Intercalation assembly of kojic acid into Zn-Ti layered double hydroxide with antibacterial and whitening performances

The inhibitor of melanin and the bacteriostatic agent kojic acid was inserted into Zn-Ti layered double hydroxide (LDH) by anion-exchange reaction. The structure, slow release, antibacterial and skin whitening activity were studied.     

主链含膦酸酯的聚酸酐药物控制释放材料研究

通过二氯膦甲（乙）酸乙酯与对羟乙氧基苯甲酸反应，制备了二羧苯氧乙氧基膦甲（乙）酸乙酯，并其转化成混合醋酐并通过熔融缩聚，合成了主链含膦甲（乙）酸乙酯的聚酸酐，以二羧苯氧乙氧基膦甲（乙）酸乙酯，分别与１，３－双（４－羧基苯氧基）丙烷（ＣＰＰ）及癸二酸（ＳＡ）共聚，得到相应的共聚酸酐，对所合成的单体和聚合物的结构进行了表征，研究了它们的体外降解，酶促降解及其对抗肿瘤药物５－氟尿嘧啶和氨甲喋蛉的释放性能     

配糖蛋白B—阳离子丙烯酸树脂微胶囊的性能研究

本文研究了配糖蛋白B-阳离子丙烯酸树脂微胶囊的形态、粒径及粒径分布,并在模拟胃液的酸性缓冲液中进行了微胶囊的溶解释放试验。结果表明该微胶囊能溶于人体的胃液中,可配制适合儿童口服的混悬剂。     

Polyelectrolyte capsules made of two biocompatible natural polymers

In this study the influence of the experimental conditions on the obtention of polyelectrolyte multilayer capsules was investigated. Two ways of the simple coacervation method was used to obtain spherical capsules involving chitosan and hyaluronan, chitosan being inside the particle covered by a hyaluronan layer to increase the biocompatibility. The ¹H-NMR spectroscopy confirmed a polyelectrolyte complex formation and the optical microscopy shows that the complexed capsules have good sphericity with average diameters ranging from 590 at 1550 μm in the experimental conditions adopted. One can observe that in the acid medium the complexed capsules are much stable than the chitosan beads. The structures described provide a starting point for the design and fabrication of complexed capsules made of two biocompatible natural polymers with potential applicability in medical or pharmaceutical applications. Few diffusion experiments demonstrated that the complexed layer controls the diffusion of dextran included in the chitosan inner domain.     

Polymer dispersions from catalytic polymerization in aqueous systems

By contrast to traditional free radical emulsion polymerization, catalytic polymerization allows for polymer microstructure control. In terms of polymerizable monomers, both techniques are largely complementary. Since the beginning of this decade, an increasing number of reports on polyolefin, polybutadiene, polyalkenamer, polynorbornene, polyketone, and polyacetylene dispersions prepared by catalytic polymerization in disperse aqueous systems has appeared. This contribution reviews the preparation of these dispersions, their colloidal properties, particle formation mechanisms, particle morphologies, and polymer microstructures.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

响应性凝胶及其在药物控释上的应用

综述近年来在响应性凝胶材料研究方面的进展，介绍了能感应ｐＨ、温度、光、电场以及生化物质等外界因素变化的响应性凝胶的结构特点与响应机理，同时介绍了此类凝胶应用于药物控制释放方面的研究近况。