Diffusion-based calibration for solid-phase microextraction of benzene, toluene, ethylbenzene, p-xylene and chlorobenzenes from aqueous samples

Short-term solid-phase microextraction (SPME) was performed to test a recently proposed semi-empirical model for the prediction of concentrations of analyte in water samples from the fibre-extracted mass without further calibration. The mass uptake rates obtained for benzene, toluene, ethylbenzene and p-xylene (BTEX) differ considerably from the before published, showing that interfibre comparability is a serious issue. The relative prediction errors are between -55% for benzene and +82% for p-dichlorobenzene under optimal conditions, i.e. they are by an order of magnitude higher than originally published. A sensitivity analysis shows the dominant influence of the estimated thickness of the diffusional boundary layer around the fibre on the concentration predicted. Empirical modification of the model equation for this parameter yields satisfactory results under the conditions tested for both BTEX and the selected chlorobenzenes.     

A LabVIEW-based real-time measurement system for polarization detection and calibration

A rapid real-time polarization measurement system was designed and implemented in this paper. The system is centered round a computer running application developed for the purpose. The paper illustrates how to build such an excellent application with National Instruments’ graphical programming language LabVIEW, a synchronized high speed multi-channels data acquisition card and some photoelectric conversion module in detail. With simple and friendly user interface, the experimental result shows that the measurement system has high computational efficiency, high precision calibration matrix, which can be efficiently utilized in experiments relating to the measurement of polarization.     

冰冻人血清中尿酸标准物质复制的定值EI北大核心CSCD

为了满足该标准物质的需求,进行了第二次尿酸血清标准物质的复制。针对复制的尿酸血清标准物质,基于单四极杆质谱的液相色谱-同位素稀释质谱法(LC-IDMS),用乙腈沉淀法去除蛋白质,BEH C18色谱柱和电喷雾离子源负离子模式(ESI^(-)),同位素稀释的单点校准法进行定值、均匀性检验、稳定性检验以及不确定度评定等研究。此定值方法经过CCQM-K109(血清中尿酸分析)国际关键比对进行验证。复制的2种不同浓度水平尿酸(肾病患者和正常人)血清标准物质的定值结果分别为(73.5±1.3)μg/g,(47.5±1.1)μg/g,其均匀性和稳定性评估结果良好。     

General expression of the calibration curve for the CR-39 radon track detectors

The CR-39 detectors are widely used as passive radon dosimeters, as well as in physics laboratories or for industrial applications. For what concerns radon monitoring, the calibration curve which is usually adopted corresponds to a linear relation between the actual etched track density and the track density counted by an automatic acquisition system. This linear calibration provides very accurate radon exposure assessments in a restricted range of etched track density, however it neglects the effect of the tracks overlapping that becomes as relevant as the track density increases. In the present work the mathematical expression of the area covered by a set of uniformly distributed tracks is deduced. This result allows then to infer the probability that the system acquires the right track density, providing a general calibration curve for a solid state radon track detector. The process of track production and reading routine is also simulated adopting a Monte Carlo approach, showing that the obtained results are in agreement with the function proposed as calibration curve. Moreover, a linear dependence between the track average area and the rate parameter of the calibration curve has been observed. Finally a semi-empirical correlation based on the previous results is proposed.     

Localization microscopy (SPDM) facilitates high precision control of lithographically produced nanostructures

Nanoscale resolution in material sciences is usually restricted to scanning electron beam microscopes. Here we present a procedure that allows single molecule resolution of the sample surface with visible light. Highlighting the performance we used electron beam lithography to generate highly regular nanostructures consisting of interconnected cubes. The samples were labeled with Alexa 647 dyes. The spatial organization of the dyes on nanostructured surfaces was localized with single molecule resolution using localization microscopy. This succeeded also in an absolute spatial calibration of the localization method applied (spectral precision distance microscopy/SPDM). The findings will contribute to the field of product control for industrial applications and long-term fluorescence imaging.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.     

模型传递用于解析遥感傅里叶变换红外谱图

基于模型传递的原理,建立了一种可对存在背景干扰,谱峰严重混叠的遥感傅里叶变换红外(remote sensing Fourier transform infrared: RS-FTIR)谱图进行解析的方法。分别用4组分气体混合物的EPA红外标准谱图和RS-FTIR谱图,建立校正和预测模型,经过正交信号校正(OSC)处理后,用EPA红外谱图数据所建立的校正模型,对RS-FTIR谱图数据进行预测,得到的丙酮、甲醇、苯和三氯甲烷的均方根预测误差(RMSEP)分别为：0.008 5,0.018 0,0.064 0,0.002 8。未经OSC处理时的RMSEP依次是0.085 6,0.047 9,1.065 3,0.014 2。经优化,支集选择的方法为Kennard-Stone法,OSC在实现过程中循环次数为3时得到的预测结果最好。研究结果表明,该方法能够克服背景和校正模型给RS-FTIR监测大气污染物带来的制约。     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.