Self‐Assembly and Compartmentalization of Nanozymes in Mesoporous Silica‐Based Nanoreactors

Herein, to mimic complex natural system, polyelectrolyte multilayer (PEM)‐coated mesoporous silica nanoreactors were used to compartmentalize two different artificial enzymes. PEMs coated on the surface of mesoporous silica could serve as a permeable membrane to control the flow of molecules. When assembling hemin on the surface of mesoporous silica, the hemin‐based mesoporous silica system possessed remarkable peroxidase‐like activity, especially at physiological pH, and could be recycled more easily than traditional graphene–hemin nanocompounds. The hope is that these new findings may pave the way for exploring novel nanoreactors to achieve compartmentalization of nanozymes and applying artificial cascade catalytic systems to mimic cell organelles or important biochemical transformations     

Two 2D Metal‐organic Networks Based on a Rigid Imidazolate/Sulfonate Functionalized Ligand – Effect of the Coordination Modes of the Ligand on Crystal Structures

A rigid imidazolate/sulfonate functionalized ligand, 6‐(4‐sulfonatopheny)imidazo[4, 5‐f]isoindole‐5, 7‐dione (SPID) was designed and used for assembling reactions with Mn²⁺ and Cu²⁺ ions. Two 2D frameworks compounds, [Mn(H_‐1SPID)₂(DMAC)₂] ( 1 ) and [Cu(H_‐2SPID)(H₂O)₂] · 0.7DMAC · 0.3H₂O ( 2 ) (DMAC = N,N‐dimethylacetamide) were obtained. Single crystal X‐ray analyses show that 1 has a 2D (4, 4)‐net based on 4‐connected Mn²⁺ nodes and μ₂‐coordinated H_‐1SPID spacers, whereas compound 2 has a 2D (6, 3)‐net built of 3‐connected Cu²⁺ nodes and μ₃‐coordinated H_‐2SPID spacers. Additionally, the thermal behavior of 1 and 2 is presented.     

Poly(4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene vinylene): Synthesis,optical and photovoltaic properties

A new benzodithiophene (BDT)‐based polymer, poly(4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene vinylene) (PBDTV), was synthesized by Pd‐catalyzed Stille‐coupling method. The polymer is soluble in common organic solvents and possesses high thermal stability. PBDTV film shows a broad absorption band covering from 350 nm to 618 nm, strong photoluminescence peaked at 545 nm and high hole mobility of 4.84 × 10^?3 cm²/Vs. Photovoltaic properties of PBDTV were studied by fabricating the polymer solar cells based on PBDTV as donor and PC₇₀BM as acceptor. With the weight ratio of PBDTV: PC₇₀BM of 1:4 and the active layer thickness of 65 nm, the power conversion efficiency of the device reached 2.63% with V_oc = 0.71 V, I_sc = 6.46 mA/cm², and FF = 0.57 under the illumination of AM1.5, 100 mW/cm². © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1822–1829, 2010     

Synthesis and solvent‐dependent micellization of the amphiphilic block copolymer poly(styreneboronic acid)‐block‐polystyrene

The amphiphilic organoboron block copolymer poly (styreneboronic acid)‐block‐polystyrene ( PSBA‐b‐PS ) has been prepared through a postpolymerization modification route from the silicon‐functionalized block copolymer poly(4‐trimethylsilylstyrene)‐block‐polystyrene ( PSSi‐b‐PS ). PSBA‐b‐PS is obtained through highly selective reaction of PSSi‐b‐PS with BBr₃ at room temperature and subsequent hydrolysis of the BBr₂‐functionalized intermediate. Transmission electron microscopy studies demonstrate that PSBA‐b‐PS undergoes pH dependent micellization in aqueous solution. Different morphologies could be realized by using different mixtures of water and organic solvents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2438–2445, 2010     

Waterborne polyesters partially based on renewable resources

A new experimental approach for preparing biobased, water‐soluble polyesters (PEs) via titanium(IV) n‐butoxide‐catalyzed bulk polycondensation is presented. In the described method polymers were obtained from isosorbide, maleic anhydride and poly(ethylene glycol) (PEG). The chemical structure of the synthesized PEs was confirmed using 2D NMR spectroscopy and by titration methods. Careful analysis of 2D NMR spectra viz. correlation spectra (COSY), heteronuclear single quantum correlation spectra (HSQC) and heteronuclear multiple‐bond correlation spectra (HMBC) allowed to accomplish the complete proton assignment of isosorbide, PEG, and unsaturated acid residues in the PEs. Moreover, by using NMR spectroscopy the transformation of maleic anhydride into fumaric acid ester and the absence of maleic acid ester units in the final polymer were proven. However, during polycondensation part of the unsaturated bonds has reacted in a Michael addition with isosorbide or PEG. Gel permeation chromatography measurements revealed that the unsaturated PEs have M_n values in the range 3000–5000 g/mol. These PEs, with a low content of carboxylic acid end groups, exhibited sufficient thermal resistance for practical applications, for example, as free radical curable coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photo-irradiation effects on the surface morphology of poly(p-phenylene vinylene) films

In this work, we have studied the surface morphology of photo-irradiated poly(p-phenylene vinylene) (PPV) thin films by using atomic force microscopy (AFM). We have analyzed the first-order statistical parameters, the height distribution and the distance between selected peaks. The second-order statistical analysis was introduced calculating the auto-covariance function to determine the correlation length between heights. We have observed that the photo-irradiation process produces a surface topology more homogeneous and isotropic such as a normal surface. In addition, the polymer surface irradiation can be used as a new methodology to obtain materials optically modified.     

Flexible conducting polymer transistors with supercapacitor function

Planar organic electrochemical transistors (OECTs) using PEDOT:PSS as the channel material and nanostructured carbon (nsC) as the gate electrode material and poly(sodium 4‐styrenesulfonate (PSSNa) gel as the electrolyte were fabricated on flexible polyethylene terephthalate (Mylar^®) substrates. The nsC was deposited at room‐temperature by supersonic cluster beam deposition (SCBD). Interestingly, the OECT acts as a hybrid supercapacitor (to give a device that we indicate as transcap). The energy storage ability of transcaps has been studied with two cell configurations: one featuring PEDOT:PSS as the positive electrode and nsC as the negative electrode and another configuration with reversed electrode polarity. Potentiostatic charge/discharge studies show that both supercapacitors show good performance in terms of voltage retention, in particular, when PEDOT:PSS is used as the positive electrode. Galvanostatic charge–discharge characteristics show typical symmetric triangular shape, indicating a nearly ideal capacitive behavior with a high columbic efficiency (close to 100%). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 96–103     

Photocontrolled extraction of uric acid from biological samples based on photoresponsive surface molecularly imprinted polymer microspheres

We aim to develop novel photoresponsive surface molecularly imprinted polymer (SIMP) microspheres, an SiO₂‐SIMP, for the photocontrolled extraction of uric acid from biological samples. The SiO₂‐SMIP was prepared on silica microspheres by surface polymerization and characterized by using scanning electron microscopy, transmission electron microscopy, FTIR spectroscopy, thermogravimetric analysis, nitrogen adsorption–desorption analysis, and UV‐visible spectroscopy. The SiO₂‐SMIP microspheres showed a photocontrolled uptake and release of uric acid in NaH₂PO₄ buffer upon alternate irradiation at 365 and 440 nm. The SiO₂‐SMIP microspheres were able to photocontrollably extract uric acid from complicated biological samples for concentration analysis with no significant interference encountered and it exhibited very good recognition ability and fast binding kinetics toward uric acid.