Structure and optical properties of nanostructured zinc oxide films with different growth temperatures

ZnO films were prepared by pulsed laser deposition (PLD) on glass substrate with temperature ranging from room temperature (RT) to 500 °C. All the films formed the hexagonal wurtzite structure and showed the c-axis (0 0 2) preferred orientation. The films deposited at 200 °C showed the narrowest full width at half maximum of both X-ray diffraction (XRD) and rocking curve, largest height grain size, smallest macrostress and least point defects. Meanwhile, it was found that the films deposited at 350 °C displayed the most intense diffraction peak in XRD and a strong UV emission while it showed the most intense defect-related green emission, fastest growth rate and larger macrostress. In addition, the cross section images showed all films grew with a columnar form along (0 0 2) orientation.     

Influence of polyethylene glycol-300 addition on nanostructured lead sulfide thin films properties

The concentration of polyethylene glycol-300 was found to play a crucial role in the formation of nanoparticles in PbS-chemical bath deposition process. We report here an endeavor to set up a relation between the variation of lead sulfide (PbS) nanocrystalline thin film properties, grown by (CBD) process at room temperature on corning glass and Si(100) substrates, with amount fluctuations of polyethylene glycol-300 in the solution. The transmittance of the films, for a fixed reaction time, increased up to ∼ 80% with the increase of % polyethylene glycol-300 in the solution, indicating the formation of very thin films due to the decrease of reaction rate with the increase of the concentration of polyethylene glycol-300. The optical band gaps were found to strongly rely on the composition of the bath deposition and increase with the increase of the polyethylene glycol-300 amount in the solution. Particle sizes between 2.8 and 8.7 nm were obtained by varying the % of polyethylene glycol-300 from 0.2 to 1.5. The concentration of polyethylene glycol-300 not only affects the reaction rate but also the morphology of the obtained films. PbS nanoparticles were found to be oriented preferentially along the < 200> plane. The absorption shifts towards short wavelength indicating a blue-shifting as a consequence of quantum confinement.     

Rh-B doped polymeric optical waveguide for integrated optics

A systematic study of fabrication and characterization of rhodamine-blue (Rh-B) doped polystyrene waveguide is presented. Optical absorption and mode effective refractive index measurement was performed on the waveguides fabricated on glass substrate prepared by dip coating technique. It is observed that doping of dye increase the index of refraction of waveguides. The losses, however, decrease initially for dye concentration upto 0.1% and thereafter increase rapidly.     

Effects of annealing on properties of ZnO thin films prepared by electrochemical deposition in chloride medium

The development of cost-effective and low-temperature synthesis techniques for the growth of high-quality zinc oxide thin films is paramount for fabrication of ZnO-based optoelectronic devices, especially ultraviolet (UV)-light-emitting diodes, lasers and detectors. We demonstrate that the properties, especially UV emission, observed at room temperature, of electrodeposited ZnO thin films from chloride medium (at 70 °C) on fluor-doped tin oxide (FTO) substrates is strongly influenced by the post-growth thermal annealing treatments. X-ray diffraction (XRD) measurements show that the films have preferably grown along (0 0 2) direction. Thermal annealing in the temperature range of 150-400 °C in air has been carried out for these ZnO thin films. The as-grown films contain chlorine which is partially removed after annealing at 400 °C. Morphological changes upon annealing are discussed in the light of compositional changes observed in the ZnO crystals that constitute the film. The optical quality of ZnO thin films was improved after post-deposition thermal treatment at 150 °C and 400 °C in our experiments due to the reducing of defects levels and of chlorine content. The transmission and absorption spectra become steeper and the optical bandgap red shifted to the single-crystal value. These findings demonstrate that electrodeposition have potential for the growth of high-quality ZnO thin films with reduced defects for device applications.     

Surface structure of Langmuir-Blodgett films of lipophilic guanosine derivatives

We studied surface organization of lipophilic guanosine derivatives with one, two and three alkanoyl tails in thin films on water surface and in Langmuir-Blodgett (LB) films transferred onto freshly cleaved mica substrate. The derivative with one alkanoyl group exhibits irreversible pressure-area isotherms and ribbon-like LB film structures. The derivatives with two and three side groups show reversible isotherms with similar critical surface pressures, while their LB film structures are quite different. The derivative with two tails forms films with flat terraces of micrometer size, while the derivative with three tails exhibits irregular thread-shaped assemblies. These observations demonstrate that molecular assembly of LB films of guanosine derivatives can be effectively manipulated by altering the number of attached lipophilic groups.     

Characteristics of electron beam evaporated nanocrystalline SnO2 thin films annealed in air

Tin oxide (SnO₂) thin films (about 200 nm thick) have been deposited by electron beam evaporation followed by annealing in air at 350-550 °C for two hours. Optical, electrical and structural properties were studied as a function of annealing temperature. The as-deposited film is amorphous, while all other annealed films are crystalline (having tetragonal structure). XRD suggest that the films are composed of nanoparticles of 5-10 nm. Raman analysis and optical measurements suggest quantum confinement effects that are enhanced with annealing temperature. For instance, Raman peaks of the as-deposited films are blue-shifted as compared to those for bulk SnO₂. Blue shift becomes more pronounced with annealing temperature. Optical band gap energy of amorphous SnO₂ film is 3.61 eV, which increases to about 4.22 eV after crystallization. Two orders of magnitude decrease in resistivity is observed after annealing at 350-400 °C due to structural ordering and crystallization. The resistivity, however, increases slightly with annealing temperature above 400 °C, possibly due to improvement in stoichiometry and associated decrease in charge carrier density.     

Electron beam evaporated LaF3 thin films prepared by different temperatures and deposition rates

LaF₃ thin films were prepared by electron beam evaporation with different temperatures and deposition rates. Microstructure properties including crystalline structure and surface roughness were investigated by X-ray diffraction (XRD) and optical profilograph. X-ray photoelectron spectroscopy (XPS) was employed to study the chemical composition of the films. Optical properties (transmittance and refractive index) and laser induce damage threshold (LIDT) at 355 nm of the films were also characterized. The effects of deposition rate and substrate temperature on microstructure, optical properties and LIDT of LaF₃ thin films were discussed, respectively.     

Reactive Pulsed Laser Deposition of titanium nitride thin film: Optimization of process parameters using Secondary Ion Mass Spectrometry

Reactive Pulsed Laser Deposition is a single step process wherein the ablated elemental metal reacts with a low pressure ambient gas to form a compound. We report here a Secondary Ion Mass Spectrometry based analytical methodology to conduct minimum number of experiments to arrive at optimal process parameters to obtain high quality TiN thin film. Quality of these films was confirmed by electron microscopic analysis. This methodology can be extended for optimization of other process parameters and materials.     

Optical, structural and adsorption properties of zinc peroxide/hydrogel nanohybrid films

Hybrid nanofilms from zinc-peroxide/poly(acrylamide) (ZnO₂/PAAm) and zinc-peroxide/poly(N-isopropyl-acrylamide) (ZnO₂/PNIPAAm) were prepared using the photopolymerization procedure. The thin layers were prepared by the combination of the Layer-by-Layer (LbL) self-assembly method and photopolymerization using UV light in every step of the procedure. The hybrid multilayer films consisting of layers of zinc peroxide nanoparticles and hydrogel alternating in a sandwich-like fashion with thicknesses of 65-246 nm. The chemical structures of the hybrid films were investigated by FTIR spectroscopy, their morphology was studied by atomic force microscopy (AFM). The build up of the films was studied by measuring the optical reflection spectrum, and we have calculated the refractive index and layer thickness of the hybrid layers using simulating software. The adsorption properties of the ZnO₂/hydrogel nanohybrid composite networks were investigated by measuring water and ethanol vapour adsorption by a quartz crystal microbalance (QCM). It was established that on partially hydrophobic ZnO₂/PNIPAAm hybrids the adsorbed amounts were lower, against the hydrophilic ZnO₂/PAAm film the vapour amount was higher. These results correspond to those of the bulk gel swelling results.     

Structure evolution and stoichiometry control of Pb(Zr, Ti)O3 thick films fabricated by electrospray assisted vapour deposition

Well-crystallized and stoichiometric Pb(Zr, Ti)O₃ (PZT) films, typically ∼5 μm thick, with pure perovskite-type rhombohedral structures have been successfully prepared via an electrospray assisted vapour deposition (ESAVD) method. Control of the deposition temperature within a narrow range of 300-400 °C resulted in films with the most desirable phases. PZT films with close stoichiometric match with the expected composition ratio and uniform element distribution were obtained by adding the appropriate levels of excess Pb in the precursor solutions. The annealed films were uniform, dense, compact and adherent to the substrates. The dielectric constant, ?_r, and loss tangent, tan δ, of the fabricated PZT films measured at 10 kHz were 442 and 0.09, respectively. The ESAVD deposited PZT films showed a remanent polarization, P_r, of 15.3 μC/cm² and coercive field, E_c, of 86.7 kV/cm. These results demonstrate the clear potential of the ESAVD method as a promising technique for the fabrication of thick PZT films.