表征固体超强酸性的新方法--正丁烷异构化反应的原位13C MAS NMR谱

室温下SO2 -4/ZrO2 催化剂 (SZ)上13 C标记的正丁烷异构化反应的原位13 CMASNMR谱研究结果表明 :其反应动力学符合Langmuir Hinshelwood一级可逆表面反应动力学公式 ,由该动力学公式计算得到的反应速率常数可以用于衡量固体催化剂的表面超强酸性 .这种新的表征方法显示采用一步 -醇热 -超临界干燥综合技术合成的SZ催化剂不仅比表面和硫酸根含量高 ,而且其超强酸性和异构化反应活性均明显优于常规法合成的催化剂 ,具有良好的应用前景 .     

配位聚合物{[CoL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成、波谱表征和磁学性质

A new Schiff base complex， CoL(ClO₄)·3H₂O (1) {L represents condensed from equal molar ratio of sali-cylaldehyde and diethylenetriamine} was synthesized and characterized. Further， a new coordination polymer， {[CoL][Fe^ⅡFe^Ⅲ(ox)₃·1.5H₂O]}_∞ (2)， was synthesized and characterized， where ox^2-=oxalate. The results of the IR and M?ssbauer spectra of 2 revealed that the coordination polymer exists 2-D layer structure in the solid state， and anions layer was formed by [^ⅡFe^Ⅲ(ox)₃]^- unit. The magnetic properties of 2 have been measured and the results indicate that there is magnetic ordering in the low temperature， which may arise from intermolecular ferromagnetic interactions or spin canted effects.     

配位聚合物{[MnL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成及其磁学性质

合成和表征了一种新的Schiff碱配合物MnL(ClO4)*3H2O(1)(其中L为n(水杨醛)∶n(二乙撑三胺)=1∶1缩合而成的Schiff碱).1与FeSO4*7H2O和K3[Fe(ox)3]*3H2O(ox=oxalate)进一步反应,生成了双金属层状配位聚合物{[MnL][FeⅡFeⅢ(ox)3]*1.5H2O}∞(2).IR和Mssbauer谱测定结果表明,2具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.变温磁化率(5K～100K)测试结果表明,2中的自旋载体之间存在反铁磁交换作用.5K时的磁滞现象表明2在低温时可能存在铁磁有序,这可能是亚铁磁或自旋倾斜造成的.     

低分子量聚合物电解质的合成与性能

研究了低分子量梳状聚合物电解质的合成方法及结构，性能。首先合成了不同分子量的甲基丙烯酸聚乙二醇单甲醚酯，并进一步合成了分子量一万左右的梳状聚合物电解质，结果表明：反应严格按照反应方程进行，精制产物是非晶的梳状聚合物，本聚合物体系均存在两个玻璃化转变温度，一个在100℃左右，归属为梳状聚合物主链的玻璃化转变，另一个在－20摄氏度以下，归属于侧链玻璃化转变，在室温下侧链可以运动，有利于电活性物质的迁移和扩散，并用超微电极研究了该电解质的行为。     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Crystallization of binary carboxylic acids characterized with streaming potential measurement

The streaming potential of supersaturated solution of binary carboxylic acids, which have even carbon atoms, was determined to characterize crystallization under different temperatures. The value of the streaming potential was related to the type and solubility of the acids and the starting temperature of crystallization, and was easily influenced by the pressure difference of the liquid or the rate of temperature decline. When the temperature was declined to the point where a crystal nucleus appeared, the streaming potential reached the minimum. Thereafter, as the temperature was sequentially lowered, some minicrystals grew, and the streaming potential presented an ascendant tendency. The higher the starting temperature of the acids saturated solution, the higher is the temperature corresponding to the streaming potential minimum. The less the carbon atoms in the acids and the greater the solubility of the acids are, the higher is the temperature of the streaming potential minimum. Copyright © 2007 John Wiley & Sons, Ltd.     

羰基过渡金属异核原子簇(PPh3)2CuFe2Co(CO)8(μ3-S)和(PPh3)3AuFe2Co(CO)7(μ3-S)的合成与表征

本文利用高压法制备HFe₂Co(CO)₉(μ₃-S),作为原料,经脱质子化作用,再分别与(PPh₃)₂Cu(NO₃)和PPh₃AuCl反应,将Ph₃Cu-或Ph₃Au-联接到原始簇合物的中心骨架上,使簇核扩大,得到了组成为(PPh₃)₂CuFe₂Co(CO)₈(μ₃-S)和(PPh₃)₃AuFe₂Co(CO)₇(μ₃-S)的化合物.文中对此两个新化合物进行了IR,UV,¹H和³¹P NMR.元素分析、熔点测定等性质表征,并对(PPh₃)₂CuFe₂Co(CO)₇(μ₃-S)进行了单晶X-射线衍射分析.两个化合物具有类似的中心骨架,在Fe₂和Co原子三角形的上面和下面分别键联着Cu和S,或Au和S原子,构成了三角双锥结构.其中一个簇合物由二个三苯基膦和八个羰基配位,另一个则由三个三苯基膦和七个羰基配位.     

Synthesis and characterization of some carbazole-based imine polymers

Five imine polymers, all containing 3,6-disubstituted carbazole ring in the main polymer chain, were synthesized by solution polycondensation of 3,6-diformyl (N-hexyl) carbazole with hydrazine, 1,4-diaminobenzene, 4,4′-diaminobiphenyl, 1,5-diaminonaphthalene and 3,6-(N-hexyl) diaminocarbazole. The polymers were analyzed by spectroscopic methods and compared with two imine models.