Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.     

火焰原子吸收光谱法测定中药防风中铜、锰、锌和铁的不确定度评定

采用HNO3和HClO4消解防风样品,利用火焰原子吸收光谱法测定其中铜、锰、锌和铁含量.对测量过程中不确定度的产生原因进行了分析,并对防风中4种元素含量测定结果的不确定度进行了评定.     

142名健康成人血清铜的含量测定

本文用原子吸收法对吉林市１４２名健康成人血清铜的含量进行了测定。结果表明，男性血清铜值稍代于女性，但经统计学处理无显著性差异（Ｐ＞０．０５）。提出其正常值范围。     

2-(2-喹啉偶氮)-5-二甲氨基苯胺光度法测定铜

在pH=4.0的磷酸盐缓冲介质中,CTMAB存在下,2-(2-喹啉偶氮)-5-二甲氨基苯胺(QADMAA)与铜反应生成2:1稳定络合物,络合物λmax=580nm,ε=1.14×105L·mol-1·cm-1.铜含量在0.01-0.6μg/mL内符合比耳定律,方法用于环境样品中铜的测定,结果令人满意.     

激光烧蚀铜产生原子和离子光谱线的研究

通过测定Nd∶YAG脉冲激光烧蚀金属Cu诱导产生光谱线及其强度随时间与空间的分布,结果表明等离子体辐射光谱线由原子光谱线、离子光谱线及连续辐射背景光组成,Cu原子光谱线的数目不仅比离子光谱线多,而且辐射强度比离子光谱线的大,以连续辐射背景光的辐射强度为最弱;原子光谱线的发光范围最大,持续时间最长;离子光谱线发光范围中等,持续时间中长;连续辐射背景光的发光范围最小,持续时间最短.讨论了激光诱导发光的机理,认为等离子体羽中连续辐射背景光主要来自近靶处高能电子的韧致辐射和电子与离子的复合激发,原子和离子光谱线主要由等离子体中高能电子的碰撞传能激发所引起,并用之较好地解释了所观察的实验现象.     

Scanning infrared microscopy investigation of copper precipitation in cast multicrystalline silicon

The behavior of copper precipitation in cast multicrystalline silicon (mc-Si) annealed at different temperatures under air cooling (30 K/s) or slow cooling (0.3 K/s) was investigated by scanning infrared microscopy (SIRM). Comparing to Czochralski-grown silicon (Cz-Si), copper precipitated more easily in mc-Si, and the lowest temperature of copper precipitation in mc-Si was about 700 °C, lower than that in Cz-Si. It was also observed that copper preferably precipitated on grain boundaries so that near the grain boundaries the denuded zone formed. The results indicate that the defects including dislocations, grain boundaries and microdefects, as the heteronucleation sites, enhanced copper precipitation. Moreover, cooling rates had a great influence on the copper precipitation, especially at lower annealing temperatures. Generally air cooling led to the formation of high density of copper-precipitate colonies.     

牛磺酸Schiff碱及其Cu（Ⅱ）配合物的合成与表征

用牛磺酸与2-吡啶甲醛反应合成了一种牛磺酸Schiff碱,并制备了它与Cu（Ⅱ）的配合物[CuL（H2O）].NO3,其中HL=C8H10N2O3S,利用元素分析,红外光谱,紫外光谱,差热-热重分析及摩尔电导的测定等方法对Schiff碱及金属配合物进行了表征。     

Fabrication and surface characterization of biomimic superhydrophobic copper surface by solution-immersion and self-assembly

Biomimic superhydrophobic surfaces with contact angle greater than 150° and low sliding angle on copper substrate were fabricated by means of a facile solution immersion and surface self-assembly method. The scanning electron microscopy showed a nanoneedle structure copper surface with sporadic flower-like aggregates after treatment with sodium hydroxide and potassium persulfate solution. X-ray photoelectron spectroscopy and X-ray diffraction results confirmed that the formed nanoneedles were crystallized Cu(OH)₂. And the hydrophilic Cu(OH)₂ surface can be further modified into superhydrophobic through surface self-assembly with dodecanoic acid.     

Preparation and optical properties of soda-lime silicate glasses partially substituted by copper

The ion-exchange process was used to introduce copper ions into soda lime silicate glasses (SLS), the composition of which corresponds to the miscibility gape in the Na 2 O-SiO 2 system. The samples have been immersed either in a molten Cu 2 Cl 2 or CuCl 2 at various temperatures from the range 720-940 v K for different time. The observed green colour of glass is related with the 790-nm absorption band related to the cupric ions. The annealing either in air or in the hydrogen atmosphere was used for the reduction of copper. The effectiveness of these procedures was analysed on a basis of the penetration profiles monitored by roentgenographic methods (diffraction and EDAX). Transmission electron microscopy (TEM) observations of the replicated surface and common optical absorption measurements have been used to study the morphology of the dopant ions.     

Copper Defects and Conductivity in Bi—Pb—Sr—Ca—Cu—O Glasses

Glass ceramics of the composition (Bi_0.8Pb_0.2)₄Sr₃Ca₃Cu₄O₈ prepared by the melt quenching technique and the crystalline phases produced by the rapid thermal annealing have been studied by electrical resistivity and electron paramagnetic resonance (EPR) measurements in the temperature range from liquid helium up to room temperature. The concentration of the EPR active Cu^2? paramagnetic centers decreases as conductivity increases for the glass ceramics and disappears after crystallization and the growth of superconducting phases, similar to bulk high-T_c superconductors. The KPR spectra of both glass and crystallized ceramics after short-time annealing indicate the coexistence of Cu^2? paramagnetic ions and the exchange coupled clusters.