Evaluation of the enantiomeric selectivity in the chiral ligand-exchange chromatography of amino acids by a computational model

The chromatographic resolution of enantiomeric amino acids is accomplished on a reversed phase column using aqueous mobile phase containing the chiral reagent N,N-dimethyl-S-phenylalanine-Cu(II). The separation is a result of the whole interaction between the diastereomeric complex surface and the mixed stationary phase realized by the dynamic coating of the RP-18 carbon chains layer. The elution order seems to be related to the different water coordination capability on copper ion in the formation of the mixed ternary complexes.     

On the cost of approximating all roots of a complex polynomial

This work examines the computational complexity of a homotopy algorithm in approximating all roots of a complex polynomialf. It is shown that, probabilistically, monotonic convergence to each of the roots occurs after a determined number of steps. Moreover, in all subsequent steps, each rootz is approximated by a complex numberx, where ifx ₀ =x, x _j =x _j–1 –f(x _j–1)/f(x _j–1),j = 1, 2,, then |x _j –z| < (1/|x ₀ –z|)|x _j–1–z|².     

Pyrolysis study of fluorinated sol-gel silica

Fluorinated silica gels at various fluorine content were prepared via sol-gel by hydrolysis of 3,3,3-trifluoropropyltrimethoxysilane and tetraethoxysilane mixtures. The gels, of nominal stoichiometry Si(CH₂CH₂CF₃)_XO_(2-X/2)(X=0.1-1), were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS) and N₂ adsorption analysis. The thermal stability of the fluorinated samples was investigated by coupling thermogravimetric measurements with mass spectrometric and gas chromatographic analyses of the evolved gaseous species. The chemical reactions occurring in the gel matrices during heating were siloxane chain rearrangements involving condensation between residual hydroxyl and ethoxyl groups in the 100-350°C temperature range, whereas the thermal decomposition of the fluoroalkyl groups were observed at higher temperatures (450-600°C). The release of the fluoroalkyl moieties also involved C-F/Si-O bond exchanges inside the siloxane chains, with gas-phase evolution of different fluorinated silicon units. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studies in werner clathrates. Part 2. Structures of bis (isothiocyanato) tetra (4-phenylpyridine) nickel (II)· 4-dimethylsulphoxide,bis (isothiocyanato) tetra (3-methylpyridine) nickel (II)· chloroform and bis (isothiocyanato) tetra (3,5-dimethylpyridine) nickel (II)

The structures of Ni(NCS)₂(4-PhPy)₄·4DMSO and Ni(NCS)₂(3-MePy)₄·CHCl₃ have been elucidated. Movement of guest molecules through channels in the host structure was simulated by potential energy calculations. Ni(NCS)₂(3,5-diMePy)₄ does not form inclusion compounds. An intra-molecular potential energy study shows that theortho-hydrogens on the 3,5-dimethylpyridine ligands control the conformation of the molecule. The same result is obtained with the 4-methylpyridine ligand, which suggests that the extent of rotation of substituted pyridines about the Ni–N bounds is not a factor governing clathrate formation. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82030 (43 pages).     

Topologisch und elektronisch bemerkenswerte „reduzierte”︁ Cluster des Typs [V18O42(X)]n− (X = SO4, VO4) mit Td-Symmetrie und davon abgeleitete Cluster [V(18–p)As2pO42(X)]m− (X = SO3, SO4, H2O; p = 3, 4)

Reduced Clusters with Remarkable Topological and Electronic Properties of the Type of [V₁₈O₄₂(X)]^n? (X = SO₄, VO₄) with T_d-Symmetry and Related Clusters [V_(18—p)As_2pO₄₂(X)]^m? (X = SO₃, SO₄, H₂O; p = 3, 4) The novel cluster-compounds Na₆[V₁₈O₄₂H₉(VO₄)] · 21 H₂O, (NH₄)₈[V₁₈O₄₂(SO₄)] · 25 H₂O, K₆[V₁₅As₆O₄₂(H₂O)] · 8 H₂O, (NH₄)₆[V₁₄As₈O₄₂(SO₃)], (NH₄)₆[V₁₄As₈O₄₂(SO₄)] and [N(CH3)₃]₄[₄V₁₄As₈0₄₂(H₂0)] were prepared and characterized by IR- and UV/Vis/NIR-spectroscopy, magnetic measurements and complete crystal structure analysis. For structural data see Inhaltsübersicht. Topological relations to the rhombicuboctahedron spanned by 24 0-atoms of the genuine hypothetical a-Keggin ion, at which the square planes are capped by V?O or As₂O groups, are discussed. Of particular interest are the ?extended”? Keggin ions [V₁₈O₄₂(X)]ⁿ- (X = SO₄ VO₄), (formaly derived from the hypothetical genuine a-Keggin ion by addition of six V?O groups) which have quite different electron populations in spite of the same structure of their cluster shells.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

Computational studies on glyceraldehyde and glycine Maillard reaction—I

Mechanisms for the initial stage of glyceraldehyde and glycine Maillard reaction under different pH conditions have been proposed, following usually the Hodge-scheme. Computations have been performed on the mechanisms at the standard state to test the possibility of the formation of different compounds, through evaluating the changes in Gibb's free energy during the reaction. Electronic energy changes during the reaction have also been evaluated. Glyceraldehyde+deprotonated glycine reaction has been found to be the most favorable for the formation of the Amadori rearrangement products in both gaseous and aqueous states. Due to the possibility of the production of both enol and keto forms of the Amadori rearrangement product, the rate of browning in glyceraldehyde+deprotonated glycine reaction is assumed to be faster than the others. Glyceraldehyde+unionized glycine reaction has been found to be more plausible for the formation of the keto form of the Amadori rearrangement products, particularly, in the gaseous phase. Glyceraldehyde+protonated glycine and glyceraldehyde+glycine zwitterion reactions are not favorable for the formation of the Amadori rearrangement products. Formation of hydroxyacetaldehyde from glyceralaldehyde, as one of the possible C2-fragmentation product, has been found to be favorable in the aqueous state.     

Thermal behavior of Cu(II)-, Cd(II)-, and Hg(II)-exchanged montmorillonite complexedwith cysteine

The thermal behavior of montmorillonite and organically modified montmorillonite, both treated with heavy metal cations [Cu(II), Cd(II) and Hg(II)], was characterized via thermal analyses (TG, DTG and DTA) combined with evolved species gas mass spectrometry (MS-EGA), and X-ray diffraction at in situ controlled temperature (HTXRD). The reactions involving Cu(II)- and Cd(II)-montmorillonite samples are mostly related to H₂O and OH loss, unlike Hg(II)-montmorillonite, where effects associated to Hg(II) loss are also present. Finally reactions related to dehydration, dehydroxylation and to organic matter decomposition can be observed in montmorillonite samples treated with cysteine.     

Energetic and topological analyses of the oxidation reaction between Mo(n) (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the N--O bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low-lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the N--O bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin-forbidden transitions. These results fully agree with previous experimental works.     

On a class of least-element complementarity problems

The present paper studies the linear complementarity problem of finding vectorsx andy inR ₊ ⁿ such thatc + Dx + y 0,b – x 0 andx ^T (c + Dx + y) = y ^T (b – x) = 0 whereD is aZ-matrix andb > 0. Complementarity problems of this nature arise, for example, from the minimization of certain quadratic functions subject to upper and lower bounds on the variables. Two least-element characterizations of solutions to the above linear complementarity problem are established first. Next, a new and direct method to solve this class of problems, which depends on the idea of least-element solution is presented. Finally, applications and computational experience with its implementation are discussed.Research partially supported by the National Science Foundation Grant MCS 71-03341 A04 and the Air Force Office of Scientific Research Contract F 44620 14 C 0079.