A Highly Accurate Refractive Index Sensor with Two Operation Modes Based on Photonic Crystal Ring Resonator

A 2D hole‐type hexagonal lattice photonic crystal is utilized, herein, to detect the refractive index change of the material infiltrated into the designed circular sensing area which also resembles a ring resonator. The accuracy of the detection process is enhanced considering the simultaneous shift of the resonance wavelengths and the intensity modulation which occur in two separate spectral regions. The presented structure has the ability to detect liquids, material concentrations in fluids and gases having refractive indices in the range of n = 1–2 with sensitivity and quality factor of 61 nm/RIU and 3000, respectively, for resonance‐wavelength‐shift‐based operation. The detection range of n = 1–1.4 with the sensitivity of S = 0.69 NI/RIU is achieved for the intensity‐based measurement and the results show good linearity in the operating range.     

Highly Selective Optical Detection of Fe3+ Ions in Aqueous Solution Using Label‐Free Silicon Nanocrystals

High brightness amine‐terminated silicon nanocrystals (Si NCs) have been utilized in a simple and rapid assay for the highly selective and sensitive detection of Fe³⁺ via quenching of their strong blue luminescence, without the need for analyte‐specific labeling groups. Sensitive detection of Fe³⁺ is successfully demonstrated, with a linear relationship observed between luminescence quenching and Fe³⁺ concentration from 5 × 10^?6 to 900 × 10^?6m and a limit of detection of 1.3 × 10^?6m . The Si NCs show excellent selectivity toward Fe³⁺ ions, with no quenching of the luminescence signal induced by the presence of Fe²⁺ ions, allowing for solution phase discrimination between the ionic species in different charge states.     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

Free radical oxidation reaction for selectively solvatochromic sensors with dynamic sensing ability

A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.     

Self‐Assembly of Ag6 Clusters into Nanowires for Nonenzymatic Electrochemical Sensing of Glucose

Self‐assembly of metal nanoclusters into 3D ordered superstructures and the exploration of their electrochemical properties are highly significant for fundamental research and practical application. In this study, atomically precise Ag₆(NALC)₅ nanoclusters are successfully synthesized and their structure is determined carefully. It is interesting that the prepared Ag₆(NALC)₅ nanoclusters can be self‐assembled into ultrafine nanowires, long ribbons, and finally 3D porous network in the mixed solution of water and ethanol, which can be attributed to the solvent polarity, static electricity interaction between ligands, and the possible Van der Waals attractions. Such assembly phenomenon lays a foundation for the future fabrication of silver clusters‐based nanodevices. In addition, the synthesized silver nanoclusters can be used for electrochemical sensing of glucose with high detection sensitivity, selectivity, and low limit of detection. This work is expected to be helpful for the synthesis of atomically precise metal nanoclusters and their applications in fabrication of nanodevices for chemical sensors.     

Deep insights into the hydrolysis of N,N‐dialkylaminoethyl methacrylates in aqueous solution with 1H NMR spectroscopy

N,N‐dialkylaminoethyl methacrylate (DAEA) monomers are extensively used to prepare multi‐responsive polymers. However, these monomers face high risk of hydrolysis in their ester groups when being polymerized in water‐containing medias. Here, NMR spectroscopy was employed to continuously track the hydrolysis and solubility of four widely used DAEA monomers [CH₂CH₂R₁COO(CH₂)₂N(R₂)₂; R₁ = H or CH₃; R₂ = CH₃, CH₂CH₃ or CH(CH₃)₂] under typical polymerization conditions. With this technique, the hydrolysis reactivity and absolute hydrolysis amount of these monomers are separately examined, and then their kinetic correlations with solubility, molecular structure, pH, and temperature are established, so that the hydrolysis of DAEA monomers and even other esters with similar cyclic structure can be predicted. The present efforts are expected to provide a general understanding for the hydrolysis of all the DAEA monomers, benefitting to the optimization of polymerization toward well‐defined DAEA copolymers, as well as the design of smart soft matter for specific applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 914–923     

Gold nanoparticles having dipicolinic acid imprinted nanoshell for Bacillus cereus spores recognition

Taking into account the recognition element for sensors linked to molecular imprinted polymers (MIPs), a proliferation of interest has been witnessed by those who are interested in this subject. Indeed, MIP nanoparticles are theme which recently has come to light in the literature. In this study, we have proposed a novel thiol ligand-capping method with polymerizable methacryloylamidocysteine (MAC) attached to gold nanoparticles, reminiscent of a self-assembled monolayer. Furthermore, a surface shell by synthetic host polymers based on molecular imprinting method for recognition has been reconstructed. In this method, methacryloyl iminodiacetic acid-chrome (MAIDA–Cr(III)) has been used as a new metal-chelating monomer via metal coordination–chelation interactions and dipicolinic acid (DPA) which is the main participant of Bacillus cereus spores has been used as a template. Nanoshell sensors with templates produce a cavity that is selective for DPA. The DPA can simultaneously chelate to Cr(III) metal ion and fit into the shape-selective cavity. Thus, the interaction between Cr(III) ion and free coordination spheres has an effect on the binding ability of the gold nanoparticles nanosensor. The interactions between DPA and MIP particles were studied observing fluorescence measurements. DPA addition caused significant decreases in fluorescence intensity because they induced photoluminescence emission from Au nanoparticles through the specific binding to the recognition sites of the crosslinked nanoshell polymer matrix. The binding affinity of the DPA imprinted nanoparticles has been explored by using the Langmuir and Scatchard methods and the analysis of the quenching results has been performed in terms of the Stern–Volmer equation.     

Highly sensitive digital optical sensor with large measurement range based on the dual-microring resonator with waveguide-coupled feedback

We propose a novel high-performance digital optical sensor based on the Mach-Zehnder interferential effect and the dual-microring resonators with the waveguide-coupled feedback. The simulation results show that the sensitivity of the sensor can be orders of magnitude higher than that of aconventional sensor, and high quality factor is not critical in it. Moreover, by optimizing the length of the feedback waveguide to be equal to the perimeter of the ring, the measurement range of the proposed sensor is twice as much as that of the conventional sensor in the weak coupling case.     

太阳米粒结构相关哈特曼-夏克波前传感模拟研究

基于互相关因子和绝对差分算法以及相关哈特曼－夏克波前传感器的基本原理，根据室内模拟太阳米料结构研究了低对比度扩展目标情况下应用相关哈特曼－夏克波前传感器探测波前误差的可行性，结果表明，相关哈特曼－夏克波前传感器能够有效探测光学波前误差。     

哈特曼夏克传感器的泽尼克模式波前复原误差

利用哈特曼－夏克传感器测量圆孔径内波像差时，通常使用泽尼模式复原算法。推导了一般情况下哈特曼－夏克传感器泽尼克模式波前复原误差的计算公式。用哈特曼－夏克传感器测量一个像差板的随机静态像差，通过与ZYGO干涉仪的测量结果比较，得到不同泽尼克模式复原阶数下的波前复原误差的实验结果，并与理论计算结果进行了对比。