Selective biocompatibility and responsive imaging property of cationic conjugated polyelectrolyte to cancer cells

Herein, we bring novel insights into a water-soluble conjugated polyelectlyte by deeply studying its properties in cells and observe fl uorescence enhancement of blue emission and turn-on of long-wavelength emission of PFP in HepG2 cells.     

二次锂电池聚合物正极材料研究进展

近几十年,二次锂电池作为重要的储能装置得到迅猛发展,而开发高性能的锂电池电极材料一直是电化学能源领域的研究热点之一。与传统无机正极材料相比,聚合物正极材料具有比容量高、柔软性好、廉价易得、环境友好、加工方便、可设计性强等诸多优点。本文综述了导电聚合物、共轭羰基聚合物以及含硫聚合物正极材料的结构特点、电极反应机理、电化学性能和近五年来的重大研究进展,总结了这三类聚合物电极材料的优缺点,并重点介绍了含硫聚合物电极材料中存在的问题及改进手段,最后提出了综合这三类聚合物优点的含硫共轭导电聚合物将会是该领域的研究方向。     

基于共轭聚合物的近红外光传感器

近红外光(NIR)传感器在军事警戒、空间勘探、科研检测、医疗诊断等领域有着极为重要的应用价值。传统的NIR传感材料主要是基于半金属的无机材料,借助窄带隙来吸收低能量的NIR而改变材料自身的电导率,继而实现检测。无机传感材料由于加工繁琐、不具备柔性、成本高昂以及难降解等因素致其进一步发展受到限制。新兴的共轭聚合物材料通过光热转换或者能级可调的光电效应实现对NIR的高灵敏传感,同时能够实现快速响应。该类聚合物材料具有π电子离域的共轭结构,同样具有较窄的带隙,在NIR照射下能够通过自身电导率的改变或光热转换作用将热量传递至其他超热敏材料来实现对光的检测。借助柔性、环境友好、制备简单、便于掺杂、灵敏度高等优势,共轭聚合物材料为新一代NIR传感器的应用与普及开辟了新的前景。     

基于氟代异靛蓝并[7,6-g]异靛蓝的共轭聚合物的合成及其半导体性质

采用Stille缩聚,合成了3个异靛蓝并[7,6-g]异靛蓝(DIID)和乙烯单元交替排列的共轭聚合物P0F、P2F和P4F,三者在DIID单元中分别含0、2和4个氟原子(F).3个聚合物均具有良好的平面性,前线分子轨道几乎在整个共轭骨架上离域.它们均具有宽的吸收光谱,吸收范围在400~1000 nm,光学带隙约为1.25 eV;随着氟原子数目的增加,聚合物的最高占有分子轨道(HOMO)和最低空分子轨道(LUMO)能级依次下降0.1~0.2 eV.以这3个聚合物作为活性层,制备了顶栅-底接触型有机场效应晶体管器件,随着氟原子数目的增加,聚合物的传输性质由双极传输变为n型传输.P0F和P2F是双极传输型聚合物,空穴迁移率(μ_h)分别达到0.11和0.30 cm~2 V~(-1) s~(-1),电子迁移率(me)分别达到0.22和1.19 cm~2 V~(-1) s~(-1).P4F是n型聚合物,me达到0.18 cm~2 V~(-1) s~(-1).     

Extended triphenylamine conjugated systems derivatized by perfluorophenyl groups

Two triphenylamine derivatives bearing terminal perfluorophenyl groups have been synthesized. Their HOMO, LUMO levels and electronic band gap have been evaluated by spectroscopic and electrochemical measurements and rationalized with theoretical calculations. X-ray structure analysis of crystals allowed the observation of multiple intermolecular interactions due to the presence of the perfluorophenyl pendant groups. The multiplication of these interactions explains the differences between calculated (in gas phase) and observed (in solid states) structures.     

Stacked 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes: dimer and conjugated microporous polymer

A new [2.2]paracyclophane compound consisting of two 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes stacked in proximity to each other. The compound exhibited a unique absorption band (cyclophane band) and an emission from the phane state, both of which were derived from the π-π stacking of the poorly extended conjugation systems of 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzene. In addition, a conjugated microporous polymer (CMP) that comprises pseudo-para-substituted [2.2]paracyclophane was prepared. The obtained CMP is regarded as a polymer, in which 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes are infinitely stacked to form a network structure. The CMP exhibited a type I nitrogen gas sorption profile and an H4-like hysteresis loop, and possessed the slit-like mesopores with a BET surface area of 501 m² g⁻¹.     

Synthesis and characterization of novel conjugated polymers based on 3-cyclobutene-1,2-dione moiety

Three novel conjugated polymers bearing 3,4-bis（4-hexylthiophen-2-yl）-3-cyclobutene-1,2-dione unit in their main chain have been synthesized successfully in good yields through Suzuki or Stille coupling reaction.Their molecular structures have been confirmed by FT-IR,¹H NMR and ¹³C NMR.All these copolymers exhibit broad and strong absorption bands in UV-vis region,and their optical band gaps are calculated to be 1.6-2.0 eV.suggesting that they have good coverage with the solar spectrum.These polymers have good thermostability and solubility in common organic solvents.Moreover,all these objective macromolecules possess high electron affinity of～3.8 eV determined from cyclic voltammetry measurement,implying that they are potential n-type polymeric photovoltaic materials.     

Synthesis and characterization of novel conjugated polymers based on 3-cyclobutene-l,2-dione moiety

Three novel conjugated polymers bearing 3,4-bis(4-hexylthiophen-2-yl)-3-cyclobutene-1,2-dione unit in their main chain have been synthesized successfully in good yields through Suzuki or Stille coupling reaction.Their molecular structures have been confirmed by FT-IR,~1H NMR and ~(13)C NMR.All these copolymers exhibit broad and strong absorption bands in UV-vis region,and their optical band gaps are calculated to be 1.6-2.0 eV.suggesting that they have good coverage with the solar spectrum.These polymers...     

Synthesis and investigation of photovoltaic properties for polymer semiconductors based on porphyrin compounds as light-harvesting units

We reported on two polymer semiconducting copolymers based on porphyrin compounds, poly[9,9-dioctylfluorene-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PFPor) and poly[9-(heptadecan-9-yl)carbazole-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PCPor), for use as organic photovoltaic materials. The thermal, optical, electrochemical, and photovoltaic properties of the two polymers were investigated. In addition, PC₆₁BM and PC₇₁BM were introduced as acceptor materials to confirm the acceptor effect in bulk heterojunction photovoltaic devices. Moreover, in order to establish acceptor effects, morphologies of polymer/PCBM blend films were analyzed through atomic force microscopy (AFM). PFPor and PCPor exhibited the best device performance with power conversion efficiencies (PCE) of 0.62% and 0.76%, respectively, upon the introduction of PC₇₁BM as the acceptor in the device where 86 wt.% of the PC₇₁BM was contained in the active layer (pol:PC₇₁BM = 1:6, w/w).     

An IR study of poly-1,4-phenylenevinylene (PPV), the 2,5-dimethoxy derivative [(MeO)2-PPV], and their corresponding xanthate precursor polymers and monomers

A detailed comparison of the infrared (IR) spectra of poly-1,4-phenylenevinylene (PPV), its xanthate precursor polymer, and its bis-xanthate precursor monomer along with the corresponding 2,5-dimethoxy derivatives has provided a clearer basis for characterizing these species with regard to both structure and purity. All the xanthate precursor monomers and polymers exhibit characteristic intense absorptions typical of the xanthate group near 1220, 1110, and 1050 cm(-1). Upon complete conversion of the precursor polymer to the vinylene linked final product, the intense IR peaks of the xanthate group have disappeared and new bands resulting from the vinylene linkages are found. The latter include a moderately strong band near 965 cm(-1) due to the out-of-plane -CHCH- deformation of the trans-vinylene conjugated with and linking the phenyl rings into an optoelectronic polymer. Unfortunately, the corresponding C-H stretching vibration of this same group of atoms expected to appear near 3020 cm(-1) falls in the same region of the spectrum as the aromatic C-H stretches of the phenyl rings. Similarly, for the 2,5-dimethoxy polymer derivative, [(MeO)(2)-PPV], the C-H stretching vibration near 3055 cm(-1) contains contributions from both aromatic and vinylene C-H. Density functional theory (DFT) calculations on the monomers were instrumental in assigning the infrared spectra of these materials. This study provides a systemic means for verifying that the precursor monomer has been polymerized into the precursor polymer and that thermal conversion to the conjugated polymer is complete.