环氧树脂与氰酸酯共固化产物性能的研究

环氧树脂是一类综合性能优良并获广泛应用的热固性树脂基体 .但是通常的环氧树脂基体中含有大量反应生成的羟基等极性基团 ,吸湿率高 ,使其复合材料在湿热环境下力学性能和介电性能显著下降 .应用氰酸酯改性固化的环氧树脂等热固性树脂 ,将赋予以其为基体的复合材料以优异的耐热性能、力学性能和介电性能[1 ,2 ] .这类复合材料的研究开发对特种电子电气绝缘材料和先进复合材料的发展具有重要意义 .作者曾应用ＦＴ ＩＲ、ＤＳＣ等分析技术对氰酸酯与环氧树脂 (氰酸酯在欠量、适量和过量条件下 )的共固化反应机理和固化物结构特征等进行过深入…     

Copolymerization of styrene and reactive surfactants in a microemulsion: control of copolymer composition by addition of nonreactive surfactant

The γ-ray-induced copolymerization of styrene and the surfactant monomer (surfmer) (11-acryloyloxy)undecyltrimethylammonium bromide, 1, – with and without the presence of the nonreactive surfactant N-dodecyltrimethyammonium bromide, 2, – was studied in a single-phase (1Φ) oil-in-water microemulsion. Upon exchange of 50 weight percent of 1 against 2 the 1Φ region could be increased to higher styrene content. Upon γ-ray irradiation a copolymer is formed: this copolymer exhibits a larger styrene-to-surfmer ratio than the original monomer mixture. This allowed the styrene-to-surfmer molar ratio in the resulting polymer to be varied from 0:1 to 4.3:1. The larger styrene-to-surfmer ratio originates from the simultaneous formation of homopolymer P-1, which is in accordance with the Candau–Leong–Fitch model of polymerization. Further information on particle size and material properties of the copolymers, which is not accessible by other preparation methods, is also given. Received: 30 July 1999 /Accepted: 24 November 1999     

新型高效催化剂乙烯/1-丁烯气相齐聚和共聚制备弹性体及其结构与性能关系

用新型催化体系TiCl₄,Ti(OBu)₄/MgCl₂,SiO₂和ZnCl₂/醇/AlR₃催化乙烯与1-丁烯气相均聚及共聚,制得两种共聚物弹性体,发现新型催化剂体系具有独特的齐聚和原位共聚性能.采用¹³CNMR测定了共聚物链序列分布结构,观察到共聚单体在聚合物链中分布不均匀,存在较长的乙烯链段和较多的1-丁烯嵌段.产物DSC谱图表现出复杂的结晶熔融行为,存在多种结晶形态,出现熔融肩峰及双峰,与通常制得的LLDPE的结晶熔融行为有很大差别;结晶度和密度较低,并具有弹性体性质.     

ansa-Metallocene (R-Ph)2C(Cp)(Ind)MCl2 with electron withdrawing substituents on phenyl groups for olefin polymerization

The new ansa-complexes (R-Ph)₂C(Cp)(Ind)MCl₂ (R = CF₃, F, Cl; M = Ti, Zr or Hf) were synthesized from the reaction of dilithium salt of the corresponding ligands with appropriate group 4 metal halides. They were tested for ethylene homopolymerization and copolymerization in the presence of methylaluminoxane (MAO) at various ethylene pressures and temperatures. In the case of zirconocenes, complexes 2 (R = CF₃) and 8 (R = Cl) demonstrated much higher catalytic activity than complexes 10 (Ph₂C(Cp)(Ind)ZrCl₂) and 5 (R = F) in ethylene polymerization. The same trend was observed in titanocenes and hafnocenes. The electronic and geometric effects of substituents at the phenyl group on the polymerization activity were easily noticed. For the ethylene/1-hexene or 1-octene copolymerization, 2 also showed the highest catalytic activity, and the copolymers from complex 8 possessed the highest 1-hexene and 1-octene contents.     

二氧化碳和环氧丙烷共聚用的双金属催化体系

锌盐、三乙基铝、含活泼氢化合物三组份体系可以催化二氧化碳与环氧丙烷共聚,生成聚丙撑碳酸酯.实验发现,高分子羧酸是比水更好的助催化剂.体系的催化活性依赖于其中锌盐和聚合物载体的种类、体系各组份的摩尔比以及混合次序,说明反应中两种金属存在某种协同作用。本文提出了催化活性中心可能的结构.     

Kinetics of copolymerization and degradation of poly[acrylonitrile-co-(amino ethyl-2-methyl propenoate)]

Amino ethyl-2-methyl propenoate was firstly used to successfully copolymerize with acrylonitrile in a H₂O/dimethylsulfoxide (DMSO) mixture between 50 °C and 70 °C under N₂ atmosphere. This was achieved by using azobisisobutyronitrile as the initiator. Kinetics of copolymerization of acrylonitrile with amino ethyl-2-methyl propenoate was investigated. The kinetic equation of copolymerization was obtained and the apparent activation energy of degradation of poly[acrylonitrile-co-(amino ethyl-2-methyl propenoate)] was determined. Increasing DMSO concentration in the solvent mixture leads to a rapid increase in the degradation apparent activation energy. The apparent activation energy decreases quickly with an increase in the comononer amino ethyl-2-methyl propenoate concentration, and such a change becomes less prominent as the molar ratio of amino ethyl-2-methyl propenoate/acrylonitrile goes beyond 2/100. The apparent activation energy also increases along with the copolymerization temperature. The resultant fibers prepared from poly[acrylonitrile-co-(amino ethyl-2-methyl propenoate)] were obtained with the fineness at 1.03 dtex and the tenacity at 6.18cN dtex⁻¹.     

A novel route to the synthesis of PP-g-PMMA copolymer via ATRP reaction initiated by Si-Cl bond

The copolymerization of propylene with allyldimethylsilane (ADMS) was carried out with conventional Ziegler-Natta catalyst supported on MgCl₂. The effects of the concentration of ADMS in the feed on the polymerization reaction and copolymer properties were investigated. The resulting copolymer PP-co-ADMS was chlorinated to PP-Si-Cl by refluxing the copolymer with SOCl₂ in benzene. The chlorinated copolymer was used to initiate ATRP of MMA with CuCl/PMDETA as catalyst to produce graft copolymer PP-g-PMMA, which was characterized with ¹H NMR, ¹³C NMR, GPC and DSC. Polymer blend of iPP/PP-g-PMMA/PMMA was prepared and the results shown that PP-g-PMMA was an effective compatilizer.     

反丁烯二酸酯的自由基共聚反应

<正> 对反丁烯二酸酯(DRPs)类单休的均实反应研究已有许多报道。研究结果表明,所有的正烷基酯基DRFs单体,如反丁烯二酸二王丙酯等,均表现出很低的聚合反应活性,因而得不到高分子量的均聚物;而某些非正烷基酯的DRFs单体,如反丁烯二酸二异丙酯则显示出很高的聚合反应活性并可形成高分子量的聚合物。对反丁烯二酸酯同其他乙烯类单体(如苯乙烯等)的共聚研究曾有一些报道,但对DRFs单体之间的共聚     

温度对4-甲基丙烯酸2,2,6,6-四甲基哌啶醇酯与苯乙烯自由基共聚活性的影响

本文研究了4-甲基丙烯酸2,2,6,6-四甲基哌啶醇酯和苯乙烯在不同温度下的自由基共聚合反应。发现在石油醚、苯和二甲基甲酰胺等溶剂中,反应温度对共聚活性的影响不同。用NMR法测定了单体与溶剂的络合常数;计算了单体与溶剂相互作用的活化能和活化熵,依此对共聚活性与温度之间的关系进行了讨论。     

THE MECHANISM OF COPOLYMERIZATION OF VINYL AND DIVINYL MONOMER Ⅵ: A STUDY ON THE MECHANISM OF THE STRUCTURE FORMATION OF CROSSLINKED POLYSTYRENE

In order to study the mechanism of the formation of maeroporous copolymer, the overall reaction kinetics, phase separation and gelation of the S/EGDM in the presence of inert solvents and the physical properties of the eopolymer were investigated and compared with the corresponding system of S/DVB and S/DVB/MMA. The formation of the network structure of the macroreticular polymer was studied and a model of the mechanism suggested.