indicate domination of cross-linking over degradation. EB irradiation can be considered as an effective tool for increasing the average molecular weight of PTMC and sterilization of PTMC-based biomaterials.     

Photo-oxidation of acrylic-urethane thermoset networks. Relating materials properties to changes of chemical structure

Acrylic-urethane thermoset photo-ageing was investigated by various techniques including IR spectroscopy, dynamic-mechanical thermal analysis (DMTA), and micro-hardness testing. These results were used to identify the sites at which the chain oxidation reaction is initiated and the main pathways through which the degradation reaction proceeds. The chemical modifications induced by photo-ageing were qualitatively and quantitatively correlated with the modifications observed in the architecture and mechanical properties of the thermoset network. The results of this work also allow for the development of a quantitative kinetic model based on the identified mechanisms and a multi-scale approach from the molecular to the macroscopic level, which highlights the effect of the changes of the chemical structure on the modification of the macromolecule arrangement and thus on the mechanical properties. Finally, the impact of stabilisers on material ageing was studied.     

A Cleavable Crosslinking Strategy for Commodity Polymer Functionalization and Generation of Reprocessable Thermosets

Covalently crosslinked polymeric materials, known as thermosets, possess enhanced mechanical strength and thermal stability relative to the corresponding uncrosslinked thermoplastics. However, the presence of covalent inter-chain crosslinks that makes thermosets so attractive is precisely what makes them so difficult to reprocess and recycle. Here, we demonstrate the introduction of chemically cleavable groups into a bis-diazirine crosslinker. Application of this cleavable crosslinker reagent to commercial low-functionality polyolefins (or to a small-molecule model) results in the rapid, efficient introduction of molecular crosslinks that can be uncoupled by specific chemical inputs. These proof-of-concept findings provide one potential strategy for circularization of the thermoplastic/thermoset plastics economy, and may allow crosslinked polyolefins to be manufactured, used, reprocessed, and re-used without losing value. As an added benefit, the method allows the ready introduction of functionality into non-functionalized commodity polymers.     

带溴端基的聚氧化乙烯与聚乙烯亚胺的交联反应及阳离子型高吸水树脂

聚氧化乙烯(PEO)和聚乙烯亚胺(PEI)都是广泛应用的水溶性高分子.将PEO二端的羟基转化成活泼的溴端基,再与PEI交联,可以形成亲水性网络.使这种网络转化成季铵盐,便制得了一种新颖的阳离子型高吸水树脂.这种高吸水树脂文献中迄今未见报道.由于网络中存在的是N⁺,它不会与水中Ca²⁺、Mg²⁺及其它重金属离子结合而丧失吸水能力.     

Preparation and Kinetic Modeling of Cross-Linked Chitosan Microspheres Immobilized Zn(II) for Urea Adsorption

The preparation of Zn(II)-immobilized glutaraldehyde-crosslinked chitosan microspheres which was modified with epichlorohydrin, tetraethylenepentamine, and bromoacetic acid was presented in this work. The Zn(II)-immobilized value of the microspheres (Ac-TEPA-CS) is 43.6 mg g^?1, which is higher than the blank microspheres. The adsorption of urea onto Zn-Ac-TEPA-CS was studied in a batch system. Langmuir and Freundlich adsorption models were applied to describe the experimental isotherm and isotherm constant, and the kinetic of adsorption process were estimated. These data fits well with Langmuir isotherm and also indicated that the adsorption process is exothermic and follow the pseudo-second-order kinetics. The adsorption capacity depends upon the pH, the temperature and the initial concentration of urea. It observed that Zn-Ac-TEPA-CS could be repeatedly used by elution and regeneration without significant loss of adsorption capacity.