An Oscillation Condition for an Electrode－separated Piezoelectric Sensor in Non－electrolyte Liquid

ＡｎＯｓｃｉｌｌａｔｉｏｎＣｏｎｄｉｔｉｏｎｆｏｒａｎＥｌｅｃｔｒｏｄｅ－ｓｅｐａｒａｔｅｄＰｉｅｚｏｅｌｅｃｔｒｉｃＳｅｎｓｏｒｉｎＮｏｎ－ｅｌｅｃｔｒｏｌｙｔｅＬｉｑｕｉｄＳＨＥＮＤａ－ｚｈｏｎｇ，ＨＵＡＮＧＭｉｎｇ－ｓｈａｎ，ＬＩＮＳｏｎｇ，Ｎ...     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

Dimerization of some substituted benzoic acids in aqueous solution from conductance measurements

Precision molar conductances of benzoic, o-toluic, 2,6-dimethylbenzoic, 2,3,6-trimethylbenzoic, and, o-fluorobenzoic acids have been determined in aqueous solution as a function of temperature and of concentration up to near saturation (<0.035 M). At the higher concentrations molar conductances are found to be less than anticipated for the simple dissociation of a 1-1 electrolyte. Although the deviations are only 1% or less they have been interpreted to show that these acids are dimerized in solution. The interpretation includes an assumption that the dimer ionizes to produce a triple ion. Increasing numbers of methyl groups lead to increasing dimerization. For those acids with two ortho groups the dimerization increases with increasing temperature while the other three show decreasing dimerization with increasing temperature. Temperature functions have been determined for the dimerization constants and from these functions standard changes in enthalpy, entropy, and heat capacity have been determined. Comparisons are made with dimerization studies in non-aqueous solvents. From these as well as the behavior of benzene in water it is concluded that a major factor driving the dimerization is hydrophobic interaction. To provide a limiting conductance of the triple ion needed in the dimerization calculations a conductance study was also made for o-Phenylbenzoic acid on the assumption that its anion provides an approximate model of the triple ion.     

植物胞外钙调素与拮抗剂W7-Agarose结合作用的荧光光谱法研究

W 7-agarose是常用的细胞外CaM功能的拮抗剂,本实验采用荧光光谱法研究了水溶液中钙调素拮抗剂W 7-agarose与植物胞外钙调素的相互结合反应。W 7-agarose是一种将W 7-共价连接到颗粒型agarose(琼脂糖)的粒子。W 7-agarose颗粒较大且容易沉淀,静置5m in后,溶液中的荧光强度完全由游离的CaM产生。在溶液中加入W 7-agarose后,溶液中一部分CaM与其结合后沉降至荧光比色皿底部,导致溶液中CaM的荧光强度下降。由此可以确定溶液中游离CaM的浓度。根据公式lg{[Q]t(F0-F)/F0}=nlg{[Q]tF/F0} lgnK[B]t,从而计算出配位体系的结合常数和配比。研究表明:二者以摩尔比1∶1结合,其平衡常数为4.9×105。由此进一步计算了W 7-agarose对胞外钙调素的拮抗率,在拮抗剂W 7-agarose浓度达到15~20μmol/L时,拮抗率可达到90%以上,与文献报道的生物学体内实验结果一致,从分子水平上解释了W 7-agarose与CaM的结合作用。     

高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

介质对配合物稳定性的影响——Ⅱ.Cu(SCN)+—NaNO3—二氧六环—水体系

本文用分光光度法确定了25℃时配阳离子Cu(SCN)~+在NaNO_3—二氧六环—H_2O介质中的稳定常数。溶剂组成变化范围为0,5,10,15和20wt％二氧六环,离子强度范围为0.2～3.0moledm~(-3),溶液的pH=1.5～1.6。本文提出了基于Pitzer方程式的最小二乘多项式逼近法,确定出各种不同组成混合溶剂中配合物的热力学稳定常数。讨论了该常数和一级介质效应与溶剂组成和介电常数的关系。     

ANN原子参数法预报合金相晶型及晶格常数

运用人工神经网络方法，以二元合金组成元素的电子结构为基本特征，对二元合金相晶型作了区分，进一步对其晶格常数作了预报，结果令人满意。