Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.     

Development and Validation of a High Performance Liquid Chromatographic Method for the Determination of Voriconazole Content in Tablets

This paper describes the validation of an isocratic HPLC method for the assay of voriconazole in tablets. The method employs a Merck LiChrospher^? 100 RP-8 (125 × 4.6 mm I.D., 5 μm particle size) column, with a mobile phase of methanol : triethylamine solutions 0.6 %, pH 6.0 (50:50, v/v) and UV detection at 255 nm. A linear response (r > 0.9999) was observed in the range of 20.0–100.0 μg mL⁻¹. The method showed good recoveries (average 100.4%) and the relative standard deviation intra and inter-day were ≤ 1.0 %. Validation parameters as specificity and robustness were also determined. The method can be used for both quality control assay of voriconazole in tablets and for stability studies as the method separates voriconazole from its degradation products and tablet excipients.     

Preparation of 5-diaminomethylenebarbiturates by barbituric acid addition to carbodiimides

Through NMR spectroscopic monitoring of barbituric acid addition to carbodiimide, a general synthetic procedure for the preparation of 5-diaminomethylenebarbiturates (DABA) was developed. This procedure is very simple and applicable to the preparation of large quantities of DABA derivatives. Through an X-ray structural study of one of the DABA derivatives, it was established that these compounds have an ylide-type structure with strong charge separation within the molecule.     

锂离子电池用纳米Sn/SnSb合金三维复合负极的制备及性能

采用多步电沉积法制备的三维多孔铜箔作为集流体、低温液相化学还原法制备的纳米Sn/SnSb 合金作为负极材料, 制备出一种新型三维多孔结构的纳米Sn/SnSb合金复合负极. 通过与普通负极电化学性能的对比实验发现, 这种新型三维复合负极具有如下优点: 三维多孔网络结构提高了负极活性材料与集流体之间的结合力, 使不含粘结剂电极的制备成为可能; 有效缓解了高容量负极活性材料在充放电过程中的体积膨胀, 提高了负极活性材料的循环性能, 当循环到第30周时, 普通负极剩余容量为初始容量的33%, 而三维复合负极剩余容量为初始容量的41%; 三维铜箔集流体的特殊结构为高容量负极活性材料提供了一个良好的导电环境, 使电极反应进行得更加完全, 从而获得了更高的电极比容量, 普通负极初始容量为480 mAh·g-1, 而三维复合负极达到了800 mAh·g-1. 纳米Sn/SnSb合金三维复合负极良好的电化学性能为锂离子电池负极结构的设计开发提供了新的思路.     

Obtainment of chelating agents through the enzymatic oxidation of lignins by phenol oxidase

Oxidation of lignin obtained from acetosolv and ethanol/water pulping of sugarcane bagasse was performed by phenol oxidases: tyrosinase (TYR) and laccase (LAC), to increase the number of carbonyl and hydroxyl groups in lignin, and to improve its chelating capacity. The chelating properties of the original and oxidized lignins were compared by monitoring the amount of Cu²⁺ bound to lignin by gel permeation chromatography. The Acetosolv lignin oxidized with TYR was 16.8% and with LAC 21% higher than that of the original lignin. For ethanol/water lignin oxidized with TYR was 17.2% and with LAC 18% higher than that of the original lignin.     

Coupling and Cyclization of Sydnone Compounds

Cyclization were occurred via the coupling reactions of some mercuric chloride derivatives of sydnone with LiPdCl₃-CuCl₂. A unique six-membered ring, 3,3′-ethylene-4,4′-bissydnone, was obtained by the cyclization reation of 1,2-di[3-(4-chloromercuric)sydnonyl]ethane. However, the seven-membered 3,3′-trimethylene-4,4′-bissydnone and 1,3-di[3-(4-chloro)sydnonyl]-propane were obtained from the corresponding mercuric chlroide of sydnone. Onyl substitution reaction took place when 4,4′-di[3-(4-chloromercuric)sydnonyl]biphenyl, 4,4′-di[3-(4-chloromercuric)sydnonyl]benzene, di(p-[3-(4-chloromercuric)sydnonyl]-phenyl}methane and, di(p-[3-(4-chloromercuric)sydnonyl]phenyl]ether were treated using the same process.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

Impregnated silica-based layers in thin layer chromatography

Abstract

Impregnated thin-layer chromatography (TLC) layers based on silica gel are presented. Impregnating agents such as metal cations, inorganic ions, chelating agents, chiral selectors, surfactants, ion-pairing reagents, and ionic liquids are discussed. The role of impregnated TLC layers in medicinal chemistry is highlighted. The historical overview of TLC separations on physically coated layers is given and some future prospects ahead of this technique are discussed.     

A bifunctional platinum(II) complex capable of intercalation and hydrogen-bonding interactions with DNA: binding studies and cytotoxicity

The interactions of [Pt(CNN)(4-dpt)]PF(6), (1; 4-dpt=2,4-diamino-6-(4-pyridyl)-1,3,5-triazine, HCNN=6-phenyl-2,2'-bipyridine) with double-stranded DNA, poly(dA-dT)(2), and poly(dG-dC)(2) were examined by spectroscopic, electrophoretic, and hydrodynamic methods. The spectroscopic data were analyzed with McGhee, van't Hoff, and Gibbs-Helmholtz equations. In a comparative study, [Pt(CNN)(py)]PF(6) (2; py=pyridine) was prepared and the nature of its binding towards DNA was investigated [preliminary results: ChemBioChem 2003, 4, 62-68]. For reactions with calf thymus DNA at 20 degrees C, the intrinsic binding constants for 1 and 2 are (4.6+/-0.2)x10(5) and (2.3+/-0.3)x10(4) mol(-1) dm(3), respectively. Results of DNA-binding reactions revealed that 1 and 2 preferentially bind to the AT sequence of duplex DNA. Intercalation is the preferred binding mode for 2, whereas both intercalation and minor-groove binding are observed for 1. Complex 1 is cytotoxic against a number of carcinoma cell lines, including KB-3-1, CNE-3, and HepG2, and remains potent against multidrug- or cisplatin-resistant KB-V-1 and CNE1 cell lines, for which the resistance ratios are 1.6 and 1.5, respectively. Importantly, 1 is almost an order of magnitude less toxic to the normal cell line CCD-19Lu (IC(50)=176+/-1.7 microM) and it selectively induced apoptosis leading to cancer cell death with less than 5 % detectable necrosis.