CONCEPTUAL DESIGN STUDIES OF AN 84 GHz, 500 kW, CW GYROTRON

The feasibility of an 84 GHz, 500 kW, CW gyrotron for ECRH on an experimental tokamak will be presented in this paper. Mode competition and mode selection procedures are carefully investigated by considering various candidate modes and the TE_10,4 mode is chosen as the operating mode. A conventional cylindrical cavity resonator with weak input and output tapers and parabolic roundings is considered for interaction studies. Self-consistent, both single mode and time-dependent, calculations are carried out and power and efficiencies are computed for a typical set of beam parameters. The results show that an output power of well over 500 kW, CW and efficiency around 40% can be reached without a depressed collector.     

水斗非定常自由水膜流三维贴体数值模拟

本研究采用水斗三维非正交贴体坐标系进行了非定常自由水膜流动的数值解析。对不规则水斗内表面采用三维非正交贴体坐标系下离散点进行拟合,推导了曲面离散点的法向矢量和曲面微元面高斯曲率、平均曲率等几何特征量的计算公式,进而导出流体粒子在运动方向上曲率计算式。在水斗三维贴体坐标系中,还推导了流体粒子在水斗曲面上的运动控制方程。最后对某水轮机水斗内表面非定常自由水膜流进行了数值模拟,得到其非定常水膜流态分布。     

Angle theorems for the Lagrangian mean curvature flow

We prove that symplectic maps between Riemann surfaces L, M of constant, nonpositive and equal curvature converge to minimal symplectic maps, if the Lagrangian angle for the corresponding Lagrangian submanifold in the cross product space satisfies . If one considers a 4-dimensional K?hler-Einstein manifold of nonpositive scalar curvature that admits two complex structures J, K which commute and assumes that is a compact oriented Lagrangian submanifold w.r.t. J such that the K?hler form w.r.t.K restricted to L is positive and , then L converges under the mean curvature flow to a minimal Lagrangian submanifold which is calibrated w.r.t. . Received: 11 April 2001 / Published online: 29 April 2002     

Al-pillared clays supported rare earths and palladium catalysts for deep oxidation of low concentration of benzene

Al-pillared clays supported rare earths (RE/Al-PILC) are prepared and used as supports of palladium catalysts for deep oxidation of low concentrations of benzene (130-160 ppm). The supports and catalysts are characterized by X-ray powder diffraction (XRD), FT-IR, BET, transmission electron microscopy (TEM) and temperature-programmed reduction (H₂-TPR). The results show that Al-pillaring results in a strong increase in the basal spacing (d_0 0 1) from about 1.2 to 1.8 nm, and an increase in the BET surface area from 63.6 (±3.2) to 238.8 (±11.9) m²/g. Activity tests of deep oxidation of low concentration benzene show catalysts supported on Al-PILC and RE/Al-PILC are obviously more active than that on raw clay. Pd/6% Ce/Al-PILC, in particular, can catalyze the complete oxidation of low concentration benzene at a temperature as low as about 290 °C.     

New ligands for the Fe(III)‐mediated reverse atom transfer radical polymerization of methyl methacrylate

A series of (di)picolinic acids and their derivates are investigated as novel complexing tridentate or bidentate ligands in the iron‐mediated reverse atom transfer radical polymerization of methyl methacrylate in N,N‐dimethylformamide at 100 °C with 2,2′‐azobisisobutyrontrile as an initiator. The polymerization rates and polydispersity indices (1.32–1.8) of the resulting polymers are dependent on the structures of the ligands employed. Different iron complexes may be involved in iron‐mediated reverse atom transfer radical polymerization, depending on the type of acid used. ¹H NMR spectroscopy has been used to study the structure of the resulting polymers. Chain‐extension reactions have been performed to further confirm the living nature of this catalytic system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2912–2921, 2006     

Surface structures formed by individual adsorption and coadsorption of Mn and Bi on Cu(0 0 1), studied by LEED

We have studied the individual adsorption of Mn and Bi, and their coadsorption on Cu(0 0 1) by low-energy electron diffraction (LEED). For Mn, we have determined the c(2 × 2) structure formed at 300 K, whose structure had been determined by several methods. We reconfirmed by a tensor LEED analysis that it is a substitutional structure and that a previously reported large corrugation (0.30 Å) between substitutional Mn and remaining surface Cu atoms coincides perfectly with the present value. In the individual adsorption of Bi, we have found a c(4 × 2) structure, which is formed by cooling below ∼250 K a surface prepared by Bi deposition of ∼0.25 ML coverage at 300 K where streaky half-order LEED spots appear. The c(4 × 2) structure has been determined by the tensor LEED analysis at 130 K and it is a substitutional structure. In the coadsorption, we found a c(6 × 4) structure, which has been determined by the tensor LEED analysis. It is very similar to the previously determined structure of the c(6 × 4) formed by coadsorption of Mg and Bi, and embedded MnBi₄ clusters are arranged in the top Cu layer instead of MgBi₄. Large lateral displacements of Bi atoms in the c(6 × 4)-(Mn + Bi) suggest that the Mn atoms undergo the size-enhancement caused by their large magnetic moment.     

On a conjecture of Cox and Katz

This note shows that a certain toric quotient of the quintic Calabi-Yau threefold in provides a counterexample to a recent conjecture of Cox and Katz concerning nef cones of toric hypersurfaces. Received: 8 February 2001; in final form: 17 September 2001 / Published online: 1 February 2002     

Systematic investigations of the multi-element preconcentration from copper by precipitation of the matrix as copper(I) oxide and copper(I) thiocyanate

Two methods for multi-element preconcentration from copper by reductive matrix precipitation are presented. In systematic investigations on the coprecipitation behaviour of Ag, Al, Au, Bi, Cd, Co, Cr, Fe, Ga, In, Mn, Mo, NJ, Pb, Sb, Se, Sn, Te and Zn during precipitation of the copper matrix as Cu₂O or CuSCN, the separation parameters were optimized. By combination with a hexamethyleneammonium hexamethylenedithiocarbamate collector precipitation, a concentration of 8 elements (Cu₂O precipitation) or 13 elements (CuSCN precipitation) in a small volume was achieved. The limits of detection of the procedures are, depending on the element, 0.1–5 μg g^?1 for flame atomic absorption spectrometry (AAS) and 0.01–0.1 μg g^?1 for graphite furnace AAS. The relative standard deviations are about 3%. The analytical performance of the procedures is compared with that of an electrolytic copper separation.     

A novel and efficient synthesis of porphine

meso-Tetra(n-hexyloxycarbonyl)porphyrin was found to be converted into porphine, the mother compound of porphyrins, in a 77% yield when heated in aqueous sulfuric acid at 180 °C over 30 min under an inert atmosphere. The observation demonstrates that the substituted porphyrin serves as a novel and useful precursor for porphine.     

Inequalities for the Moments and Distribution of the Ladder Height of a Random Walk

We obtain upper bounds for the tail distribution of the first nonnegative sum of a random walk and for the moments of the overshoot over an arbitrary nonnegative level if the expectation of jumps is positive and close to zero. In addition, we find an estimate for the expectation of the first ladder epoch.