Isomer combinatorics for acyclic conjugated polyenes: enumeration and beyond

A combinatorial approach to fully conjugated acyclic polyenes (C _N H _{N +2}) is considered with a view to the extension of standard enumeration techniques to treat a widened range of chemically interesting features. As a first step, enumerations are made respecting: placement of single and double bonds, the occurrence of cis/trans isomers, and the degree (and type) of “radicality” of such conjugated networks. As a further extension, several structural (graph-theoretic) invariants averaged over various types of isomer classes and sub-classes are made, and then these invariants are utilized to estimate several physicochemical properties averaged over these same classes or sub-classes. The properties currently so considered are heats of formation, indices of refraction, and magnetic susceptibilities. Finally, the asymptotic behaviors of isomer counts and isomer properties in the many-atom limit is elaborated. Received: 10 August 1998 / Accepted: 17 November 1998 / Published online: 16 March 1999     

利用烷基糖苷迁移和扩张共轭亚油酸囊泡pH窗口

脂肪酸囊泡(FAV)具有与脂质体类似的中空核壳结构, 且原料来源广泛, 绿色安全, 在包埋/缓释方面有重要意义. 但FAV对pH值依赖性强, pH窗口很窄并偏离生命体系适应pH范围, 限制了其作为包埋/缓释体在日用化学品及外用药等中的应用. 本文用绿色安全非离子表面活性剂烷基糖苷(APG)使共轭亚油酸(CLA)形成FAV的pH窗口从原先的8.0-9.0 迁移并扩张至6.0-8.0, 从而与生命体系适应pH值范围相匹配, 并探讨了改善FAV的pH值依赖性和敏感性的原理.     

一新型金属有机化合物在皮秒激光下的三阶非线性光学性质研究

利用皮秒激光光源,采用z扫描技术研究了一种新型金属有机化合物的三阶非线性光学性质以及光限幅特性.z扫描研究结果表明,这种化合物在1064 nm波长激光激发下的三阶非线性极化率χ(3)为3.8×１０-14 esu,并且存在双光子吸收.光限幅实验结果显示双光子吸收和非线性折射两种不同机制决定了该化合物的光限幅特性.     

新型聚苯撑乙烯类阳离子共轭聚合物的合成及其荧光猝灭行为

通过Wittig反应合成了新型聚对苯乙烯撑类阳离子共轭聚合物, 并进行了相关结构表征和光学性质表征. 从1H NMR 谱图分析得知, 该聚合物具有一定含量的顺式构型. 经过季铵化以后得到相应的阳离子共轭聚合物. 荧光猝灭行为研究表明, 该阳离子共轭聚合物表现出不完全荧光猝灭.     

聚合物电致发光材料及其发光颜色调节的研究进展

聚合物电致发光材料已成为功能材料研究领域的一个热点.与无机材料和有机小分子材料相比,聚合物发光材料具有来源广泛、易加工成型、通过分子结构设计可调节发光颜色等优点,成为制备大面积、低成本、全色柔性显示器件的首选材料.本文介绍了聚合物发光材料的发光机理及调节发光颜色的常用方法,综述了聚对苯乙炔类、聚对苯类、聚芴类等多种共轭聚合物发光材料的合成及发光颜色调节的研究现状,并对聚合物发光材料的发展趋势以及聚合物电致发光器件的制备进行了评述和展望.     

Design and synthesis of new donor-acceptor type conjugated copolymers derived from thiophenes

A new series of donor-acceptor type poly(thiophene) derivatives (P1-P3) were synthesized starting from thiodiglycolic acid and diethyl oxalate through multistep reactions. In the final step, the polymerization was carried out using Wittig reaction. This is a good synthetic route for the preparation of any desired p- and n-type copolymers. The optical and potential charge-transporting properties of the copolymers were investigated by UV-vis, fluorescence emission spectroscopy and cyclic voltammetry. The copolymers exhibited bluish-green/green fluorescence in their thin film forms. Cyclic voltammetry experiments showed that these copolymers have low-lying LUMO energy levels ranging from −2.98 to −3.11 eV and high lying HOMO energy levels ranging from −5.45 to −5.65 eV. The optical and electrochemical studies reveal that new copolymers are new promising materials for the development of efficient polymer light emitting diodes.     

单体摩尔比对共聚物电化学及电致变色性质的影响

通过电化学聚合法制备了3, 6-(二噻吩基)-9-(二茂铁甲酸己酯基)-咔唑(BTC-H-Fc)与3, 4-乙烯二氧噻吩(EDOT)不同摩尔比下的共聚物,并运用电化学、傅里叶变换红外(FT-IR)光谱及光谱电化学对其结构与性能进行了表征。研究结果表明所得共聚物均能显示良好的电化学特性,光谱电化学测试结果表明,当摩尔浓度比为1时, P(BTC-H-Fc:EDOT)-1中性态下表现浅绿色,且随着施加电压增加转变为绿色和紫色; P(BTC-H-Fc:EDOT)-4则显示了最丰富的颜色,可在中性态的红褐色、棕黄色、绿色、蓝色和紫色五种颜色之间可逆变换;当摩尔比继续增加时, P(BTC-H-Fc:EDOT)-8可以显示红褐色、灰黑色、蓝绿色和天空蓝四种颜色。另外,三种摩尔比的聚合物薄膜还具有不错的光学对比度,转换响应时间及着色效率,该性能为其在电致变色器件的应用提供了潜力。     

CuAPTPP-TDI-TiO2光催化微球的合成及其光催化性能 (cited: 1)

采用Adler法合成了5-(4-氨基苯基)-10,15,20-三苯基卟啉铜配合物(CuAPTPP),通过甲苯二异氰酸酯(TDI)的桥联作用对TiO₂微球进行表面修饰,使TDI分子中的两个活性TDI基团分别与TiO₂表面的羟基和CuAPTPP的氨基反应,将CuAPTPP敏化剂分子以化学键合的方式固定在TiO₂表面,形成光催化微球CuAPTPP-TDI-TiO₂．通过FT-IR、XRD、SEM、EA、UV-Vis和DRS等测试手段对CuAPTPP-TDI-TiO₂进行结构表征．讨论了桥联分子TDI修饰量对光催化微球性能的影响,确定了TDI与TiO₂的最佳摩尔比．以亚甲基蓝(MB)为降解对象,考察了CuAPTPP-TDI-TiO₂微球的可见光催化性能．结果表明,桥联分子TDI在CuAPTPP与TiO₂微球表面形成了牢固的化学键,复合微球在150 W氙灯辐照下降解10 mg/LMB溶液,120 min降解率可达98.7%,其降解率过程服从一级动力学规律,测得降解速率常数为5.1×10^-2 min^-1,半衰期为11.3 min．催化微球在回收4次的条件下,对MB的降解率仍保持在90%以上．     

Dimethyl(2-oxo-2-ferrocenylethyl)sulfonium iodide—a useful synthetic equivalent of ferrocenoylcarbene in the synthesis of ferrocene-containing cyclopropanes

The reaction of 1-ferrocenyl-3-thiabutan-1-one with methyl iodide in acetonitrile at room temperature gave dimethyl(2-oxo-2-ferrocenylethyl)sulfonium iodide, which was characterized by spectral data (¹H NMR, ¹³C NMR, IR) and X-ray crystallographic analysis. This salt reacted with a base (sodium hydride) in acetonitrile yielding a stabilized ylide—dimethylsulfonium ferrocenoylmethylide, which was in turn, submitted to reactions with seven conjugated enones. The obtained results showed that this methodology is potentially a new and useful approach to ferrocene-containing cyclopropanes.     

非共价键自组装制备聚对苯撑乙炔/聚丙烯酸水溶性荧光纳米粒子及其光物理行为研究

通过功能化聚对苯撑乙炔(含羟基与氨基)和聚丙烯酸之间的非共价键自组装制备了一系列含共轭聚合物的水溶性荧光纳米粒子, 并进行了相关结构和光学性质表征. 研究表明, 纳米粒子的大小和聚丙烯酸/聚对苯撑乙炔质量比直接相关. 光物理性质研究表明, 形成水溶性纳米粒子后, 疏水的聚苯撑乙炔链在纳米粒子中易于形成π-链间聚集, 其光物理性质与其在薄膜态时相似.