Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

H4SiW12O40/乙烯-乙烯醇共聚物复合纳米纤维膜的制备及光催化性能

利用静电纺丝技术制备了H₄SiW₁₂O₄₀(SiW₁₂)/乙烯-乙烯醇共聚物(EVOH)复合纳米纤维膜. X射线能谱(EDX)和红外光谱(IR)表征结果表明, SiW₁₂负载到EVOH纤维膜中, 且其Keggin结构完好无损. SiW₁₂/EVOH复合纳米纤维膜在氙灯光源照射下对甲基橙(MO)表现出优异的光催化活性. 当EVOH与SiW₁₂的质量比为2:1时, MO降解率可达96.3%. 复合纳米纤维膜优异的光催化活性主要归于EVOH与SiW₁₂的协同相互作用. 复合纤维膜具有良好的可重复使用性, 循环使用3次后, 其光催化活性没有明显下降. 因此, SiW₁₂/EVOH复合纳米纤维膜在去除废水中有机染料方面具有广阔的应用前景.     

纳米木质素/二氧化硅基微胶囊的制备及在自愈合涂层中的应用

利用磷酸化改性木质素/二氧化硅复合纳米颗粒(PAL/SiO₂)作为壁材包埋活性组分异佛尔酮二异氰酸酯(IPDI)制备微胶囊(PAL/SiO₂-IPDI). 通过加入少量反应活性更高的聚合多甲基多二异氰酸酯(PMDI), 与水反应形成聚脲, 以增加微胶囊的壁厚. 采用光学显微镜、 扫描电子显微镜(SEM)和激光粒度分析仪(DLS)研究了PAL/SiO₂复合纳米粒子掺杂量, 水油比和剪切速率对微胶囊表面形貌、 粒径和壁厚的影响. 结果表明, 所制备的微胶囊呈现规整球形, 壁厚为2.36~3.50 μm, 平均粒径为40.3~201.5 μm. IPDI作为芯材包埋在微胶囊中, 芯材含量约为82.8%. 将制备的PAL/SiO₂-IPDI微胶囊添加到环氧树脂中得到自愈合环氧树脂涂层. 其在高盐浓度溶液中的抗侵蚀测试结果显示, 添加质量分数4%的PAL/SiO₂-IPDI微胶囊的环氧树脂涂层在划破后能够快速愈合, 显著降低基底的腐蚀电流和腐蚀速率. 纳米压痕实验表明, 环氧涂层的硬度为249.99 MPa, 而添加PAL/SiO₂-IPDI微胶囊后硬度增加到302.98 MPa, 弹性模量也有提高.     

铅笔芯修饰聚苯胺制作微型复合pH电极的性能

在0.3mm直径的铅笔芯上电修饰聚苯胺,封入玻璃毛细管中,并与Ag/AgCl电极组合成复合微型pH电极.经实验测试,该电极的pH响应特性良好,在pH1～11的线性范围内,能斯特斜率为(-56.4±0.5)mV/pH,线性相关系数不小于0.996.作为参比的Ag/AgCl电极性能稳定.由于电极是复合微型化的,所以可用于活体微区测定.     

酞菁氧钛/卟啉氧钒复合体系光导性能的协同增强效应

在酞菁氧钛（TiOPc)／卟啉氧钒（VOTPP）复合光生材料中发现了光敏性的非线性增强现象，对复合体系的电子跃迁光谱和X射线衍射图的研究结果表明，在基态下两种材料之间没有明显相互作用，光致放电研究说明，该现象来自光激发状态下复合体系中的隙间态跃迁对光导的贡献，XPS测试结果表明酞菁氧钛与卟啉氧钒分子之间存在着定向的部分电荷转移，光致激发状态下的电荷转移是协同增强效应的起因，这种协同增强效应为利用弱的电子给体与弱的受体复合体系设计新型光导材料与器件提供了新方法。     

参数法和非参数法估计组合样中被测组分含量的置信区间

本文以散装生铁块的随机样本分析结果为基础,应用Ｍｏｎｔｅ Ｃａｒｌｏ模拟法考察了组合样本中Ｓｉ、Ｍｎ,Ｃ,Ｓ,Ｐ含量（或份样平均值）的分布情况,研究了组分含量的置信区间,对参数法和非参数法的结果进行了比较。结果表明,对近似符合正态分布的原始总体或当组合样中的份样数目较多时,两种方法所估计的置信区间相近。但对偏离正态分布（或ｔ－分布）的总体且组合样中的份样数目较少时,非参数法较参数法的结果更符合实际     

PREPARATION AND CHARACTERIZATION OF ION EXCHANGE MEMBRANES BASED ON POLYVINYLIDENE FLUORIDE

 A new ion exchange membrane based on polyvinylidene fluoride (PVDF) and sulfonated poly(styrene- divinylbenzene) was prepared by in-situ polymerization. The incorporation of sulfonic groups into the polyvinylidene fluoride composite membrane was confirmed by infrared spectroscopy (IR), ion exchange capacity (IEC) and energy dispersive X-ray analysis (EDAX). Area resistance, IEC and water uptake of the treated membrane were evaluated. When 20% of the crosslinked membrane was sulfonated at 80°C for 22 h, the PVDF ion exchange membrane can attain 0.8 Ω·cm²area resistance in NaCl aqueous solution at 25℃, IEC is as high as 2.43 millimoles per gram of the wet membrane. The hydrophilicity of PVDF membrane is also significantly improved after treatment. When 60% of crosslinked membrane was sulfonated at 80 ℃ for 6 h, water uptake of the treated membrane can attain 64.7%.     

基于有机磷酸类MOFs前驱体制备Ni2P/C复合材料

以镍为金属中心、 对二甲苯二磷酸为有机配体, 构筑了一种有机磷酸类Ni-MOF前驱体, 再经过一步碳化, 原位制备出多孔碳包覆Ni₂P纳米颗粒的复合材料. 该复合材料保留了前驱体的片状形貌, 比表面积可达202 m²/g, 复合材料中的Ni₂P纳米颗粒具有良好的结晶度, 颗粒均匀且无团聚现象. 在锂离子电池性能测试中, 该Ni₂P/C复合结构在缓解材料体积膨胀的同时提高了材料的电子和离子电导率, 进而提高了材料的电化学性能. 在0.2 C的电流密度下, 材料首次充、 放电比容量分别为247和226 mA·h·g^-1, 库仑效率可达91.7%, 循环200圈后, 库仑效率接近100%.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.