目标因子分光光度法同时测定中成药复方五味子中三项活性成分

将目标因子分光光度法应用于五味子提取液中五味子甲素、五味子乙素、五味子醇甲等三项活性成分的同时测定,介绍了基本原理和具体的分析步骤,运用计算机VC 语言对试验数据进行回归分析。试验结果表明,目标因子分光光度法对样品各组分的平均回收率在98.9%-106.7%之间,样品不经分离即可同时测定。     

壳聚糖-聚羟基丁酸酯共混膜的制备与性质

以乙酸为共溶剂,制备了壳聚糖-聚羟基丁酸酯(CTS-PHB)共混膜,利用红外光谱(FT-IR)、广角X粉末衍射(WAXD)、扫描电镜(SEM)及差热分析(DTA)表征了共混膜的化学组成、晶形、形貌和热稳定性能。研究表明:CTS和PHB可在体积百分数为62.5%的乙酸溶液中共混,形成表面光滑、不透明的膜,干态共混膜具备一定的力学强度。各比例的CTS-PHB共混膜有相同的热分解温度,共混膜的形貌特征随两组分质量配比变化,其中mPHB/mCTS=1/1的共混膜显示出良好的有序结构。     

白酒中C_9－C_（18）脂肪酸的气相色谱分析

白酒中Ｃ＿９－Ｃ＿（１８）脂肪酸的气相色谱分析周在德，曾永昌（四川大学化学系成都６１００６４）关键词气相色谱法，白酒，Ｃ＿９－Ｃ＿（１８）脂肪酸。白酒中脂肪酸的含量及相互比例关系，极大地影响着白酒的色，香，味，风格￣（［１］［２］）。一般采用的化学分...     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

Adsorption of poly(ethylene glycol)s on mercury/aqueous solution interface 1. Kinetics of PEG 8000 adsorption

In order to study the influence of the adsorption of fulvic compounds on voltammetric signals and to understand better the adsorption of these compounds on hydrophobic natural water interfaces, adsorption studies of macromolecules such as poly(ethylene glycol) (HO(CH₂CH₂O)_n) with molecular weight of 8000 were done on the mercury/water interface by a.c. voltammetry at the potential of zero charge. The maximum surface concentration, adsorption equilibrium constant and adsorption rate constant have been determined from the global adsorption mechanism, controlled by two determining steps: diffusion and kinetics of adsorption at the interface.     

铁基超细粒子催化剂结构与还原行为的Mssbauer谱研究

铁基超细粒子催化剂具有优良的F-T反应性能。本工作利用原位Mssbauer谱辅以XRD技术研究了含有钾助剂的F-T合成铁基超细粒子催化剂的结构与还原行为,考察了催化剂组成和第二金属组分(Mn,Zn,Mg)的影响。“纯”铁超细粒子催化剂在氢气中很容易经Fe_3O_4还原为零价铁。第二金属组分的引入,一方面阻碍了催化剂的还原,另一方面稳定了Fe~(2+)的存在而使其成为还原的主要中间相,这有利于反应条件下形成类尖晶石结构的活性相。对于Fe-Mn催化剂,上述效应随锰含量的增加而更趋显著。铁基超细粒子催化剂在氢气中的还原能力依“纯”Fe>Fe-Zn>Fe-Mn>Fe-Mg的顺序递减,这在一定程度上反映了铁与第二金属组分之间相互作用的强弱。     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。