Melt-casting of Si-Al-Y-O glasses and glass-ceramics by combustion synthesis under high gravity

Si-Al-Y-O glasses and glass-ceramics were prepared via melt-casting by combustion synthesis under high gravity. The phase assemblage and microstructure of the cast products strongly depended on the content of SiO₂ and the additive ZrO₂ or La₂O₃ in the starting compositions. With increasing content of SiO₂, the glass-forming ability of the melt was enhanced. The additive ZrO₂ was not dissolved into the glass and inclined to crystallize, but La₂O₃ was inclined to remain in the glass matrix instead of precipitation. With a short processing period and lower energy consumption, combustion synthesis under high gravity can offer a new approach to fast fabrication of glass and glass-ceramic materials.     

Synthesis of nano-size BaMgAl10O17:Eu blue phosphor by a rapid exothermic reaction

Ultrafine particles of BaMgAl₁₀O₁₇:Eu²⁺ (BAM) phosphor were synthesized by a solid-state combustion reaction in a powder bed of 0.9BaCO₃+MgO+5Al₂O₃+0.05Eu₂O₃+k(KClO₃+1.5C) composition. A large exothermic reaction of the mixture (KClO₃+1.5C) leads to a self-sustaining combustion mode. Under optimized combustion conditions, the product consisted of BAM powder and KCl was obtained. BAM ultrafine particles resulting from the combustion process were easily obtained by simply washing the salt by-product with water. Combustion-processed BAM phosphor shows a homogeneous grain size of 100-500 nm, good dispersity, regular morphology, and improved luminescence properties.     

奶制品热值测定

利用WZR-1A型精密微电脑量热计系统地测量了8种奶制品的恒容燃烧热.准确称取一定量的基准物质,放入氧弹中充入高压纯氧,将测试样品在氧弹中完全燃烧,并记录燃烧前后时间与量热计温度变化数据,利用仪器自带的数据处理软件计算出仪器热容量,然后再准确称取一定量的奶制品,装入已准确测定热值的燃烧胶囊中后,将测试数据用自编的计算机处理程序对测试数据处理,从而得到奶制品的燃烧热值.此法准确、简便、实用,可用于日常检测工作.     

高碳烃宽温度范围燃烧机理构建及动力学模拟

发动机中燃料点火特性以及燃烧能量的释放对于发动机设计具有非常重要的作用,为了提高燃料的燃烧效率以及减少燃料在燃烧过程中污染物的排放,基于反应动力学机理对燃料燃烧过程的模拟就显得十分必要。因此需要更加深入的认识碳氢燃料的燃烧机理,探索其在燃烧过程中十分复杂的化学反应网络。为了发展能够适用于实际燃料多工况条件(宽温度范围、宽压力范围和不同当量比)燃烧的燃烧机理,基于碳氢燃料机理自动生成程序ReaxGen构建了正癸烷燃烧详细机理(包含1499个物种,5713步反应)和正十一烷燃烧详细机理(包含1843个物种,6993步反应)。详细机理主要由小分子核心机理和高碳烃类(C5以上)机理两部分组成。为了验证机理的合理性与可靠性,本文对于高碳烃燃烧新机理在点火延时时间以及物种浓度曲线进行了动力学分析,并与实验数据及国内外同类机理进行了对比,结果表明本文提出的正癸烷和正十一烷燃烧新机理在比较宽泛的温度、压力和当量比条件下都具有较高的模拟精度,为发展精确航空煤油燃烧模型提供了基础数据。同时考虑到详细机理的复杂性以及机理分析的计算量大和时耗长,本文基于误差传播的直接关系图形(Directed Relation Graph with Error Propagation,DRGEP)方法简化得到的包含709组分2793反应的正癸烷和包含820组分3115反应的正十一烷简化机理,使用DRGEP方法时所采用的数据点选自压力范围从1.0×10~5 Pa到1.0×10~6Pa,当量比范围从0.5到2.0,初始温度范围从600到1400时恒压点火的模拟结果在点火延迟时间附近区域的抽样,同时在正癸烷机理简化中选取正癸烷、O_2和N_2作为初始预选组分,正十一烷的机理简化中主要选取正十一烷、O_2和N_2作为初始预选组分,得到的简化机理在比较宽泛的条件下的预测结果与详细机理吻合很好。最后结合敏感度分析方法分析了正癸烷和正十一烷的点火延迟敏感性,考察了机理中影响点火的关键反应。结果表明:这些机理能够合理描述正癸烷和正十一烷的自点火特性,在工程计算流体力学仿真设计中有很好的应用前景。     

Classical solution for a nonlinear hybrid system modeling combustion in a multilayer porous medium

Combustion processes in porous media have been used by the petroleum engineering industry to extract heavy oil from reservoirs. This study focuses on a one-dimensional nonlinear hybrid system consisting of $n$ reaction–diffusion–convection equations coupled with $n$ ordinary differential equations, which models a combustion front moving through a porous medium with $n$ parallel layers. The state variables are the temperature and fuel concentration in each layer. Coupling occurs in both the reaction function and differential operator coefficients. We prove the existence of a classical solution, first locally and then globally over time, to an initial and boundary value problem for the corresponding system. The proof uses a new approach for combustion problems in porous media. The local solution is obtained by defining an operator in a set of Hölder continuous functions and using Schauder’s fixed-point theorem to find a fixed point as the desired solution. Using Zorn’s lemma, we extend the local solution to a global solution, proving that the first-order spatial derivative of the temperature in each layer is a bounded function.     

Photocatalytic degradation of methyl methacrylate copolymers

The photolytic and photocatalytic degradation of the copolymers poly(methyl methacrylate-co-butyl methacrylate) (MMA-BMA), poly(methyl methacrylate-co-ethyl acrylate) (MMA-EA) and poly(methyl methacrylate-co-methacrylic acid) (MMA-MAA) have been carried out in solution in the presence of solution combustion synthesized TiO₂ (CS TiO₂) and commercial Degussa P-25 TiO₂ (DP 25). The degradation rates of the copolymers were compared with the respective homopolymers. The copolymers and the homopolymers degraded randomly along the chain. The degradation rate was determined using continuous distribution kinetics. For all the polymers, CS TiO₂ exhibited superior photo-activity compared to the uncatalysed and DP 25 systems, owing to its high surface hydroxyl content and high specific surface area. The time evolution of the hydroxyl and hydroperoxide stretching vibration in the Fourier transform-infrared (FT-IR) spectra of the copolymers indicated that the degradation rate follows the order MMA-MAA > MMA-EA > MMA-BMA. The same order is observed for the rate coefficients of photocatalytic degradation. The photodegradation rate coefficients were compared with the activation energy of pyrolytic degradation. In degradation by pyrolysis, it was observed that MMA-BMA was the least stable followed by MMA-EA and MMA-MAA. The observed contrast in the order of thermal stability compared to the photo-stability of these copolymers was attributed to the two different mechanisms governing the scission of the polymer and the evolution of the products.     

Role of crystallite size on the photoluminescence properties of SrIn2O4:Eu phosphor synthesized by different methods

Photoluminescence (PL) of Eu³⁺ was studied in SrIn₂O₄ host lattice. A complete solid solubility of Eu³⁺ has been found in the series SrIn_2−xEu_xO₄ [x=0-2.0]. The phase formation at a relatively low temperature and in a very short duration was achieved by combustion synthesis (CS). Concentration quenching of luminescence has been observed in SrIn_2−xEu_xO₄ [x=0.1-2.0] and the critical concentration for maximum emission was found to be with x=0.3. In order to find the role of crystallite size on the PL properties of SrIn₂O₄:Eu³⁺, the results obtained with phosphors synthesized by solid state reaction (SSR) and CS methods were compared.     

Multi-diagnostic approach to characterize the onset of formation of nanoparticles in a premixed laminar ethylene/air flame

The onset of formation of nanoparticles in a premixed laminar ethylene/air flame was studied using optical and non-optical diagnostic techniques. The optical techniques (Visible Imaging, Spectroscopic analysis of optical emission, Laser Induced Incandescence and Optical Extinction) were checked against the direct measurement of particles size distribution done with a commercial sampler. The diagnostic techniques were set up on a standard burner (McKenna). The combustion conditions were varied by tuning two experimental parameters: the equivalent ratio Φ and the cold gases velocity v. Values of Φ were investigated in the range 1.3 to 2.2, in combination with cold unburned gas velocities of 5, 7 and 10 cm/s. By varying the combustion conditions, a transition in the signal detected by the different techniques was observed. The transition was put in correspondence with the sensitivity of the given technique to the onset of the nanoparticles formation. A comparison of the sensitivity of the different techniques was performed.     

Synthesis of Nano‐Sized Zinc Oxide Photocatalyst by Combustion Method

The objective of this research was to use combustion synthesis to create a nano‐sized ZnO photocatalyst using citric acid as the fuel and zinc nitrate as the oxidant. The starting materials were mixed in a stoichiometric ratio, and a slurry precursor with high homogeneity was formed. The precursor was ignited at room temperature, resulting in dry, loose, and voluminous ZnO powders. The powders, characterized by SEM, TEM and XRD, showed a particle size range of 40 to 80 nm with a wurtzite structure. The ZnO powders were introduced as a photocatalyst for the degradation of methyl orange, which was adopted as a model compound. UV light (6W) was used as the irradiation source to induce synthesized ZnO powders to perform catalytic activity. The photocatalytic reaction was executed in 40 mL of a 10 ppm methyl orange aqueous solution under 254 nm UV illumination. In this work, it was observed that both UV light and ZnO powders are needed for the photocatalytic reaction. In addition, it was found that increasing the amount of ZnO powder present in the MO (methyl orange‐C₁₄H₁₄N₃NaO₃S) solution did not correlate directly with an increase in photocatalytic ability. It was found that the scattering problem of UV light also needs to be considered. The optimized photocatalytic degradation ratio in this work reached 92.7%.     

锂掺杂ZnO陶瓷靶材制备及其掺杂引起的缺陷

采用燃烧合成和放电等离子烧结方法制备锂掺杂ZnO陶瓷靶材. 利用XRD, SEM, TEM和激光粒径分析等手段分析合成粉体与陶瓷的显微结构. 结果表明, 锂掺杂ZnO粉体与陶瓷均为纤锌矿结构, 无其他相存在; 粉体的粒径分布为0.18-1.7 μm, 烧结体致密度较高, 晶粒尺寸为1-3 μm. 此外, 分析锂元素在烧结过程中引起掺杂缺陷变化, 锂元素由ZnO晶格的间隙位置转移为替代锌晶格位置, 实现受主掺杂, 为实现p型ZnO薄膜的制备奠定基础.