Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.     

An unprecedented highly efficient solvent-free oxidation of alkynes to α,β-acetylenic ketones with tert-butyl hydroperoxide catalyzed by water-soluble copper complex

The catalytic system composed of CuCl₂ and 2,2′-biquinoline-4,4′-dicarboxylic acid dipotassium salt (BQC) was found to be highly efficient for the selective α-oxidation of internal alkynes to the corresponding α,β-acetylenic ketones, with aqueous tert-butyl hydroperoxide under mild conditions. For the first time, full conversions of alkynes were reached with excellent selectivities, and propargylic tert-butylperoxy ethers were observed and suggested as the reaction intermediates. In the case of terminal alkynes, the oxidations are sluggish and low yields ranging from 32% to 40% were obtained.     

Stabilisation of heterobimetallic networks by crown ethers and hydrogen-bonding in [Ni(H2O)6][Cu3Cl8(H2O)2] · (15-crown-5)2 · 2H2O: Structure and magnetism

[Ni(H₂O)₆][Cu₃Cl₈(H₂O)₂] · (15-crown-5)₂ · 2H₂O can be conveniently prepared by the interaction of NiCl₂ · 6H₂O, CuCl₂ · 2H₂O and 15-crown-5 in water. The X-ray crystal structure reveals an ionic complex involved in a hydrogen-bonded two dimensional network with the [Ni(H₂O)₆]²⁺ and [Cu₃Cl₈(H₂O)₂]²⁻ ions sandwiched between the 15-crown-5 macrocycles. The magnetic susceptibility data (4–300 K) and magnetisation isotherms (2–5.5 K; 0–5 T) are best interpreted in terms of intra-trimer ferromagnetic coupling within the [Cu₃Cl₈(H₂O)₂]²⁻ moieties, with J ∼ 6 cm⁻¹, and antiferromagnetic coupling between the trimers, the latter mediated by H-bonding pathways. Comparisons are made to other reported quaternary ammonium salts of [Cu₃Cl₈]²⁻ and [Cu₃Cl₁₂]⁶⁻, most of which display structures that involve close stacking of such Cu(II) trimers, rather than being of the present isolated, albeit H-bonded, types.     

Ascorbic Acid Oxidation at Nonmodified and Copper‐Modified Polyaniline and Poly‐ortho‐methoxyaniline Coated Electrodes

The electrochemical oxidation of ascorbate ions is comparatively studied at polyaniline (PANI) and poly‐ortho‐methoxyaniline (POMA) layers in absence and presence of electrodeposited copper species. In comparison to PANI, POMA layers allow decreasing the overpotential necessary for driving the ascorbate oxidation reaction. A nonlinear dependence of the ascorbate oxidation current on the polymer layer redox charge is found. Copper electrodeposited in PANI and POMA layers is electrocatalytically active for the investigated reaction. Two separate oxidation waves are observed in the case of Cu‐PANI whereas a single ascorbate oxidation wave and enhanced currents are found in the Cu‐POMA case.     

Ultrafast O2 activation by copper oxide for 2,4-dichlorophenol degradation: The size-dependent surface reactivity

This study demonstrated interesting ultrafast activation of molecular O₂ by copper oxide (CuO) particles and very rapid elimination of aqueous 2,4-dichlorophenol (2,4-DCP) within reaction time of 30 s. Electron paramagnetic resonance (EPR) characterization indicated that OH, Cu³⁺, ¹O₂ and O₂⁻ were generated in the CuO/O₂ systems, wherein O₂⁻ would be the main reactive species responsible for 2,4-DCP degradation. It was further found that the catalytic ability of CuO for O₂ activation was highly size dependent and nano-CuO was far reactive than micro-CuO. H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM) analyses revealed that both the quantity and the reactivity of the surface reaction sites (surface Cu⁺ and O₂) could determine the catalytic ability of CuO affecting efficient Cu⁺-based molecular oxygen activation. Moreover, the O₂ activation ability of CuO would depend on not only the dimension, but also crystalline factors, for example, the exposed facets.     

Artificial neural networks study of the catalytic reduction of resazurin: stopped-flow injection kinetic-spectrophotometric determination of Cu(II) and Ni(II)

An artificial neural network (ANN) procedure was used in the development of a catalytic spectrophotometric method for the determination of Cu(II) and Ni(II) employing a stopped-flow injection system. The method is based on the catalytic action of these ions on the reduction of resazurin by sulfide. ANNs trained by back-propagation of errors allowed us to model the systems in a concentration range of 0.5-6 and 1-15 mg l⁻¹ for Cu(II) and Ni(II), respectively, with a low relative error of prediction (REP) for each cation: REP_Cu(II) = 0.85% and REP_Ni(II) = 0.79%. The standard deviations of the repeatability (s_r) and of the within-laboratory reproducibility (s_w) were measured using standard solutions of Cu(II) and Ni(II) equal to 2.75 and 3.5 mg l⁻¹, respectively: s_r[Cu(II)] = 0.039 mg l⁻¹, s_r[Ni(II)] = 0.044 mg l⁻¹, s_w[Ni(II)] = 0.045 mg l⁻¹ and s_w[Ni(II)] = 0.050 mg l⁻¹. The ANNs-kinetic method has been applied to the determination of Cu(II) and Ni(II) in electroplating solutions and provided satisfactory results as compared with flame atomic absorption spectrophotometry method. The effect of resazurin, NaOH and Na₂S concentrations and the reaction temperature on the analytical sensitivity is discussed.     

不同取向的CoSb3纳米线阵列的电化学法制备

近年来,金属纳米线及其阵列由于其新奇的物理和化学特性和在纳米器件方面潜在的应用前景,越来越受到人们的关注。氧化铝模板合成一维纳米材料具有设备简单、制作方便等优点,因而成为近年来人们常用的一种方法。利用电化学沉积的方法在多孔氧化铝模板中沉积各种成分的纳米线已成为纳米材料制备的一种常见的方法。这种方法不仅可以得到大面积有序的纳米线阵列,还可以根据需要调节孔洞的大小来控制纳米线的直径[1￣3]。最近理论研究结果预言[4￣6],由于纳米材料的量子限域效应,热电材料的纳米线将有比其相应块体材料更高的品质因数n,这极大地激…     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).     

Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).     

ACu9X4 ‐ Neue Verbindungen mit der CeNi8, 5Si4, 5‐Struktur (A: Sr,Ba; X: Si,Ge)

ACu₉X₄ ‐ New Compounds with CeNi_{8, 5}Si_{4, 5} Structure (A: Sr, Ba; X: Si, Ge) The new compounds SrCu₉Si₄ (a = 8.146(1), c = 11.629(2)Å), BaCu₉Si₄ (a = 8.198(2), c = 11.735(2)Å), SrCu₉Ge₄ (a = 8.273(2), c = 11.909(5)Å), and BaCu₉Ge₄ (a = 8.338(4), c = 12.011(7)Å) are formed by reaction of the elements at 1000° ‐ 1100 °C. They are isotypic (I4/mcm, Z = 4) and crystallize in an ordered variant of the cubic NaZn₁₃ type structure, also built up by the binary phase BaCu₁₃. In the ternary compounds the positions of Cu2 are orderly occupied by copper and silicon and germanium, respectively. This results in a lowering of symmetry and a distortion of the polyhedra. The metallic conductivity of the compounds was confirmed by measurements on BaCu₉Si₄.