单脉冲BOXCARS技术在瞬态燃烧场测温中的应用

 用单脉冲交叉相干反斯托克斯喇曼散射技术测量了两种不同固体燃剂的瞬态燃烧场的温度。对燃烧场进行了优化，给出了在燃烧场中取得的部分典型单脉冲CARS光谱及其理论拟合结果，得到了燃烧场的温度及其随高度的分布；稳定燃烧时两种燃剂燃烧场的温度基本保持不变，平均值分别为2 260，2 090K；测量了实验的纵向空间分辨率。结果表明，BOXCARS技术能较好地完成复杂的瞬态燃烧场温度的测量工作。     

红外光谱遥测固体推进剂燃烧温度及有机化合物对其影响

本文用遥感FTIR光谱 ,测定了固体推进剂燃烧火焰在光谱范围为 4 5 0 0～ 70 0cm- 1 处的红外发射光谱 ,利用HCl分子转振基带 (3 4 6 μm)精细结构的P 分支光谱 ,准确测定了固体推进剂燃烧火焰温度 ,并对含有不同材料固体推进剂 ,如有机化合物对燃烧温度的影响 ,作了讨论。     

Hot flow analysis of swirling sudden-expansion dump combustor

Hot flow of a sudden-expansion dump combustor with swirling is analysed by employing an infinite chemical reaction rate. Turbulence properties are closed using one type of algebraic Reynolds stress model and two types of κ–? model. One of the κ–? models includes a swirling effect modification to the ε-equation. Computations have been performed by the SIMPLE-C algorithm with a power-law scheme. The calculated results of the momentum fields and turbulence quantities for swirling flow are compared with the available experimental data. It is shown that the standard κ–? model gives poor prediction of the mean velocity, particularly the tangential velocity. For the hot flow analysis of a sudden-expansion dump combustor with swirling flow it is suggested that it is necessary to use the modified κ–? model or algebraic Reynolds stress model.     

钼酸盐对卷烟燃烧氧化反应的催化作用

用自吸烟机、气相色谱，高效液相色谱和电子自旋波谱分别检测钼酸盐处理的卷烟和对照卷烟的燃烧速度，烟气焦油量，焦油中BaP和自由基的浓度，用差热分析和热失重分析探讨反应机理，结果表明，钼酸盐添加剂对降低卷烟燃烧反应的活化能，提高卷烟的燃烧速度，降低烟气焦油量，焦油中BaP和自由基有较高的活性。     

双（甲基二茂铁基）代烷羟的合成

二茂铁衍生物在复合固体火箭推进剂中用作燃速催化剂,但其挥发性和迁移性较大,直接影响储存或使用时导弹的弹导性能。本文报导三种新型燃速催化剂:双(甲基二茂铁基)甲烷,2,2-双(甲基二茂铁基)丙烷和2,2-双(甲基二茂铁基)丁烷的合成和表征。小型试验表明其催化活性、挥发性及迁移性能均优于国内目前使用的叔丁基二茂铁。     

Polycyclic Aromatic Hydrocarbons Formation from Fuel and Additives Combustion

A study has been made of the effect of additives to the fuel of a turbulent diffusion flame on the formation of soot and polycyclic aromatic hydrocarbons (PAHs). Fuels containing a polystyrene thickener doped with benzene proved to have many advantages over unthickened fuels. Most significant were an increase in the burning time and the flash point. Nevertheless, polystyrene and benzene additives to a considerable extent increased the formation of soot and PAHs. The analysis of PAHs in this study was made by capillary gas chromatography (GC) and capillary gas chromatography/mass spectrometry (GC/MS). A total of 42 individual compounds were characterized by their retention indices and mass spectra.     

Radicals Containing Hydrogen,Carbon and Oxygen Atoms

There is much new information available on radicals containing C, H and O atoms. Indeed, most of the data discussed in this review did not exist twenty years ago. New, more powerful laser and microwave experimental techniques have greatly expanded our knowledge of the energetics, spectra, reactions and decomposition processes of these radicals. This review attempts to give a unified discussion of the radicals.     

Preparation and characterization of optical spectroscopy of Lu2O3:Eu nanocrystals

Nanoscale Lu₂O₃:Eu powders were prepared by solution combustion synthesis. X-ray diffraction (XRD), high-resolution electronic microscope (HREM), Fourier transform infrared spectroscopy (FT-IR), excitation and emission spectra, as well as fluorescent decay curves were measured to characterize the structure and luminescent properties of the samples. The results show that the compound of composition Lu₂O₃ crystallizes in pure cubic structure. By changing the ratio of glycine to nitrate in the combustion process, the particle size varies from 40 nm to less than 5 nm. The emission and excitation spectra strongly depend on the particle size of the samples. Novel emission band, red-shift of charge transfer band (CTB) and shortening of lifetime were observed in nanoscale samples.     

Toxicity analysis of second use lithium-ion battery separator and electrolyte

Pyrolysis gas chromatography-mass spectrometry (Py-GC-MS) test, smoke toxicity analysis and mouse biological toxicity test were carried out on the second use lithium-ion battery separator and electrolyte. It was found that the types of cracked products of separator and electrolyte under different state of health (SOH) were basically the same, mainly phosphoryl fluoride (POF₃) and long-chain F-containing alkanes, alcohols and esters. The content of POF₃ in the cracked product increases as the SOH increases. The toxic gas components released after the separator and the electrolyte are completely burned mainly include CO, CO₂, and HF. The HF content decreased as the battery SOH decreased, from 101.6 mg/g of the 100% SOH battery to 44.1 mg/g of the 65% SOH battery. In the biological toxicity test, all the mice were found to stop running, close eyes, shed tears, and have shortness of breath. After the test, only 65% SOH and 100% SOH mice recovered their body weight to the pre-experimental average state and gained weight.     

Combustion synthesis of nickel ferrite powders: Effect of NaClO4 content on their characteristics and magnetic properties

Magnetic powders of nickel ferrite (NiFe₂O₄) were successfully synthesized by combustion synthesis in air using iron (Fe), iron oxide (Fe₂O₃), and nickel oxide (NiO) as reactants and sodium perchlorate (NaClO₄) as fuel (or oxidizing agent). The thermal behaviors were characterized using thermogravimetric analysis (TG) and differential thermal analysis (DSC). The as-combusted and final nickel ferrite powders were characterized in terms of chemical composition and morphology by X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) coupled with energy dispersive X-Ray spectroscopy (EDX). In addition, magnetic properties were examined by vibrating sample magnetometer (VSM). The results of TG/DSC analysis indicated that increasing the content of NaClO₄ increased the exothermicity of combustion reaction. XRD indicated that the final nickel ferrite powders formed a single spinel NiFe₂O₄ phase when the amount of NaClO₄ used was 0.08 or 0.10 mol. SEM revealed roughly octahedron particles with sizes in a sub-micrometer range (∼500 nm). All final products exhibited soft magnetism and, synthesis that included 0.1 mol of NaClO₄ produced pure NiFe₂O₄ powders that had a saturation magnetization (M_s) of 58.93 emu/g, which is higher than the reported value (55 emu/g) for the bulk product.