铅笔芯修饰聚苯胺制作微型复合pH电极的性能

在0.3mm直径的铅笔芯上电修饰聚苯胺,封入玻璃毛细管中,并与Ag/AgCl电极组合成复合微型pH电极.经实验测试,该电极的pH响应特性良好,在pH1～11的线性范围内,能斯特斜率为(-56.4±0.5)mV/pH,线性相关系数不小于0.996.作为参比的Ag/AgCl电极性能稳定.由于电极是复合微型化的,所以可用于活体微区测定.     

聚苯胺导电复合物二次掺杂的基材效应

对十二烷基苯磺酸掺杂的聚苯胺与氯磺化聚乙烯或苯乙烯－丁二烯－苯乙烯三嵌段共聚物形成的复合物的二次掺杂进行了研究。二次掺杂的复合膜经反掺杂后的ＵＶ－Ｖｉｓ吸收光谱在５８０￣８００ｎｍ处呈现宽的吸收，证实了二次掺杂后ＰＡｎ主链的展开，同时表明ＰＡｎ在ＣＳＰＥ中的展开较在ＳＢＳ中更充分，ＥＳＲ动态测试表明二次掺杂诱导主链的载流子间相互作用有２种方式；ＰＡｎ／ＣＳＰＥ中的单极化子转变为双极化子；ＰＡｎ／Ｓ     

Electrodeposition of fluorine-doped lead dioxide

The electrocatalytic properties of PbO₂ may be increased by incorporation of some ions such as F⁻. In this review, the preparation of fluorine-doped PbO₂ in the presence of some additives of fluorine-containing compounds (F⁻, potassium salt of nonafluoro-1-butanesulfonic acid C₄F₉O₃SK and Nafion^®) is reported. The mechanism of electrodeposition is discussed. The amount of additives in the deposit depends on the experimental conditions: potential, current density and charge of additive species in the plating solution. The physicochemical properties of doped oxide are very different from those of undoped oxide, accounting for the different electrocatalytic activity of the materials.     

Simultaneous deposition of Ni nanoparticles and wires on a tubular halloysite template: A novel metallized ceramic microstructure

Tubular halloysite can be used as a template to fabricate a novel metallized ceramic microstructure through electroless plating. Reduction of Pd ions by methanol is conducted to initiate Ni plating. There is a simultaneous deposition of Ni nanoparticles on the outer surface and discontinuous wires in the lumen site of the halloysite template obtained. The different deposition could be caused by the different composition distribution of ferric oxide impurity in the wall due to the isomorphic substitution during the formation of halloysite template. Its magnetic property is mainly attributed to the Ni nanoparticles, not the wires. The metallized ceramic microstructure has the potential to be utilized as a novel magnetic material.     

Synthesis of temperature-sensitive micron-sized monodispersed composite polymer particles and its application as a carrier for biomolecules

 Temperature-sensitive micron-sized monodispersed composite polymer particles were prepared by seeded copolymerization of dimethylaminoethyl methacrylate and ethylene glycol dimethacrylate with 1.77 μm-sized monodispersed polystyrene seed particles. The change in surface property at temperature above and below 35 °C was examined by differential scanning calorimetry, trypsin activity and the adsorption/ desorption behaviors of low molecular weight cationic emulsifier as well as biomolecules. Received: 6 August 1997 Accepted: 16 January 1998     

计算单向复合材料弹性模量的新公式

根据复合材料单层的实际构造，提出了串并联组合模型，采用微观力学与宏观力学相结合的方法，推导出一组计算单向复合材料弹性模量的新公式。其优点是：Ｅ１和ｖ（１２）、Ｅ２和Ｇ（１２）的计算式形式对称，结构简单，计算容易，物理意义明确。我们把由世界上许多著名学者提出的多组预测公式和本文导出式计算所得的结果与国内外已发表的硼／环氧、碳／环氧、玻璃／环氧复合材料的实验数据相比较，结果表明：导出式比其他公式精确、更有价值，可供二程设计使用。     

硅藻土增强橡胶复合材料的研究进展

硅藻土是单细胞硅藻的遗骸经自然条件形成的硅质沉积岩,因其具有质轻、大的比表面积、超强的吸附性、隔音、耐磨、耐热以及耐腐蚀等特点而被广泛应用于化工、石油、建材、生物医药卫生以及环保等众多领域。然而由于硅藻土与白炭黑的结构成分相似,白炭黑通常用作橡胶的补强填料,目前硅藻土用于橡胶补强填料的研究鲜少报道。本文综述了硅藻土的性能、硅藻土的国内外研究现状、硅藻土的改性以及硅藻土增强橡胶复合材料的制备过程,并对硅藻土增强橡胶复合材料的发展趋势做了展望。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

Fabrication and Properties of Conducting Polypyrrole/SWNT‐PABS Composite Films and Nanotubes

We report the electropolymerization and characterization of polypyrrole films doped with poly(m‐aminobenzene sulfonic acid (PABS) functionalized single‐walled nanotubes (SWNT) (PPy/SWNT‐PABS). The negatively charged water‐soluble SWNT‐PABS served as anionic dopant during the electropolymerization to synthesize PPy/SWNT‐PABS composite films. The synthetic, morphological and electrical properties of PPy/SWNT‐PABS films and chloride doped polypyrrole (PPy/Cl) films were compared. Characterization was performed by cyclic voltammetry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Raman spectroscopy. SEM and AFM images revealed that the incorporation of SWNT‐PABS significantly altered the morphology of the PPy. Cyclic voltammetry showed improved electrochemical properties of PPy/SWNT‐PABS films as compared to PPy/Cl films. Raman Spectroscopy confirmed the presence of SWNT‐PABS within composite films. Field effect transistor (FET) and electrical characterization studies show that the incorporation of the SWNT‐PABS increased the electronic performance of PPy/SWNT‐PABS films when compared to PPy/Cl films. Finally, we fabricated PPy/SWNT‐PABS nanotubes which may lead to potential applications to sensors and other electronic devices.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.