Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

用热聚法固定指示剂的光纤氧气传感器研究

采用热聚法将甲叉双丙烯酰胺（MBBA）聚合并共价交联在硅烷化的玻璃微珠上 ，同时将指示剂Ru（Ⅱ）-邻啡咯啉配合物物理包埋于聚合物中，研制了一种基于 荧光猝灭原理的光纤氧气传感器，采用NaHSO_3-O_2-MnSO_4体系引发MBBA水溶液热 聚合后应，通过确定NaHSO_3,MnSO_4,MBBA和Ru(phen)_3Cl_2的最佳反应浓度以及 玻璃微珠的尺寸，优化了聚合反应条件，改善了指示剂的固定效果，制备了性能较 好的传感器探头，该传感器的检测下限为5×10~(-6)(V/V)，响应时间为10s该传感 器连续工作50min,重复性标准偏差为±1%。     

溶液酸度在线检测装置的研制

研制了酸度在线检测装置，并应用于溶液酸度在线检测，溶液酸度在线检测装置，设有防污过滤器，自动采样器，蠕动泵，小型管道ｐＨ传感器和控制电路等，其特点为防污除油，随机自动采样，定时检测，全部管道化，可单独使用和计算机控制系统联网，适用于溶液酸在线分析，测定精度〈ｐＨ０．０５。     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

All-solid-state planar miniature ion-selective chloride electrode

All-solid-state ion-selective electrodes with plastic membrane (poly(vinyl chloride) (PVC), bis(2-ethylhexyl) sebacate (DOS), methyltri-n-tetradecylammonium chloride (MTTACl)), a conducting poly(pyrrole) (PPy) film doped either with chloride ions (PPyCl) or hexacyanoferrate(II) ions (PPyFeCN), and glassy carbon (GC) or screen-printed graphite layer (S-PG) as an inner electric contact were investigated. All the electrodes show close to Nernstian response, but their lifetimes vary. The at least 2-months lifetime of screen-printed electrodes is only achieved for the electrodes containing PPyFeCN (cation-exchanging film). Shorter lifetime of other screen-printed electrodes, i.e. without PPy, or with PPyCl (anion-exchanging film), was attributed to the diffusion of anionic products of the hydrolysis of organic components of the graphite paste used to prepare the electric contact. The properties of miniature, screen-printed electrodes comprising PPyFeCN solid contact, were comparable to those ion-selective electrodes with PPy solid contact (regardless the ion-exchanging characteristic of the polymer) deposited on GC electric contact.     

Planar potentiometric sensors based on Au and Ag microelectrodes and conducting polymers for flow-cell analysis

Back-side contact Au and Ag microelectrodes were used as transducers to construct planar all-solid-state electrodes suitable for flow-through analysis. The microsensors were based on plasticized PVC potassium-selective membranes containing ion-electron conducting polymer—polypyrrole doped with di(2-ethylhexyl) sulfosuccinate. The proposed technique allowed simple construction of microsensors in one step, by membrane solution casting directly on the surface of the planar metallic transducers. The performance of the microsensors based on Au and Ag transducers were determined and compared with planar sensors based on internal electrolyte immobilized in polyHEMA. The addition of the polypyrrole to the membrane composition did not influence on the selectivity, reproducibility and long-term stability of the microsensors but improved their standard potential stability in time in comparison with coated-wire type sensors. Moreover, all-solid-state microsensors based on Au transducers exhibited better signal stability than Ag based sensors.     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

纳米SiO_2颗粒表面修饰的有机分子在介质中的光物理行为研究

利用Sol-Gel方法投篮了单分散性很好的球型二氧化硅纳米颗粒，通过表面化 学修饰法引入了带有荧光发色团的有机分子，通过稳态光物理方法研究了纳米颗粒 表面的有机分子在水、乙醇以及阴、阳离子表面活性剂悬浮液中的光物理行为。实 验表明，纳米颗粒表面有机分子的分散状态是决定其光物理行为的主要因素。这一 结果为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的参考。     

铅笔芯修饰聚苯胺制作微型复合pH电极的性能

在0.3mm直径的铅笔芯上电修饰聚苯胺,封入玻璃毛细管中,并与Ag/AgCl电极组合成复合微型pH电极.经实验测试,该电极的pH响应特性良好,在pH1～11的线性范围内,能斯特斜率为(-56.4±0.5)mV/pH,线性相关系数不小于0.996.作为参比的Ag/AgCl电极性能稳定.由于电极是复合微型化的,所以可用于活体微区测定.