Condensation from steam—air mixtures in a horizontal annular flow channel

Experiments were performed on the condensation of steam from steam-air mixtures in annular flow at a cooled inner tube. The range of investigation was varied for laminar and turbulent flow for 1.5 × 10³ Re 1.3 × 10⁴ and inlet concentrations 0.59 p_steam/p_total 0.95. The measurements, performed at an open test loop at p_total ≈ 0.96 bar, allowed local heat and mass transfer coefficients to be evaluated for various inlet lengths in the 2 m long annulus. The steam concentration was measured locally inside the annulus with a newly developed dew-point probe. The heat flux was measured locally using the temperature gradient in the cooled inner tube.

Near the inlet region the experiments showed a slightly higher heat flux at the bottom of the tube compared to the top, although it is expected to be smaller there owing to a thicker liquid film. Far downstream from the inlet region the heat transfer at the top was higher than at the bottom. The reasons for these effects are discussed, yielding a better understanding of the thermal and fluid processes involved in condensation from vapor-gas mixtures. The measured data allow the development of correlations for predicting the local Nusselt and Sherwood numbers in a horizontal annular-flow chanbel.     

表面纳米结构及其自由能对滴状冷凝传热的影响

通过抛光和氧化刻蚀方法在基体壁面形成微米和纳米尺度的微观结构,然后制备十八烷基硫醇分子自组装膜,从而得到空气中表观接触角为160°的SAM-1表面和空气中表观接触角为116°的SAM-2表面.实验研究了常压条件下两类表面的滴状冷凝传热特性.结果表明两种表面都能够有效提高冷凝传热效果.但是,具有表面纳米结构的SAM-1表面的滴状冷凝传热特性低于SAM-2表面.分析了纳米结构和液固自由能差效应对滴状冷凝传热影响的共同作用机理.     

玉米芯流化床快速热解制取生物油试验研究

本文在流化床上对玉米芯进行了快速热解制取生物油的试验研究.首先在非催化条件下考察了温度、气体流量、床高和物料粒径对热解产物产率的影响,得到了制取生物油的最优工况.在此工况下进行了催化热解试验,研究了FCC催化剂对热解产物产率和生物油品质的影响.结果表明,最优工况下生物油产率为56.8%.同未加催化剂相比,FCC催化剂的存在使得生物油中油组分和焦炭的产率降低,不凝结气体、水分和焦的产率增加.分级冷凝系统的应用较好的实现了重油、轻油和水的分离.对催化条件下第二级冷凝器收集的生物油分析表明,其油组分的氧含量和高位热值分别为13.64%和36.7 MJ/kg,具有很好的应用前景.     

具有纠缠序参量的玻色-爱因斯坦凝聚体

对最近提出的具有纠缠序参量的玻色-爱因斯坦凝聚体作通俗简要的介绍．在这个凝聚体中，不同种原子间形成自旋纠缠的原子对，而系统就在这个纠缠对上发生玻色-爱因斯坦凝聚.     

Structure and polarity of 8CB films evaporated onto solid substrates

Brewster-angle reflection ellipsometry and surface optical second harmonic generation were used to study the growth of 4'-n-octyl-4-cyanobiphenyl (8CB) films evaporated in air onto polymeric and quartz glass substrates. The layer-by-layer growth of the films terminates after formation of two distinctive interfacial layers. Both of these two layers are polar and tilted. In the first layer the molecules lie nearly flat on the surface, while in the second layer they point on average about 50° toward the surface normal. The dipole moment of the second layer has a lower magnitude and an opposite direction with respect to the dipole moment of the first layer.     

利用PCC技术预测γ射线对肝癌细胞的辐射效应

利用早熟染色体凝集技术预测研究了γ射线对肝癌细胞SMMC-7721的辐射效应。结果表明,G1和G2期细胞内的染色单体和等点染色单体断裂数与照射剂量之间存在线性相关性,染色单体断裂总数与细胞存活率之间存在良好的线性相关性。说明辐射诱导的染色单体断裂可以作为预测SMMC-7721细胞内在辐射敏感性的指标,也可为临床诊断和治疗肝癌提供依据。     

Adsorption of argon and nitrogen in cylindrical pores of MCM-41 materials: application of density functional theory

Adsorption of argon and nitrogen at their respective boiling points in cylindrical pores of MCM-41 type silica-like adsorbents is studied by means of a non-local density functional theory (NLDFT), which is modified to deal with amorphous solids. By matching the theoretical results of the pore filling pressure versus pore diameter against the experimental data, we arrive at a conclusion that the adsorption branch (rather than desorption) corresponds to the true thermodynamic equilibrium. If this is accepted, we derive the optimal values for the solid-fluid molecular parameters for the system amorphous silica-Ar and amorphous silica-N₂, and at the same time we could derive reliably the specific surface area of non-porous and mesoporous silica-like adsorbents, without a recourse to the BET method. This method is then logically extended to describe the local adsorption isotherms of argon and nitrogen in silica-like pores, which are then used as the bases (kernel) to determine the pore size distribution. We test this with a number of adsorption isotherms on the MCM-41 samples, and the results are quite realistic and in excellent agreement with the XRD results, justifying the approach adopted in this paper.     

三维非谐势阱中玻色－爱因斯坦凝聚的数值计算

本文从G－P平均势场理论出发,探讨了三维球对称非谐势阱中玻色－爱因斯坦凝聚(BEC)的G－P方程;用数值计算方法研究了三维球对称非谐势阱中原子间有相互作用的玻色－爱因斯坦凝聚气体的基态解;分析了非谐振势能项对玻色－爱因斯坦凝聚体的分布、能量和化学势的影响。     

R134a在板式换热器中的凝结换热实验研究

本文对R134a在板式换热器内的凝结换热特性进行了实验研究,通过测量换热器中冷却水及板壁温度获得了局部凝结换热系数随蒸气干度、质量流量及热流密度的变化关系.实验结果表明,凝结换热系数随着蒸气干度增加而增加.文章还将实验结果与部分文献数据进行了比较与分析.本文的研究为换热准则关系式的发展提供了实验数据.     

Renormalized dispersion of elementary excitations in spinor polariton condensates

We analyse the polarization of spinor polariton condensates and corresponding dispersions of elementary excitations. We have considered the effects of magnetic field induced splitting in circular polarizations and residual splitting in linear polarizations in the ground state provided by the cavity asymmetry. We show that anisotropic polariton–polariton interactions fully compensate the Zeeman splitting in circular polarizations below the critical magnetic field, thus leading to the spin-Meissner effect for the polariton condensates. We also analyzed the effect of polariton–polariton interactions on the stability of the gap in linear polarizations characteristic for anisotropic microcavities. It was shown that in realistic systems this gap increases with concentration of the particles, thus contributing to the stability of the pinning of linear polarization of photoemission in semiconductor microcavities for pump intensities above the stimulation threshold.