Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

PEG-PLA嵌段共聚物的合成及~(13)C NMR对平均链段长度的测定

本文报道聚乙二醇(PEG)在辛酸亚锡存在下与丙交酯(LA)反应合成PEG-PLA嵌段共聚物,用~(13)C NMR测定了共聚物的结构,估算了平均链段长度.实验结果表明,L_(PEG)在反应过程中保持不变,而L_(PLA)随反应时间和LA在原料配比中含量的增加而增加,呈逐步聚合反应特点.对聚合反应机理作了推测.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Comparison of the thermal behavior of three cellulose fibers mercerized or submitted to solar degradation

Comparison of Lyocell, modal and viscose fibers was performed by means of differential scanning calorimetry, thermogravimetry and scanning electron microscopy. Thermal analysis was performed in air atmosphere. Samples were mercerized (21.3 g 100 mL-1) or submitted to solar radiation (seven months). Solar degraded samples presents a higher thermal stability and are initially less degraded. Furthermore, Lyocell fiber is the most stable under thermal degradation conditions. Heating produces a reduction of the fiber diameter (about 50%). This revised version was published online in July 2006 with corrections to the Cover Date.     

1,2-二乙炔基四苯基乙硅烷与1,2-二乙炔基四甲基乙硅烷的共聚及其光解

1,2-二乙炔基四苯基乙硅烷与1,2-二乙炔基四甲基乙硅烷在催化剂铑(Ⅰ)络合物[氯化三-(三苯基膦)铑]的作用下得到一种新的含硅共聚物。实验证明此共聚物的主链是有规交替结构。研究了固体薄膜及其溶液的光解作用,并测定了SbF_5蒸气处理后的共聚物薄膜的导电性。     

聚碳硅烷／纳米镍粉的热裂解

聚碳硅烷／纳米镍粉的热裂解王军＊宋永才冯春祥（国防科学技术大学材料工程与应用化学系长沙４１００７３）关键词聚碳硅烷，纳米材料，镍，热解，碳化硅纤维１９９６－０９－１７收稿，１９９６－１２－１３修回国家攻关计划和“８６３”高技术资助项目聚碳硅烷（ＰＣＳ...     

K~+-FREE INDUCED EARLY AFTERDEPOL-ARIZATION IN CARDIAC VENTRICULAR FIBERS OF GUINEA PIG AFTER COLD TREATMENT

The genesis and elimination of early afterdepolarizations (EADs) have been investigated in guinea pig cardiac ventricular fibers after a short period of cooling (5h, 2—4℃). After rewarming them to 37℃, EADs could be induced by K~+-free superfusion at an appropriate driving stimulation (0.2 Hz) in all preparations. A high level plateau, which linearly increases its duration with time, appears ahead of EADs. The critical point of the plateau occurred steadily at the level of -47±4 mV. Two types of triggered activity, all of which are the rhythmic activities in low level of membrane potential (-50 to -60 mV), appear on the platcau. There is no significant change after overdriving. Agonists of the Na-K pump (K~+ and Tl~+) could stop the rhythmic activity immediately and turn the low level of membrane potential to high one. The results showed that high level plateau is the basis of genesis of EADs, and the activation of Na-K pump plays an important part in stopping triggered rhythms arising from EADs.     

Synthesis of novel copoly(styrene-maleic anhydride) materials and their luminescent properties

Two series of new high fluorescent polymeric materials based on copoly(styrene-maleic anhydride) (SMA) were prepared by the condensation of SMA with fluorescent groups. One series consists of 1,8-naphthalimides derivatives that are linked with SMA. The other series were prepared by the condensation of SMA with 3,4,9,10-perylene tetracarboxylic mono-anhydride mono-imide. These simple routes to copolymer of styrene and maleic anhydride containing pendent luminescent moiety are promising in increasing fluorescent quantum yield in solid state and processing, in which styrene is employed as “diluents”. The luminescent and the preliminary photovoltaic properties of these copolymers have been investigated.     

Applications of chalcogenide glass optical fibers

Chalcogenide-glass fibers based on sulfide, selenide, telluride and their rare-earth-doped compositions are being actively pursued worldwide. Great strides have been made in reducing optical losses using improved chemical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, chalcogenide-glass fibers are enabling numerous applications that include laser power delivery, chemical sensing, and imaging, scanning near field microscopy/spectroscopy, IR sources/lasers, amplifiers and optical switches.     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.