光纤法布里-珀罗传感器腔长的傅里叶变换解调原理研究

在宽带光源条件下对光纤法布里-珀罗传感器腔长的傅里叶变换解调原理进行了详细的理论推导,在此基础上给出了具体的实现算法和仿真对比实验.仿真结果表明:采用傅里叶变换可以有效地对光纤法布里-珀罗传感器进行腔长解调.     

基于半导体材料的新型光纤温度传感器

提出利用全反射定律以半导体材料作为敏感器件的光纤温度传感器，着重阐述半导体材料的温度敏感特性及传感原理，介绍传感器构造，并给出初步实验方案。     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

开关型霍尔传感器的原理与工程实现

介绍了开关型霍尔传感器的工作原理，设计了适用于工程测量的具体线路，并分析了该线路的特点。     

硅色敏器件对复色光色差辨识能力的数值分析

对复色光的光谱功率分布和色敏器件光谱响应的实验曲线进行了函数拟合，采用Mathematica 4．2计算了具有不同峰值波长和半高宽的高斯分布的复色光在色敏器件中产生的电流比．计算结果表明，待测复色光的峰值波长和半高宽变化对两种典型的色敏器件的输出信号影响的权重比分别为100：1和10：1。权重比说明色敏器件的输出电流比随峰值波长和半高宽的变化非常灵敏，但两者权重不同，其中峰值波长的变化影响更为显著，是影响复色光颜色变化的主要因素．数值分析的结果表明，硅双结色敏器件对复色光色差有良好的辨识能力．两种器件权重比的差异说明了器件制作工艺与其辨识能力的关系，为器件合理设计提供了理论依据．     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

Determination of Hydrogen Single Ion Activity Coefficients in Aqueous HCl Solutions at 25°C

The single ion activity coefficients of hydrogen and chloride ions in aqueous HCl solutions have been estimated at 25°C at concentrations up to 1 mol-kg^–1, using potentiometric measurements with ion-selective electrodes and appropriate calibration procedures. Two methods are described for an internal calibration of the electrodes in the extended Debye–Hückel concentration range. The results are compared to the conventional pH calibration with external buffer solutions. Since the latter calibration method does not account for the liquid junction potential E _J which arises at the reference electrode, the resulting activity coefficients are quite different in HCl solutions of higher concentration. These differences between internal and external calibration decrease significantly, when a correction for E _J is introduced into the conventional pH calibration. Hence, in solutions of higher ionic strength the accuracy of the conventional pH electrode calibration using buffer solutions is very limited, when exact H⁺ activities are required. The consistency of the results indicates that the liquid junction potentials in the examined systems calculated by the Henderson/Bates approximation are of reasonable precision.     

Novel optical film sensor design based on p-polarized reflectance

A new scheme of optical film sensor is presented. The sensor is based on p-polarized reflectance, consisting of a sensing coated substrate, is easily optimized for maximum sensitivity in different applications. The resolutions of refractive index n_f, extinction coefficient k_f and thickness h_f of the sensitive films are predicted to be 10⁻⁷, 10⁻⁵ and 10⁻³ nm, respectively. Experimentally, we selected the sol–gel derived SnO₂ films as gas-sensitive films and conducted preliminary gas-sensing test. The results indicate that novel optical film sensor scheme has higher sensitivity, and the detection sensitivity is available to 10⁻¹ ppm on the condition of optimum optical parameters and incident angle.