火焰原子吸收光谱法测定鸭粪中铜和锌的含量

采用火焰原子吸收光谱法测定白洋淀生态养鸭场中饲料及鸭粪中的铜和锌含量,测定结果为饲料中的铜含量范围在9.7-61.55mg/kg,锌含量范围在63.14-149.07mg/kg,在禽类饲料中铜、锌含量属于较低的类型;鸭粪中铜含量范围在13.71-94.74mg/kg,锌含量范围在156.98-346.31mg/kg,参...     

Methanethiolate structural phases on Cu{1 1 1} observed using a novel fibre-optic low-energy electron diffraction instrument

We have used a novel fibre-optic low-energy electron diffraction (FO-LEED) instrument, capable of low flux measurements that minimise electron beam damage to surface overlayers, to study methanethiolate (CH₃-S-) structural phases formed on Cu{1 1 1} at temperatures between 110 and 300 K. Three structural phases were seen: a (√3 × √3)R30° phase that forms at 110-140 K; a (4 × 4) phase which was observed transiently at 110 K; and a pseudo-{1 0 0} reconstructed phase which forms at room temperature. We discuss these in the context of previous studies of this system, and demonstrate the ability of the FO-LEED instrument to record high-quality LEED patterns and intensity data from a strongly beam-sensitive surface.     

KLL Auger resonant Raman transition in metallic Cu and Ni

High energy resolution KL₂₃L₂₃ Auger spectra of polycrystalline Cu and Ni were measured using photon energies up to about 50 eV above the K-absorption edge and down to 5 eV (Cu KLL) and 4 eV (Ni KLL) below threshold. The spectra show strong satellite structures varying considerably as a function of the photon energy. In the sub-threshold region the linear dispersion of the diagram line energy positions and a distortion of the line shape as a function of photon energy, attributable to the Auger resonant Raman process, is clearly observed, indicating the one-step nature of the Auger emission. These changes in the resonant spectra are interpreted using a simple model based on resonant scattering theory in combination with partial density of states obtained from cluster molecular orbital (DV-Xα) calculations.     

The electrochemical reactivity of the NiP<Subscript>3</Subscript> skutterudite-type phase with lithium

We report the electrochemical Li reactivity of the cubic NiP₃ phase, a candidate for anode applications for Li-ion batteries. NiP₃ reacts with nine lithium per formula unit leading to a first cycle reversible capacity of 1,475 mAh/g at an average potential of 0.9 V vs. Li+/Li°. Electrochemical measurements and complementary X-ray diffraction showed that NiP₃ presents a conversion process competing with an insertion process. A good cycleability may only be obtained on a limited potential window, excluding the low-potential region. This paper was presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007.     

赤铁矿和三羟铝石吸附Cu~(2+)的红外光谱研究

应用红外光谱法,研究了不同pH值和Cu2+浓度条件下,合成赤铁矿和三羟铝石吸附Cu2+后表面羟基结构及其特征吸收峰的变化。结果表明:(1)随Cu2+浓度增加,赤铁矿表面H—O—H和OH的变形振动参与了吸附反应,Cu2+强烈地缔结在Fe—O上,形成了Fe—O—(Cu)结构。(2)酸性条件下,H+破坏了赤铁矿表面的O—H结构,NO3-促使弱峰1 131 cm-1的产生。随pH值增大,赤铁矿表面OH-逐渐由伸缩振动转变为变形振动,Fe—OH和Fe3+—O2-结构不断发生改变。(3)三羟铝石对Cu2+的吸附发生在高波位,随Cu2+浓度增大,其表面游离羟基的O—H弯曲振动、水分子的OH-伸缩振动和H—O—H弯曲振动均参与了吸附反应,Al—O基中的Al3+渐被Cu2+取代从而加强了较低波位的振动强度。(4)随pH值增加,三羟铝石Al—OH的弯曲振动和Al—O的伸缩振动逐渐发生着改变,表明吸附Cu2+后,在其表面形成了AlOCu+与AlOCuOH结构。     

Cyclic voltammetry of nitrophenyl N‐glycosides on mercury electrode

Ten nitrophenyl N‐glycosides have been studied electrochemically in neutral (at pH 7) water–organic solutions by cyclic voltammetry using static mercury drop electrode. For all compounds under investigation the two electrochemical processes have been observed: the four‐electron irreversible reduction of their nitro groups to the corresponding phenylhydroxylamine derivatives, as well as the two‐electron quasi‐reversible process between phenylhydroxylamine and nitroso derivatives. For three compounds the additional electrochemical processes have been also observed, which can be connected with the formation of azoxybenzene derivatives. The potentials of both redox processes: a two‐electron quasi‐reversible R? NHOH/R? NO (E_f) and four‐electron irreversible R? NO₂/R? NHOH (E_pc(I)) systems have been determined and discussed according to crystal structures of selected compounds. E_f and E_pc(I) depended strongly on the positive mesomeric effect (caused by glycosidic nitrogen atom), as well as on the intramolecular hydrogen bond between electroactive nitro group and the hydrogen atom at the glycosidic atom observed in N‐o‐nitrophenyl‐2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosylamine. Moreover, the chirality of selected reactants has had the pronounced effect on the E_pc(I). Copyright © 2011 John Wiley & Sons, Ltd.     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

Atomic short-range order in CuMn alloys

The establishment of atomic short-range order (SRO) has been investigated in CuMn alloys (5, 8,13,16,20 at. % Mn) by measurement of the electrical resistivity during isochronal and isothermal annealing. An increasing degree of SRO is accompanied by a reduction of resistivity; this effect increases with Mn concentration. For 8,13 and 16 at. % Mn SRO kinetics turn out to deviate significantly from single exponential behavior with a maximum at 13 at. % Mn, whereas at 5 and 20 at. % Mn SRO is adjusted in a single exponential process. For data analysis three methods are used: a sum of two and three exponentials as well as a log-normal spectrum of relaxation times. The strong interaction between second-nearest-neighbor atoms in CuMn seems to be essential for SRO kinetics but of minor importance for the value of SRO-induced resistivity change.     

纳米TiO2叶片状阵列电极的制备及其在染料敏化太阳电池中电子的输运性能

在低温条件下采用定向刻蚀技术, 对金属Ti片表面用H₂O₂溶液进行刻蚀氧化, 制备了垂直生长的纳米TiO₂叶片状阵列薄膜电极. 通过X射线衍射分析表明, 纳米TiO₂叶片状阵列薄膜经500 ℃下烧结1 h后, 从无定型转变为锐钛矿相. 场发射扫描电子显微镜观察表明: 在80 ℃下的H₂O₂溶液刻蚀氧化, 经1 d制备得到的是Ti片表面垂直生长的叶片状阵列, 其形貌均匀且完整地 关键词： 2')" href="#">纳米TiO₂ 叶片状阵列电极 染料敏化太阳电池 电子传输     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。