磁性三维氮掺杂碳纳米材料对6种双酚类化合物的吸附性能及其在泡腾分散微萃取中的应用

采用简单高温煅烧法成功制备了磁性钴镍基氮掺杂三维碳纳米管与石墨烯复合材料(CoNi@NGC),将其作为吸附剂用于水体中6种双酚类化合物(BPs)的吸附性能和机理研究。将CoNi@NGC复合纳米材料用作萃取介质,运用酸碱泡腾片的CO₂强力分散作用,开发了泡腾反应强化的分散固相微萃取前处理方法,结合高效液相色谱-荧光检测(HPLC-FLD)快速定量饮料中痕量BPs。采用扫描电镜、透射电镜、傅里叶红外光谱、氮气吸脱附、X射线光电子能谱和磁滞回线等技术手段对材料形貌结构进行表征,结果显示:该吸附剂成功实现氮元素的掺杂,且具有较大的比表面积(109.42 m²/g)、丰富的孔径及较强的磁性(17.98 emu/g)。吸附剂投加量、pH、温度、时间等因子优化试验表明:当pH=7,在初始质量浓度为5 mg/L的BPs混合溶液中投加5 mg CoNi@NGC, 298 K反应5 min,对双酚M(BPM)、双酚A(BPA)的吸附率分别高达99.01%和98.21%。作用90 min时对双酚Z(BPZ)、BPA、BPM的吸附率近100%。在吸附过程中,BPs与CoNi@NGC之间的整个吸附过程主要受氢键、静电作用和π-π共轭作用共同控制。整个吸附过程符合Freundlich吸附等温线模型和准二级动力学方程,吸附自发进行。进一步将CoNi@NGC作为萃取介质制备成磁性泡腾片,利用泡腾分散微萃取技术高效富集和提取6种盒装饮料中的BPs,优化了影响富集效果的泡腾片的存在与否、洗脱剂种类、洗脱时间、洗脱体积等关键因子,在最佳萃取条件下(pH=7,投加5 mg CoNi@NGC, 2 mL丙酮洗脱6 min),结合HPLC-FLD,新开发的泡腾分散微萃取方法提供的检出限为0.06~0.20 μg/L,定量限为0.20~0.66 μg/L,日内和日间精密度分别为1.44%~4.76%和1.69%~5.36%,在实际样品中不同水平下的加标回收率为82.4%~103.7%,在桃汁中检测到BPA和双酚B(BPB)分别为2.09 μg/L和1.37 μg/L。再生试验表明该吸附材料至少可以重复使用5次以上,显著降低了分析的试验成本。与其他方法相比,该方法具有灵敏度高、萃取速度快、环境友好等优点,在常规食品污染监测中具有较强的应用价值。     

Optimization of Direct Blue 71 sorption by organic rich-compost following multilevel multifactor experimental design

Removal of a troublesome textile dye, Direct Blue 71 (DB71) from water by a food waste compost was assessed in the current study. Since compost dye sorption is a multi-factor process influenced by mass, pH, concentration, temperature, contact time, and salinity, the cumulative influence of all parameters on DB71 removal was examined following an optimal multilevel multifactor experimental design. The process had to be presented using both linear and interaction terms, according to the variables analysis: Dye sorption = –0.050Mass + 0.122Conc–0.114pH + 0.132Time – 0.074Temp + 0.056Sal + 0.103Mass × Conc + 0.226 Mass × pH – 0.257Mass × Time – 0.112Mass × Temp – 0.041Mass × Sal + 0.008Conc × pH + 0.100Conc × Time + 0.089Conc × Temp + 0.167Conc × Sal – 0.245pH × Time – 0.231pH × Temp – 0.123pH × Sal + 0.358Tim × Temp + 0.355Tim × Sal – 0.045Temp × Sal (R² = 0.9241)Salinity and pH were positively correlated with concentration, and contact time with temperature and salinity, to get better dye uptake. The optimal conditions for dye removal were the following: solid:liquid ratio 1:375, pH 3.0, initial dye concentration 400 mg L^?1, contact time 240 min, salinity 0.6 M NaCl, temperature 50 °C. At the optimum combination of factors, equilibrium sorption isotherm and sorption kinetics were studied. Kinetic analysis indicated high sorption rate 4.0 mg g^?1 min^?1 while 28% of maximum capacity was reached within the first 10 min of interaction. Sorption isotherm has L2-shape which reflected surface saturation at high solute concentration with low competition with solvent molecules, with a maximum sorption capacity of 95.4 mg g^?1. In column experiments performed at bed depth 5.1–12.8 cm, flow rate 1.0–2.0 mL min^?1 and influent concentration 10–20 mg L^?1, sorption capacity was 19.6 mg g^?1, which represents 21% of the maximum capacity at equilibrium conditions. IR analysis of dye-loaded-compost confirmed the contribution of hydrophobic-hydrophobic forces in the sorption process.     

Microbial Application to Improve Olive Mill Wastewater Phenolic Extracts

Olive mill wastewater (OMW) contains valuable and interesting bioactive compounds, among which is hydroxytyrosol, which is characterized by a remarkable antioxidant activity. Due to the health claims related to olive polyphenols, the aim of this study was to obtain an extract from OMW with an increased level of hydroxytyrosol by means of microbial enzymatic activity. For this purpose, four commercial adsorbent resins were selected and tested. The beta-glucosidase and esterase activity of strains of Wickerhamomyces anomalus, Lactiplantibacillus plantarum, and Saccharomyces cerevisiae were also investigated and compared to those of a commercial enzyme and an Aspergillus niger strain. The W. anomalus strain showed the best enzymatic performances. The SP207 resin showed the best efficiency in selective recovery of hydroxytyrosol, tyrosol, oleuropein, and total phenols. The bioconversion test of the OMW extract was assessed by using both culture broths and pellets of the tested strains. The results demonstrated that the pellets of W. anomalus and L. plantarum were the most effective in hydroxytyrosol increasing in phenolic extract. The interesting results suggest the possibility to study new formulations of OMW phenolic extracts with multifunctional microorganisms.     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

连动型抗干扰干涉具井下瓦斯浓度监测系统（英文）

针对井下甲烷浓度监控干扰大的问题,结合实时监测甲烷浓度的系统要求,设计角镜连动的自消震光学结构,构建了基于无线网络的实时数据通信系统.在干涉系统中,固定两个角镜位置,将两片半透半反镜用连杆结构同步旋转,由此产生光程差.由于采用了连杆结构,任意时刻引入的震动在两个分束镜上等量存在,其结果是差分值,可实现完全相消.由分析分束器的最大旋转范围计算得到系统的光程差变化范围.结合比尔朗伯定律,给出系统在井下工作的甲烷气体浓度最低检出限.分别在实验室及矿井主巷道中完成实验过程,通过化学反应法求得被测甲烷气体的标准浓度,与WQF530型光谱分析仪的测试结果作比较,结果表明:在实验室无干扰条件下,两种检测方法的相对误差均小于1.0%;在井下实验中,传统光学检测方法受环境影响明显,相对误差大幅增加,而本系统测试结果基本稳定,具有较强的抗干扰能力及较高的稳定性.     

Crystal growth of cyclodextrin‐based metal‐organic framework with inclusion of ferulic acid

The crystallization of γ‐cyclodextrin‐based metal‐organic framework (CD‐MOF) with inclusion of ferulic acid (FA) was carried out through vapor diffusion of methanol to the aqueous solution of γ‐cyclodextrin (γ‐CD), KOH and FA. Although the crystallization of pure CD was limited in highly basic solution of KOH (pH>13.0), the CD‐MOF with inclusion of FA (FA/CD‐MOF) was able to be formed at pH 6.8 after the neutralization of KOH by FA. The inclusion behavior of FA in CD‐MOF was studied by using differential scanning calorimetry. The data indicate the formation of the stable association between FA and γ‐CD in FA/CD‐MOF.     

Preconcentration of chlorophenols in water samples using threedimensional graphene-based magnetic nanocomposite as absorbent

In this paper, a novel magnetic solid-phase extraction method using three-dimensional graphene-based magnetic nanocomposite as adsorbent for the preconcentration of several chlorophenols from water samples prior to high-performance liquid chromatography analysis was developed. Various experimental parameters were investigated. Under the optimum conditions, the enrichment factors of the method were in the range of 186–312, and the limit of detection(S/N = 3) was 0.10 ng/mL. The recoveries of the method were in the range between 85.1% and 101.2%. The developed method has been successfully applied to the determination of chlorophenols in environmental water samples.     

汽油吸附脱硫研究进展

吸附脱硫方法以其操作简单、投资少、适合于深度脱硫、无污染等优点得到了较快的发展。本文较详细地介绍了活性炭、分子筛、金属氧化物和黏土材料等汽油脱硫吸附剂的研究进展。     

胶原-单宁树脂的制备及其对水溶液中UO2+2的吸附特性研究

以天然牛皮为原料,经胃蛋白酶处理制得水解胶原;通过胶原-黑荆树单宁-醛反应制备了胶原-单宁树脂(C-TR)吸附材料,并表征了材料的形貌,测定了材料的比表面积、热变形温度等性质。系统研究了C-TR对水溶液中UO22 的吸附特性。结果表明,C-TR对UO22 有较强的吸附能力。当温度为303K、pH=5.0、UO22 的初始浓度2.5mmol.L-1时,吸附容量达到1.49mmolU/g。升高温度,平衡吸附量增大。pH对吸附容量的影响较大,适宜的pH范围为5.0-6.0。C-TR对UO22 的吸附平衡符合Freundlich方程。吸附动力学可用拟二级速度方程来描述。C-TR对UO22 的吸附基本不受NaCl影响,该吸附材料可望用于海水中铀的富集和分离。     

Synthesis and Absorption Properties of New Na Specific Adsorbent Li（1＋x）AlxTi（2-x）（PO4）3

A new kind of adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was synthesized by solid state reaction method. The influence of the content of doping aluminum on the adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was investigated by XRD, while the morphology of powders was observed by SEM. The investigation of the adsorption properties showed that the adsorbent can selectively adsorb sodium with the adsorption capacity of 11.76 mg/g. The optimum conditions of adsorption are at pH 10.0-11.0 in LiCl solution.