互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

The effect of ionizing radiation on microbiological decontamination of medical herbs and biologically active compounds

Several thousand tons of medical herbs are produced annually by pharmaceutical industry in Poland. This product should be of highest quality and microbial purity. Recently, chemical methods of decontamination are recognized as less safe, thus irradiation technique was chosen to replace them in use. In the Institute of Nuclear Chemistry and Technology the national program on the application of irradiation to the decontamination of medical herbs is in progress now. The purpose of the program is to elaborate, on the basis of research work, the facility standards and technological instructions indispensable for the practice of radiation technology.     

The photoluminescence of Co-Al-layered double hydroxide

We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH).It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated.Its excitation spectrum shows a maximum peak near the wavelength 370nm,the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue.This new optical property will be expected to extend the potential applications of LDHs in optical materials field.     

Spectral studies on VO ions in potassium thiourea bromide single crystals using EPR and optical absorption spectroscopy

Electron paramagnetic resonance (EPR) studies have been carried out on VO²⁺ ions doped in single crystals of ferroelectric material, potassium thiourea bromide (PTB) at room temperature and in the temperature range 103–343 K on X-band MW frequency. An isotropic octet spectrum characteristic of VO²⁺ ion was obtained due to the fast re-orientation of the VO²⁺ in PTB lattice, which exhibits glassy nature at certain range around room temperature. The temperature dependant EPR spectra of VO²⁺ ions in this host lattice has been attributed to the occurrence of multiple phase transitions due to the combined environment effects of KBr and thiourea materials in the single crystal. From the optical absorption spectrum, the crystal field splitting parameter Dq, tetragonal parameters Ds and Dt have been evaluated and discussed.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins

Highly protein-resistant, self-assembled monolayers (SAMs) of dendritic polyglycerols (PGs) on gold can easily be obtained by simple chemical modification of these readily available polymers with a surface-active disulfide linker group. Several disulfide-functionalized PGs were synthesized by N,N'-dicyclohexylcarbodiimide-mediated ester coupling of thioctic acid. Monolayers of the disulfide-functionalized PG derivatives spontaneously form on a semitransparent gold surface and effectively prevent the adsorption of proteins, as demonstrated by surface plasmon resonance (SPR) kinetic measurements. A structure-activity relationship relating the polymer architecture to its ability to effectuate protein resistance has been derived from results of different surface characterization techniques (SPR, attenuated total reflectance infrared (ATR-IR), and contact-angle measurements). Dendritic PGs combine the characteristic structural features of several highly protein-resistant surfaces: a highly flexible aliphatic polyether, hydrophilic surface groups, and a highly branched architecture. PG monolayers are as protein resistant as poly(ethylene glycol) (PEG) SAMs and are significantly better than dextran-coated surfaces, which are currently used as the background for SPR spectroscopy. Due to the higher thermal and oxidative stability of the bulk PG as compared to the PEG and the easy accessibility of these materials, dendritic polyglycerols are novel and promising candidates as surface coatings for biomedical applications.     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Crystal structure of Mg0.65Sc0.35Dx deuterides studied by X-ray and neutron powder diffraction

The structural properties of the Mg_0.65Sc_0.35D_x deuterides have been investigated by X-ray and neutron powder diffraction at different deuterium content (0?x?2.2 D/f.u.). The metallic phase adopts a pseudo-CsCl structure (Pm-3m space group (SG); a=3.5921(2) Å) that transforms upon hydrogenation into a face centered cubic (FCC) phase involving an elongation of the c-axis, a shrinkage of the a-axis and a re-ordering of the metallic atoms. The fully hydrided compound (2.2 D/f.u.) adopts a cubic structure (Fm-3m SG; a=4.8087(7) Å) and deuterium is located in fully occupied tetrahedral sites and partially filled (24%) octahedral sites. Upon desorption, a two-phase domain appears with coexistence of a hydrogen-rich (1.55 D/f.u.) and a hydrogen-poor (0.85 D/f.u.) phase (Fm-3m SG; a=4.7598(3) and 4.6936(3) Å, respectively). All deuterium atoms are located in the tetrahedral sites with different occupancy factors: 77% for the H-rich phase and 43% for the H-poor phase. The appearance of a plateau in the pressure-composition-isotherm curve measured at 573 K confirms this two-phase behavior. The structural properties of the Mg_0.65Sc_0.35D_x system are discussed and compared with other body centered cubic (BCC) alloys adopting the same structure.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

表面改性对CeO2纳米粉体特性的影响

研究了表面改性对CeO2纳米粉体特性的影响，采用表面活性剂．十二烷基硫酸钠对CeO2粉末颗粒表面进行了改性。未改性和改性的纳米氧化铈用粉体综合性能测试仪、激光粒度仪、比表面积测试仪、X射线仪、扫描电子显微镜进行了表征。结果表明，用十二烷基硫酸钠表面改性能提高纳米氧化铈的流动性和分散性，减小比表面积和团聚，同时也对CeO2粉体颗粒表面改性的机制进行了探讨。