Cellulose-polyamide 66 blends. Part II: Mechanical behavior

Blends of the natural polymer cellulose with a synthetic polymer, polyamide 66, are studied in order to determine if the expected strong interaction between them, due to hydrogen bonds, could improve their mechanical properties such as strength and elongation at break. In a previous work {Part I, J. Polym. Sci. Polym. Phys., 32 , 1437 (1994)}, the preparation technique and the characterization of cellulose-polyamide 66 (PA66) blends were described in detail. Several samples in the composition range between 0 to 70 wt % of PA66 were carefully dried and examined using dynamic mechanical and tensile tests. Based on previous work a new percolation model has been developed. It takes both linear and nonlinear mechanical behaviors into account and allows for the effect of adhesion between material domains. From comparison between experimental and predicted data, it is concluded that a partial miscibility between the amorphous phases of cellulose and PA66 exists and is responsible for a strong adhesion at their interface. Solid-state ¹³C nuclear magnetic resonance has also been used to study these samples and supports the existence of strong interactions between both homopolymers. © 1995 John Wiley & Sons, Inc.     

Learning and transfer in dynamic decision environments

An important aspect of learning is the ability to transfer knowledge to new contexts. However, in dynamic decision tasks, such as bargaining, firefighting, and process control, where decision makers must make repeated decisions under time pressure and outcome feedback may relate to any of a number of decisions, such transfer has proven elusive. This paper proposes a two-stage connectionist model which hypothesizes that decision makers learn to identify categories of evidence requiring similar decisions as they perform in dynamic environments. The model suggests conditions under which decision makers will be able to use this ability to help them in novel situations. These predictions are compared against those of a one-stage decision model that does not learn evidence categories, as is common in many current theories of repeated decision making. Both models' predictions are then tested against the performance of decision makers in an Internet bargaining task. Both models correctly predict aspects of decision makers' learning under different interventions. The two-stage model provides closer fits to decision maker performance in a new, related bargaining task and accounts for important features of higher-performing decision makers' learning. Although frequently omitted in recent accounts of repeated decision making, the processes of evidence category formation described by the two-stage model appear critical in understanding the extent to which decision makers learn from feedback in dynamic tasks. Faison (Bud) Gibson is an Assistant Professor at College of Business, Eastern Michigan University. He has extensive experience developing and empirically testing models of decision behavior in dynamic decision environments.     

AN ENCOMPASSING APPROACH TO MODELING FISHERY DYNAMICS: MODELING DYNAMIC NONLINEAR SYSTEMS

Uncertainty about the nature and significance of nonlinearities and the manner in which dynamics affect future realizations makes model specification the most difficult aspect of modeling dynamic systems. By interpreting several popular fishery models as subcases of a nesting dynamic Taylor series approximation, we isolate the specification differences between these models in a way that accounts for commonalities. On the argument that the differences due to alternative nonlinear forms are likely to be small compared to more mundane considerations such as delay difference and general dynamic lag specification, we propose an alternative model that uses the terms from the first order approximation common to all models combined with a data-based determination of the appropriate lags using the methods of state space time series analysis. Finally, the success of the alternative models is judged in an application to Pacific halibut data.     

Long-range predictive adaptive fuzzy relational control

A class of long-range predictive adaptive fuzzy relational controllers is presented. The plant behavior is described over an extended time horizon by a fuzzy relational model which is identified based on input-output closed-loop observations of the plant variables. In this class of adaptive controllers the control law attempts to minimize a quadratic cost over an extended control horizon. When used with linear models, this approach has revealed a significant potential for overcoming the limitations of one-step ahead schemes, such as the stabilization of non-minimum phase plants. Here, a uniform framework is adopted for implementing both the fuzzy model and the fuzzy controller, namely distributed fuzzy relational structures gaining from their massive parallel processing features and from the learning capabilities typical of the connectivist approaches. Issues such as maintenance during the adaptation process of the meaning of linguistic terms used at both fuzzy systems interfaces are addressed, namely by introducing a new design methodology for on-line fuzzy systems interface adaptation. The examples presented reinforce the claim of the usefulness of this new approach.     

A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

Global Optimal Image Reconstruction from Blurred Noisy Data by a Bayesian Approach

In this paper, a procedure is presented which allows the optimal reconstruction of images from blurred noisy data. The procedure relies on a general Bayesian approach, which makes proper use of all the available information. Special attention is devoted to the informative content of the edges; thus, a preprocessing phase is included, with the aim of estimating the jump sizes in the gray level. The optimization phase follows; existence and uniqueness of the solution is secured. The procedure is tested against simple simulated data and real data.     

Validation and verification of social processes within agent-based computational organization models

The use of simulation modeling in computational analysis of organizations is becoming a prominent approach in social science research. However, relying on simulations to gain intuition about social phenomena has significant implications. While simulations may give rise to interesting macro-level phenomena, and sometimes even mimic empirical data, the underlying micro and macro level processes may be far from realistic. Yet, this realism may be important to infer results that are relevant to existing theories of social systems and to policy making. Therefore, it is important to assess not only predictive capability but also explanation accuracy of formal models in terms of the degree of realism reflected by the embedded processes. This paper presents a process-centric perspective for the validation and verification (V&V) of agent-based computational organization models. Following an overview of the role of V&V within the life cycle of a simulation study, emergent issues in agent-based organization model V&V are outlined. The notion of social contract that facilitates capturing micro level processes among agents is introduced to enable reasoning about the integrity and consistency of agent-based organization designs. Social contracts are shown to enable modular compositional verification of interaction dynamics among peer agents. Two types of consistency are introduced: horizontal and vertical consistency. It is argued that such local consistency analysis is necessary, but insufficient to validate emergent macro processes within multi-agent organizations. As such, new formal validation metrics are introduced to substantiate the operational validity of emergent macro-level behavior. Levent Yilmaz is Assistant Professor of Computer Science and Engineering in the College of Engineering at Auburn University and co-founder of the Auburn Modeling and Simulation Laboratory of the M&SNet. Dr. Yilmaz received his Ph.D. and M.S. degrees from Virginia Polytechnic Institute and State University (Virginia Tech). His research interests are on advancing the theory and methodology of simulation modeling, agent-directed simulation (to explore dynamics of socio-technical systems, organizations, and human/team behavior), and education in simulation modeling. Dr. Yilmaz is a member of ACM, IEEE Computer Society, Society for Computer Simulation International, and Upsilon Pi Epsilon. URL: http://www.eng.auburn.edu/~yilmaz     

慢速饮酒血液中酒精含量的数学模型

描述的是在一定时间内慢慢地匀速喝完一定数量酒的问题,并建立了相应的数学模型.同时也建立了快速饮酒的数学模型,以及证明了在各次饮酒后的某时刻酒精含量的可叠加性.     

Incubation period in the 2,2,4,4‐tetramethyl‐1‐piperidinyloxy‐mediated thermal autopolymerization of styrene: Kinetics and simulations

Mechanisms and simulations of the induction period and the initial polymerization stages in the nitroxide‐mediated autopolymerization of styrene are discussed. At 120–125 °C and moderate 2,2,4,4‐tetramethyl‐1‐piperidinyloxy (TEMPO) concentrations (0.02–0.08 M), the main source of radicals is the hydrogen abstraction of the Mayo dimer by TEMPO [with the kinetic constant of hydrogen abstraction (k_h)]. At higher TEMPO concentrations ([N?] > 0.1 M), this reaction is still dominant, but radical generation by the direct attack against styrene by TEMPO, with kinetic constant of addition k_ad, also becomes relevant. From previous experimental data and simulations, initial estimates of k_h ≈ 1 and k_ad ≈ 6 × 10^?7 L mol^?1 s^?1 are obtained at 125 °C. From the induction period to the polymerization regime, there is an abrupt change in the dominant mechanism generating radicals because of the sudden decrease in the nitroxide radicals. Under induction‐period conditions, the simulations confirm the validity of the quasi‐steady‐state assumption (QSSA) for the Mayo dimer in this regime; however, after the induction period, the QSSA for the dimer is not valid, and this brings into question the scientific basis of the well‐known expression k_th[M]³ (where [M] is the monomer concentration and k_th is the kinetic constant of autoinitiation) for the autoinitiation rate in styrene polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6962‐6979, 2006     

Spatiotemporal and Thermal Analysis of VCSEL for Short-range Gigabit Optical Links

High-speed Optoelectronic Modules using Vertical Cavity Surface Emitting Lasers (VCSEL) coupled to Multi Mode Fibers (MMF) are a performing and low-cost solution for 10 Gigabit Ethernet (10 GbE) in short-distance optical links. A complete model of the spatiotemporal behavior of multimode VCSELs, through static and dynamic response, noise, thermal effects, and its coupling to MMF has been investigated. Relative Intensity Noise shows modal dependence and can be affected by spatial filtering due to coupling and fiber propagation. Simulations permit to evaluate critical parameters, such as modulation formats, launching conditions, and operating temperature for global bandwidth and eye diagram optimization up to 10 Gb/s. Simulation results are compared to measurements on prototype optoelectronic modules.