SYNTHESIS OF MACROMONOMER USING END FUNCTIONAL POLYSTYRENE PREPARED FROM p-METHOXYBENZYL p-TRIMETHYL-SILYLPHENYL SELENIDE AS A PHOTOINIFERTER

The end functional polystyrene having phenylseleno group at ω-chain end was prepared from radical polymerization of styrene in the presence of p-methoxybenzyl p-trimethylsilylphenyl selenide as a photoiniferter. The phenylseleno group at ω-chain end in polystyrene was eliminated by hydrogen peroxide. The resulting polystyrene was interconverted quantitatively to polystyrene having epoxy end group by the oxidation with m-chloroperbenzoic acid. The macromonomer having a meth-acryloyl end group was synthesized from polystyrene containing epoxy end group with methacrylic acid in xylene at 140°C. Copolymerization of this macromonomer with methyl methacrylate afforded effectively a graft copolymer composed of a poly-(methyl methacrylate) backbone and polystyrene branches.     

Prediction of High Performance Fibers Strength Using Back Propagation Neural Network

Nowadays, quantification of the effects of basic parameters such as precursor, temperature oxidation, residence time, low temperature carbonization (LTC) and high temperature carbonization (HTC) on production process polyacrylonitrile based carbon fibers is not completely understood. In this way, there is not a completely theoretical model that accomplishes to quantitatively describe production process carbon fibers very accurately which needs to be used by engineers in design, simulation and operation of that process. This paper presents the development of a back propagation neural network model for the prediction of carbon fibers produced from PAN fibers. The model is based on experimental data. The precursors, temperature oxidation, residence time, LTC and HTC have been considered as the input parameters and the strength as output parameter to develop the model. The developed model is then compared with experimental results and it is found that the results obtained from the neural network model are accurate in predicting the strength of carbon fibers.     

Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.     

Novel Copolymer of Diisopropyl Fumarate and Benzyl Acrylate Synthesized Under Microwave Energy and Quasielastic Light Scattering Measurements

Microwave assisted free radical copolymerization of diisopropyl fumarate (DIPF) and benzyl acrylate (BzA) with different copolymer compositions was performed using benzoyl peroxide as initiator. The effect of the reaction conditions on the macromolecular characteristics, monomer reactivity ratio and copolymer properties were studied. The monomer conversion and average molecular weights increase with the content of BzA units in the copolymer. The copolymers were characterized by IR, ¹H and ¹³C-NMR spectroscopies and the molecular weights were analyzed with size exclusion chromatography (SEC). The reactivity ratios obtained from an extended Kelen-Tüdös method under microwave irradiations are a factor which is double than those obtained by thermal copolymerization. The product r₁r₂ = 0.152 suggests a preference of both propagating macroradicals toward consecutive homopolymerization. The hydrodynamic and polydispersity size were measured in ethylacetate, tetrahydrofuran and methylethylketone with a quasi-elastic light scattering (QELS) technique showing that the quality of the solvents increases in the order: EA < THF < MEK.     

硫酸铜掺杂TiO2涂层对碳纤维抗氧化性能的影响

采用溶胶-浸渍法,以CuSO₄为烧结助剂在碳纤维表面制得TiO₂涂层。利用XRD、SEM和TEM分析了涂层相组成及形貌,通过静态等温氧化实验考察了涂层碳纤维抗氧化性能。结果表明：掺杂CuSO₄制备TiO₂涂层均匀完整致密,涂层相组成均为锐钛矿型TiO₂,且涂层厚度从45 nm提高至185 nm;与普通TiO₂涂层碳纤维相比,完全氧化温度从667 ℃上升到800 ℃,氧化活化能从118.390 kJ·mol^-1提高到152.562 kJ·mol^-1,CuSO₄的掺杂大大提高了TiO₂涂层碳纤维的抗氧化性能。     

Novel Methods for Obtaining High Modulus Aliphatic Polyamide Fibers

Super high modulus polyethylene fibers can be created by converting high molecular weight flexible PE chains into highly oriented and extended chain conformations. However, unlike polyethylene, aliphatic polyamides have very high cohesive energy and therefore cannot be easily drawn and highly oriented. This review addresses this fundamental problem by analyzing various novel approaches that can be used to suppress hydrogen bonding in these types of polyamides. Plasticization of such polymers with ammonia, iodine, salts, and Lewis acids, as well as dry spinning, wet spinning, and gel spinning, are discussed. Specialized techniques that involve vibrational zone drawing and annealing as well as laser heating zone drawing and annealing are also reviewed. Some of these methods definitely lead to remarkable improvements in initial modulus and other mechanical properties. The development of recombinant spider silk proteins as well progress in spinning these materials is also reported. The advantages and disadvantages of all of these processes are then summarized.     

Microstructural evolution during oxidative ablation in air for polyacrylonitrile based carbon fibers with different graphite degrees

Polyacrylonitrile‐based carbon fibers with different graphite degrees were oxidative ablated at 500 and 600 °C in air. By Thermal gravimetric (TG), Raman spectroscopy, X‐ray diffraction, and SEM, the mass loss, microstructure, and surface morphology of carbon fibers were investigated. The mass loss of carbon fiber increases linearly with increasing oxidative ablated time under 500 and 600 °C. The carbon fiber with higher graphite degree shows higher oxidative resistance, and the surface roughness increases gradually because of chemical ablation during the whole oxidation. A gloss morphology appears on the surface primarily because of physical denudation for carbon fibers with lower graphite degree and then burn off according to carbon and oxygen reaction. The crystallite size (La) decreases significantly, while interlayer spacing(d₀₀₂) remains nearly unchanged. SEM observation suggests the two kinds of ablation mechanisms for carbon fibers with different graphite degrees indicating that CC band in sp³ hybridization prefers to be attacked by oxygen molecule more than that in sp² hybridization during oxidation ablation in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Polymers-Copolymer as Flow Improvers for Fuel Oils and Their Electrical Conductivity

In order to find efficient cold flow improvers for fuel oil, polymethylmethacrylate (PMMA), polystyrene (PS), and a copolymer [styrene (S)–methylmethacrylate (MMA) were prepared. The structure of these polymers and the copolymer were characterized by infrared spectral analysis and their molecular weights were measured. These polymers-copolymer were used as additives for fuel oils in order to lower their pour point. Accordingly, they were evaluated as flow improvers for fuel oil. The results indicated that PMMA possesses less performance as pour point depressant. While the addition of PS and the copolymer (S–MMA) yield excellent pour point depressants for fuel oil. Upon studying the prepared additives and their properties, it was found that the electrical properties of the copolymer were changed due to the presence of polar ion in MMA effect on the electrical properties. The highest electrical conductivity was found when styrene:MMA molar ratio was 1:1.     

Electrospun Nickel Oxide Hollow Nanostructured Fibers

The citric acid/nickel acetate composite hollow fibers were prepared by using sol-gel processing and co-electrospinning technique. The polycrystalline NiO hollow nanostructured fibers were prepared after calcination. The obtained hollow nanostructured fibers made up of 17～25 nm nanocrystals were about 150 nm to several micrometers in outer diameter. The hollow NiO nanostructured fibers have been characterized by TG, DSC, SEM, FTIR, and XRD techniques. The results showed that the morphology of NiO hollow fibers was obviously influenced by the calcination temperature.     

二氧化碳基脂肪族聚碳酸酯的功能化研究进展

简要介绍了二氧化碳基塑料的工业化进程,同时针对当前二氧化碳共聚物结构中缺少可反应基团、难以进行化学修饰导致的品种和功能单一、亲水性差等问题,介绍了二氧化碳基脂肪族聚碳酸酯的功能化研究进展,主要包括侧链含有双键、碳酸酯键和液晶基团的侧基功能化二氧化碳共聚物的合成与性能研究,以及二氧化碳共聚物的亲水性调制和刺激响应行为探索,试图为丰富二氧化碳基聚碳酸酯结构和性能提供借鉴.