Utilization of maltodextrin based enantioselective, potentiometric membrane electrodes for the enantioselective assay of S-perindopril

Enantioselective, potentiometric membrane electrodes (EPMEs) based on carbon paste impregnated with different maltodextrins {dextrose equivalent (DE) 4.0-7.0 (I), 13.0-17.0 (II) and 16.5-19.5 (III)} as chiral selectors for the assay of S-perindopril is described. The proposed electrodes could be reliably employed in the assay of S-perindopril raw material and from its pharmaceutical formulation, Coversyl^® tablets. The electrode based on maltodextrin (I) showed the best enantioselectivity and time-stability. The surfaces of the electrodes are easily renewable by simply polishing on an alumina paper.     

基于仿生膜的功能化单纳米通道在分析化学中的应用

灵感来源于蛋白质离子通道的仿生功能化单纳米通道,已逐渐成为一种成熟的单分子检测技术和离子整流器。功能化纳米通道包括两种:基因改造的蛋白质纳米通道和固体加工的纳米通道。常用的固体纳米通道有三种:在纳米氮化硅或石墨烯上用聚焦离子束(FIB)或电子束(FEB)轰击得到的纳米通道,化学腐蚀聚合物薄膜中的重金属离子轨迹得到的锥形纳米通道和拉制毛细管或激光刻蚀得到的玻璃纳米孔。相对于蛋白质纳米通道,固态的人工纳米通道具有更优越的机械稳定性,并可用于各种功能基团的修饰。经过近十年的发展,包括蛋白质纳米通道在内的各种仿生的纳米通道已广泛用于对小分子、蛋白质和聚合物等其他一些对象的定性和定量检测。本综述详细介绍了近年来国内外该领域的发展,并对未来的发展方向作了简要的展望。     

Overcoming matrix effects using the dilution approach in multiresidue methods for fruits and vegetables

During recent years matrix effects in liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) have quickly become a major concern in food analysis. The phenomenon of ion suppression can lead to errors in the quantification of the analytes of interest, as well as can affect detection capability, precision, and accuracy of the method. Sample dilution is an easy and effective method to reduce interfering compounds, and so, to diminish matrix effects. In this work, matrix effects of 53 pesticides in three different matrices (orange, tomato and leek) were evaluated. Several dilutions of the matrix were tested in order to study the evolution of signal suppression. Dilution of the extracts led to a reduction of the signal suppression in most of the cases. A dilution factor of 15 demonstrated to be enough to eliminate most of the matrix effects, opening the possibility to perform quantification with solvent based standards in the majority of the cases. In those cases where signal suppression could not be reduced, a possible solution would be to use stable isotope-labelled internal standards for quantification of the problematic pesticides.     

紫外光与臭氧结合消解-离子色谱法测定水质总磷

采用紫外光与臭氧结合消解水样,用离子色谱法测定水质总磷含量,色谱峰高与磷酸盐质量浓度在0-20mg／L范围内线性关系良好,检出限和测定下限分别0．008mg／L和0．03mg／L。此方法无需添加化学试剂,避免了标准分析方法中各种因素的影响,操作简单快速、省时,测定水质总磷的相对标准偏差为0．07％（n=5o对实际样品进行分析,总磷的加标回收率为94．5％～105．5％,表明该方法测定结果可靠,具有一定的应用价值。     

超声波提取-气相色谱法测定土壤中21种酚类化合物

建立了超声波提取-气相色谱法同时测定土壤中21种酚类化合物的分析方法。用二氯甲烷和正己烷混合溶剂提取土壤中的酚类化合物,提取液经碱性水溶液分配净化,去除非酸性有机杂质,再酸化萃取酚类化合物,浓缩后采用气相色谱-氢火焰离子化检测器进行检测,外标法定量。以10 g土壤样品计,酚类化合物的检出限为0.01~0.06 mg/kg。实际样品添加回收试验的回收率为62.9%~111.4%,相对标准偏差为4.3%~24.0%(n=6),准确度和精密度均较好。结果表明:该法操作方便,净化效果好,可用于土壤中多种酚类化合物的测定。     

Catalyst free,regioselective one-pot three-component synthesis of thiazol-2-imine derivatives in ionic liquid

A one-pot three-component approach for the synthesis of thiazol-2-imines has been described by the reaction of amine, phenyl isothiocyanate and β-nitroacrylate in [Hbim]BF₄ ionic liquid. The method is applicable for aromatic, benzylic, aliphatic and cyclic amines. Reusable reaction media, regioselectivity, mild reaction condition, catalyst free and high yield of products are the salient features of this protocol.     

Comparison of two turbulent models in simulating evaporating liquid film in a wiped molecular distillator

Wiped molecular distillation is one kind of molecu-lar distillations, and its difference from others comes from the force by which the evaporating liquid film is formed. With quick rotation of the wiper, the liquid becomes thin-film well distributed on th…     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Ion chromatography for rapid and sensitive determination of fluoride in milk after headspace single-drop microextraction with in situ generation of volatile hydrogen fluoride

In this article, we report a new method that involves headspace single-drop microextraction and ion chromatography for the preconcentration and determination of fluoride. The method lies in the in situ hydrogen fluoride generation and subsequent sequestration into an alkaline microdrop (15 μL) exposed to the headspace above the stirred aqueous sample. The NaF formed in the drop was then determined by ion chromatography. The influences of some crucial single-drop microextraction parameters such as the extraction temperature, extraction time, sample stirring speed, sulphuric acid concentration and ionic strength of the sample, on extraction efficiency were investigated. In the optimal condition, an enrichment factor of 97 was achieved in 15 min. The calibration working range was from 10 μg L⁻¹ to 2000 μg L⁻¹ (R² = 0.998), and the limit of detection (signal to noise ratio of 3) was 3.8 μg L⁻¹ of fluoride. Finally, the proposed method was successfully applied to the determination of fluoride in different milk samples. The recoveries of fluoride (at spiked concentrations of 200 μg L⁻¹ and 600 μg L⁻¹ into milk) in real samples ranged from 96.9% to 107.7%. Intra-day precision (N = 3) in terms of peak area, expressed as relative standard deviation, was found to be within the range of 0.24-1.02%.     

Hollow fiber supported liquid membrane extraction for ultrasensitive determination of trace lead by portable tungsten coil electrothermal atomic absorption spectrometry

Hollow fiber supported liquid membrane extraction (HF-SLME) was used to separate and enrich trace lead from a large volume of 250 mL water sample to a final tiny volume of 30 μL of 1-octanol, 5 μL of which was inject into a tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) for determination of lead. Some important parameters that influenced the extraction and determination were investigated in detail, such as the concentration of ammonium pyrrolidine dithiocarbamate (APDC), pH of sample solution, stirring rate, extraction time, pyrolysis current, atomization current, carrier gas flow rate, as well as interferences. Under the optimized conditions, a practical enrichment factor of 499 and a limit of detection (3σ) of 0.2 ng mL^{− 1} were obtained. The calibration curve was linear in the range of 0.5–10 ng mL^{− 1}. The relative standard deviation (RSD) was 5.6% for five measurements of a 4 ng mL^{− 1} lead standard solution. The accuracy of this method was examined by the analysis of certified reference water samples (GBW(E)080398 and GSBZ(E) 50009-88) for lead. Finally, the proposed method was applied to the determination of lead in local tap water, pond water and river water, with recoveries in the range of 96–109% for spiked samples.