一种新的乙酰胆碱酶电极的研究

本文制备了一种以溶剂聚合膜ＰＨ电极作原电极，经高碘酸钠活化的醋酸纤维膜固定乙酰胆碱酯酶的乙酰胆碱生物电极。研究了酶固定化条件的影响，测得静态和动力学条件下的线性中响应范围分别为２４０－１３００μｇ／ｍＬ和３００－１７００μｇ／ｍＬ将电极用于实际样品的回收率试验中，获得了满意的结果。     

Cu(phen)22+与6-巯基嘌呤及DNA间的相互作用

在Tris-NaCl（pH=7.2）缓冲溶液中,应用伏安法、电子吸收光谱分析、溴化乙锭荧光分析、粘度测量和琼脂糖凝胶电泳等技术研究了Cu（phen）2^2＋（phen=1,10-邻菲咯啉）与6-巯基嘌呤（6-MP）及DNA间的相互作用。结果表明,Cu（phen）2^2＋与6-MP发生了明显的相互作用,其作用产物不仅与小牛胸腺DNA具有更强的相互作用,并且在H2O2和抗坏血酸存在下对质粒pBR322 DNA具有更强的断裂能力,与DNA的作用模式可能为部分插入模式。     

Studies on Solid State Reactions of Coordination Compounds（LXXI）──Solid State Reactions of o－Aminobenzoic Acid with Copper（Ⅱ） Acetate and Formate at Room Temperature

ＳｔｕｄｉｅｓｏｎＳｏｌｉｄＳｔａｔｅＲｅａｃｔｉｏｎｓｏｆＣｏｏｒｄｉｎａｔｉｏｎＣｏｍｐｏｕｎｄｓ（ＬＸＸＩ）──ＳｏｌｉｄＳｔａｔｅＲｅａｃｔｉｏｎｓｏｆｏ－ＡｍｉｎｏｂｅｎｚｏｉｃＡｃｉｄｗｉｔｈＣｏｐｐｅｒ（Ⅱ）ＡｃｅｔａｔｅａｎｄＦｏｒｍ...     

Investigation of the electrocatalytic behavior of single-wall carbon nanotube films on an Au electrode

The voltammetric behavior of uric acid (UA) was studied with an Au electrode modified with single-wall carbon nanotubes (SWNTs). In 0.1 M HAc-NaAc buffer solution (pH 5.0), the SWNT-modified electrode shows high electrocatalytic activity toward UA oxidation. The electro-oxidation of UA is an irreversible diffusion-controlled process with a diffusion coefficient (D) of 8.85×10⁻⁶ cm² s⁻¹. The peak current increases linearly with the concentration of UA in the range of 4.0×10⁻⁶-7.0×10⁻⁴ M. The detection limit is 1.0×10⁻⁶ M. The SWNT was characterized with scanning electron microscopy (SEM). Furthermore, the SWNT-modified electrode has favorable electrocatalytic activity toward dopamine and norepinephrine. This SWNT-modified electrode can also separate the electrochemical responses of uric acid, norepinephrine and ascorbic acid.     

低电流密度下恒电流法制备的聚苯胺修饰电极

研究了低电流密度下恒电流法制备的聚苯（ＰＡ）修饰电极的性质及其影响因素，探讨了低电流密度聚合的ＰＡ膜的优点。发现此种条件下聚合的ＰＡ膜具有较好的电荷传输能力，它不仅对Ｂｒ＾－，Ｔｌ＾＋／Ｔｌ等电对的氧化还原反应有更好的电催化活性，而且对Ｈ＾＋的Ｎｅｒｎａｓｔ响应也更接近理论值。     

Dicopper(I) oxalate complexes as molecular precursors for the deposition of copper compounds

The synthesis, characterization, and thermal decomposition behavior of dicopper(I) oxalato complexes L₄Cu₂(C₂O₄) (L = CNtBu (2a), CNCMe₂CH₂tBu (2b), CNC₆H₃Me₂-2,6 (2c)) is reported. 2c can be prepared in a straightforward manner by the reaction of stoichiometric amounts of Cu₂O and oxalic acid with four equivalents of CNC₆H₃Me₂-2,6, while those complexes with aliphatic isocyanides are better prepared from a copper(I) oxalato complex with alkine capping ligands (Me₃SiCCSiMe₃)₂Cu₂(C₂O₄) (1) via ligand exchange. Crystallographic and spectroscopic evidence for 2a-c confirms the anticipated dinuclear structure with the oxalate in a μ-1,2,3,4 bridging mode and an essentially σ-character of the terminal isocyanides. In solid form the complexes are stable at room temperature and can be handled in air for some time. Their decomposition was studied by thermal gravimetric analysis coupled with mass spectrometry, and the degradation pathway was shown to depend on the type of isocyanide capping ligand. Decomposition of 2a,b takes place between 150 and 200 °C to give CuCN in a clean process that involves isobutene elimination from the terminal ligands, with elimination of (CN)₂ and conversion to elemental copper at higher temperatures. Heating of 2c leads to CuO (and then to Cu₂O) via release of the intact isocyanide, CO₂, and CO in a well-behaved thermal process around 200-280 °C.     

石墨炉原子吸收光谱法直接测定血样中硒

用石墨炉原子吸收光谱法，以硝酸铜和硝酸铵为基体改进剂，塞曼效应扣背景，采用标准加入法可直接测定血样中硒，回收率为95％～105％，相对标准偏差为5．8％，检出限为96pg，测定结果准确可靠。     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.