n—型聚乙炔复合膜电极性能的研究

自MacDiarmid等将聚乙炔(PA)做为二次电池的电极材料以来,其电化学特性和行为引起了人们的极大兴趣.随后的研究表明,p-型PA[(CH)~(y )Ay~-]_x在电解液中不稳定,用ClO_4~-掺杂的PA充放循环时有降解发生.n-型PA[My~ (CH)~(y-)]_x(y≤0.10)在THF/LiClO_4电解质中较稳定,电化学还原完全可逆,目前已实现1100次充放循环.因此,它既可做电池的正极材料(碱金属为负极),又可做负极材料(TiS_2为正极).我们发现     

纳派林类二萜生物碱研究

纳派林类化合物是一类重要的二萜生物碱,本文概述了此类化合物的化学结构,波谱特征及某些化学反应,着重介纠~1H慢~13C NMR 的特征。并列表说明所有已知的天然存在的纳派林类化合物的结构、理化性质及植物来源等。     

Dual emission of singlet and triplet states boost the sensitivity of pressure-sensing

Pressure-related sensing materials in mechanochromic luminescent materials have received wide attention. However, at present, most piezochromic luminescence (PCL) materials have problems such as aggregation-caused quenching (ACQ) effect due to the presence of powder form, complicated preparation methods and fluorescence quenching effect under high pressure. To solve these problems, we employ three components containing carbon dots (CDs), layered double hydroxides (LDHs) and polyvinyl alcohol (PVA) to construct the CDs-LDHs/PVA film. The LDHs can provide a rigid environment for CDs and improve the luminescent efficiency of CDs. The film shows high sensitivity, stability and reversibility. Moreover, the compressed film can recover to its original state by heating. Therefore, the PCL film with dual emission (fluorescence and phosphorescence) characteristic is constructed, which boosts the sensitivity of pressure-sensing.     

New polymer electrolyte membrane for medium-temperature fuel cell applications based on cross-linked polyimide Matrimid and hydrophobic protic ionic liquid

New hydrophobic protic ionic liquid, 2-butylaminoimidazolinium bis(trifluoromethylsulfonyl)imide (BAIM-TFSI), has been synthesized. The ionic liquid showed good thermal stability to at least 350 °C. The conductivity of BAIM-TFSI determined by electrochemical impedance method was found to be 5.6 × 10^?2 S/cm at 140 °C. Homogeneous composite films based on commercial polyimide (PI) Matrimid and BAIM-TFSI containing 30–60 wt% of ionic liquid were prepared by casting from methylene chloride solutions. Thermogravimetric analysis data indicated an excellent thermal stability of PI/BAIM-TFSI composites and thermal degradation points in the temperature range 377 °C–397 °C. The addition of ionic liquid up to 50 wt% in PI films does not lead to any significant deterioration of the tensile strength of the polymer. The dynamic mechanical analysis results indicated both an increase of storage modulus E′ of PI/BAIM-TFSI composites at room temperature and a significant E′ decrease with temperature compared with the neat polymer. The cross-linking of the PI with polyetheramine Jeffamine D-400 allowed to prepare PI/Jeffamine/BAIM-TFSI (50%) membrane with E′ value of 300 MPa at 130 °C. The ionic conductivity of this cross-linked composite membrane reached the level of 10^?2 S/cm at 130 °C, suggesting, therefore, its potential use in medium-temperature fuel cells operating in water-free conditions.     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

第一性原理研究MgZn2相的电子结构及磁性质

运用密度泛函理论的第一性原理计算分析了MgZn₂相的电子结构及相关磁性质。能带结构和态密度分析表明Zn4s和Zn4p轨道、Mg3s和Mg3p轨道分别发生sp态杂化,然后杂化态之间相互作用而形成Zn-Mg键;Mulliken布居分布计算显示:Zn₁-Mg(Zn₁是处于晶格边缘的Zn原子)和Zn₂-Mg(Zn₂是处于晶格内部的Zn原子)电子云重叠布居数接近0,电子密度分析显示Zn-Mg之间电子密度分布具有明显的定域性。结合上述结果与Zn、Mg原子的电负性差异,确定Zn-Mg键为极性共价键。分态密度(PDOS)分析显示,Zn₁-Mg键和Zn₂-Mg键的差异主要表现在Zn₂4s轨道在-10~-6 eV区域对成键的贡献度高于Zn₁4s轨道,而Zn₁4s轨道在2~5 eV区域对成键的贡献度高于Zn₂4s轨道。进一步对MgZn₂的积分自旋态密度和磁矩计算表明:MgZn₂磁性质表现为顺磁性,其磁性主要来源于Zn₁-Mg键中的2个自旋相同的未配对电子;MgZn₂的顺磁性特性将使Al-Zn-Mg-Cu(7xxx系)高强铝合金产生磁致塑性效应。     

基于一种柔性二羧酸和不同双咪唑配体构筑的两例钴-穿插网格

利用一种柔性二羧酸,辅以不同的双咪唑配体在水热条件下构筑了两例具有穿插特征的钴配位聚合物,{[Co(bimb)(L)]·H₂O}_n(1)和{[Co(bbix)(L)]₂}_n(2)(H₂L=4,4'-(2,2'-oxybis(ethane-2,1-diyl)bis(oxy))dibenzoic acid, bimb=1,1'-(1,4-butanediyl)bis(imidazole), bbix=1,4-bis(benzimidazole-1-ylmethyl)-benzene)。单晶X-射线衍射研究发现配合物1为2D→3D 4-连sql拓扑构型的三重穿插网格;配合物2为3D 4-连6⁶ dia拓扑构型的六重穿插网格。该结构分析结果表明作为辅助配体的双咪唑配体的构型对配合物的穿插特征有重要影响。另外,我们还研究了配合物1和2的热稳定性及磁性。     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

Comparison of an antibody and its recombinant derivative for the detection of the small molecule explosive 2,4,6-trinitrotoluene

Antibodies are commonly used as recognition elements in immunoassays because of their high specificity and affinity, and have seen extensive use in competitive assays for the detection of small molecules. However, these complex molecules require production either in animals or by mammalian cell cultures, and are not easily tailored through genetic manipulation. Single chain antibodies (scFv), recombinantly expressed molecules consisting of only the antibody's binding region joined via a linking peptide, can provide an alternative to intact antibodies. We describe the characterization of a new monoclonal antibody (mAb), 2G5B5, able to detect the small molecule explosive 2,4,6-trinitrotoluene (TNT) and the scFv derived from its variable regions. The mAb and scFv were tested by surface plasmon resonance to determine their affinity for an immobilized TNT surrogate; dissociation constants were determined to be 1.5 × 10⁻¹³ M and 4.8 × 10⁻¹⁰ M respectively. Circular dichroism was used to determine their melting temperatures. The mAb is more stable melting at ∼75 °C while the scFv melts at ∼65 °C. The recognition elements were incorporated into a competitive assay format using a bead-based multiplexing platform to examine their sensitivity and specificity. The scFv was able to detect TNT ∼10-fold more sensitively than the mAb in this assay format, allowing detection of TNT concentrations down to at least 1 μg L⁻¹. The 2G5B gave similar detection limits to a commercial anti-TNT mAb, but was less specific, recognizing 1,3,5-trinitrobenzene (TNB) equally well as TNT.     

One-step synthesis of agarose coated magnetic nanoparticles and their application in the solid phase extraction of Pd(II) using a new magnetic field agitation device

A magnetic solid phase extraction method based on agarose coated magnetic nanoparticles)ACMNPs(coupled to a new magnetic field agitation (MFA) device was developed and investigated for the separation, preconcentration and determination of Pd(II) in aqueous solutions. For the first time, the formation of the nanoparticles and their encapsulation in agarose micro-flakes was conducted in a single step. For this purpose, preparation of the magnetic iron oxide nanoparticles was performed in an alkaline agarose solution. The sizes of Fe₃O₄ nanoparticles and agarose micro-flakes were 10–14 nm and 90–130 μm, respectively. The nanomagnetic agarose particles were functionalized by iminodiacetic acid and subjected to magnetic field agitation in the MFA device. The influence of different analytical parameters such as pH, ionic strength, type and volume of desorption solvent and amount of the adsorbent on the preconcentration of Pd(II) were investigated. Eight replicated analysis at the optimized conditions, resulted in a recovery of 94.1% with an RSD of 5.2% for Pd(II). The detection limit of the method (3σ) was 47 ng L⁻¹ for the analyte. The method was successfully applied to the determination of Pd(II) in natural water samples.