Development and validation of a rapid high-performance liquid chromatography method for the quantification of exenatide

The objective was to develop a simple HPLC method to quantify exenatide—a 39 amino acid residue incretin mimetic used in diabetes therapy. To date, only non‐validated, sometimes incomplete, gradient methods have been reported in the literature. Isocratic separation was achieved using a C₄ column and a mixed solvent system, A–B–C (48:45:7, v/v/v; pH* 5.2), where A represents KH₂PO₄ (pH 4.5; 0.1 m ) and MeCN (60:40, v/v), B corresponds to NaClO₄·H₂O (pH 6.0; 0.2 m ) and MeCN (60:40, v/v), and C is water. Exenatide eluted at 3.64 min and the total run time was 6 min. The method was specific and the response was accurate, precise and linear from 0.75 to 25 µg/mL. It was used to quantify exenatide transport across intact and laser‐porated porcine skin in vitro as a function of laser fluence [0 (i.e. intact skin), 9 and 15 J/cm², respectively]. Although no permeation was observed using intact skin, cumulative exenatide permeation after 8 h through laser porated skin was 9.6 ± 6.5 and 12.4 ± 6.4 µg/cm² at fluences of 9 and 15 J/cm², respectively. This is the first validated isocratic method for exenatide quantification and it may be of use in quality control analysis and with other biological matrices. Copyright © 2010 John Wiley & Sons, Ltd.     

高效凝胶渗透色谱法检测马初乳中的免疫球蛋白G

建立了高效凝胶渗透色谱(HPGPC)测定马初乳中免疫球蛋白G(IgG)含量的方法。采用TOSOH TSK-G4000PWXL色谱柱(300 mm×7.8 mm, 5 μm)分离,以0.05 mol/L磷酸盐缓冲液(pH 6.9)为流动相,流速0.8 mL/min,检测波长280 nm,温度25 ℃。结果表明: 免疫球蛋白G的线性范围为0.2～3.0 g/L(r2=0.9995),平均回收率为97.47%,相对标准偏差(RSD)为1.22%,检出限(信噪比为10)为0.08 mg/L,方法的稳定性、精密度和重现性(以峰面积的RSD计)分别为2.86%、1.62%、1.82%。在优先满足小马哺育的前提下,采集新疆昭苏马场中两个不同品种马匹的马乳,于低温保存,在4 ℃和12000 r/min下30 min内离心两次,制得乳清,测得第一次泌乳时,IgG含量在2 h时高达35.0～50.0 g/L,而在72 h后,马乳中IgG含量迅速下降为2.0～4.0 g/L。该方法前处理过程简单、快速,方法简便、准确、重现性好、精密度高,适合作为马初乳中IgG的检测方法。     

凝胶渗透色谱净化-超高效液相色谱-串联质谱法测定皮革制品中7种尼泊金酯类防腐剂

利用超高效液相色谱-串联质谱(UPLC-MS/MS)结合凝胶渗透色谱(GPC)技术,建立了一种快速分离和测定皮革制品中7种尼泊金酯类防腐剂的分析方法。样品经超声提取、浓缩、GPC净化,甲醇-水溶液(1:1, v/v)溶解,采用Acquity UPLCBEH C18柱(50 mm×2.1 mm, 1.7 μm)分离,以甲醇和水为流动相,梯度洗脱,电喷雾负离子模式电离,采用多反应监测模式检测和外标法定量。该方法在0.1～1.0 mg/L范围内线性关系良好(r＞0.99);在添加量为0.5～3.0 mg/kg时,平均回收率为(79.44±5.67)%～(98.07±9.50)%,相对标准偏差(RSD)为4.24%～14.00%;方法的检出限(LOD)为4～12 μg/kg,定量限(LOQ)为13.2～39.6 μg/kg。该方法操作简便、快捷、灵敏、准确,适合皮革中多种尼泊金酯类防腐剂的确证和定量测定。     

气相色谱-质谱法同时测定菠菜中4种二缩甲酰亚胺类杀菌剂的残留量

提出了气相色谱-质谱法同时测定菠菜中乙烯菌核利、乙菌利、腐霉利和异菌脲等4种二缩甲酰亚胺类杀菌剂残留量的方法。样品用丙酮-正己烷（1＋4）混合溶剂提取,所得提取液用凝胶色谱进行净化。采用气相色谱分离后,选择离子监测模式下质谱法进行测定。乙烯菌核利、乙菌利、腐霉利和异菌脲的检出限（3S/N）分别为0.01,0.01,0....     

气体分子在二维石墨烯纳米孔中的选择性渗透特性

二维石墨烯纳米孔中气体分子的选择性渗透对多孔石墨烯分离膜非常重要。本文采用分子动力学方法研究了气体分子在氮氢修饰石墨烯纳米孔中的渗透特性,从分子的大小和结构、纳米孔的构型以及分子与石墨烯之间的作用强度等角度阐明了分子出现选择性渗透的原因。结果表明,不同分子的渗透率不同,即H₂O＞H₂S＞CO₂＞N₂＞CH₄。渗透率跟分子的质量和直径以及分子在石墨烯表面上的吸附密度有关;根据气体分子动理学理论,渗透率跟分子质量成反比关系;而分子在石墨烯表面上的高吸附密度对渗透起促进作用。对于H₂O和CH₄分子,分子直径起主导作用;H₂O分子直径最小,其渗透率最大;同理,CH₄分子的渗透率最小。对于H₂S和CO₂分子,H₂S分子的直径较大,但其与石墨烯之间的作用强度较大(吸附密度较高),导致渗透率较高;对于CO₂和N₂分子,CO₂分子的直径较小,并且与石墨烯之间的作用强度较大,渗透率较高。同时发现,分子在纳米孔中的渗透使得其在石墨烯表面的密度分布极不均匀。纳米孔左右两侧的功能化氮原子使CH₄分子容易从孔两侧区域穿过,而其它分子由于直径较小在纳米孔中心区域穿过的概率最大。分子与石墨烯之间的作用越强,导致分子在石墨烯表面区域内停留的时间越长,最终使其在渗透纳米孔的过程中所经历的时间越长。本文所采用的氮氢修饰石墨烯纳米孔中,分子渗透速率达到~10^-3 mol·s^-1·m^-2·Pa^-1,并且其它分子相对于CH₄分子的选择性也很高,说明基于该类型纳米孔的多孔石墨烯分离膜在天然气处理等工业气体分离领域具有很好的应用前景。     

Rb-N_2(He)蒸气室压强及He、N_2气渗漏测量

利用原子吸收及谱线增宽方法测量了Rb-N_2(He)蒸气室中的气体压强.对Rb-N_2(He)蒸气室中的气体渗漏进行了检测,实验发现:对N_2气几乎观察不到明显的渗漏现象.对于Rb-He950torr的高压蒸气室60天后的气体渗漏量为19%,渗漏比较明显.测量了223-638torr范围Rb-N_2蒸气室的5P_(3/2)—5P_(1/2)精细结构碰撞转移截面.结果表明,随着温度升高,碰撞转移截面值也升高,温度为50℃、60℃、70℃时,碰撞转移截面分别为(1. 03±0. 32)×10~(-16)cm~2、(1. 36±0. 38)×10~(-15)cm~2、(8. 96±1. 02)×10~(-15)cm~2.压强在638torr时,碰撞转移截面随着温度升高增加较快,70℃以后碰撞转移截面迅速增加.     

Preparation,Characterization and Permeation Study of Topical Gel Loaded with Transfersomes Containing Asiatic Acid

The objective of this study is to investigate the in vitro permeation of asiatic acid (AA) in the form of a topical gel after entrapment in transfersomes by Franz diffusion cells. Transfersomes composed of soybean lecithin and three different edge activators including Tween 80 (TW80), Span 80 (SP80) and sodium deoxycholate (SDC) at the ratio of 50:50, 90:10 and 90:10, respectively, together with 0.3% w/w of AA, were prepared by a high-pressure homogenization technique and further incorporated in gels (TW80AATG, SP80AATG and SDCAATG). All transfersomal gels were characterized for their AA contents, dynamic viscosity, pH and homogeneity. Results revealed that the AA content, dynamic viscosity and pH of the prepared transfersomal gels ranged from 0.272 ± 0.006 to 0.280 ± 0.005% w/w, 812.21 ± 20.22 to 1222.76 ± 131.99 Pa.s and 5.94 ± 0.03 to 7.53 ± 0.03, respectively. TW80AATG gave the highest percentage of AA penetration and flux into the Strat-M^® membrane at 8 h (8.53 ± 1.42% and 0.024 ± 0.008 mg/cm²/h, respectively) compared to SP80AATG (8.00 ± 1.70% and 0.019 ± 0.010 mg/cm²/h, respectively), SDCAATG (4.80 ± 0.50% and 0.014 ± 0.004 mg/cm²/h, respectively), non-transfersomal gels (0.73 ± 0.44 to 3.13 ± 0.46% and 0.002 ± 0.001 to 0.010 ± 0.002 mg/cm²/h, respectively) and hydroethanolic AA solution in gel (1.18 ± 0.76% and 0.004 ± 0.003 mg/cm²/h, respectively). These findings indicate that the TW80AATG might serve as a lead formulation for further development toward scar prevention and many types of skin disorders.     

High‐Density Polyethylene Micro‐ and Nanocomposites: Effect of Particle Shape,Size and Surface Treatment on Polymer Crystallinity and Gas Permeability

Summary: High‐density polyethylene (HDPE) micro‐ and nanocomposites with spherical and platelike inclusions were prepared and the effect of filler particles on polymer crystallinity and gas permeability was investigated. Platelike inclusions strongly reduce the polymer permeability coefficient, while spherical ones have no influence on it, irrespective of their size. The reduction in gas permeability depends on the average aspect ratio of the inclusions, which in turn depends on the exfoliation of the organo‐montmorillonites (OM) and consequently on its surface treatment.

A TEM micrograph of 3 vol.‐% 2C18 · M‐HDPE nanocomposite, showing partial exfoliation of the organo‐montmorillonite.     

Stretchable Gas Barrier Achieved with Partially Hydrogen‐Bonded Multilayer Nanocoating

Super gas barrier nanocoatings are recently demonstrated by combining polyelectrolytes and clay nanoplatelets with layer‐by‐layer deposition. These nanobrick wall thin films match or exceed the gas barrier of SiO_x and metallized films, but they are relatively stiff and lose barrier with significant stretching (≥10% strain). In an effort to impart stretchability, hydrogen‐bonding polyglycidol (PGD) layers are added to an electrostatically bonded thin film assembly of polyethylenimine (PEI) and montmorillonite (MMT) clay. The oxygen transmission rate of a 125‐nm thick PEI‐MMT film increases more than 40x after being stretched 10%, while PGD‐PEI‐MMT trilayers of the same thickness maintain its gas barrier. This stretchable trilayer system has an OTR three times lower than the PEI‐MMT bilayer system after stretching. This report marks the first stretchable high gas barrier thin film, which is potentially useful for applications that require pressurized elastomers.