Fibronectin adsorption on gold, Ti-, and Ta-oxide investigated by QCM-D and RSA modelling

The adsorption of fibronectin on gold, Ti-, and Ta-oxide surfaces is investigated by means of the quartz crystal microbalance with dissipation (QCM-D) technique. The surface chemistry (gold, Ti-, and Ta-oxide) is found to influence the frequency shift observed during adsorption of the fibronectin layer with the magnitude being Delta f Au>Delta f Ti-oxide approximately Delta f Ta-oxide. Corresponding variations in the dissipation change normalised to frequency change (Delta D/Delta f) for the layer are observed. The QCM-D data are further analyzed by the random sequential adsorption (RSA) model, and adsorption rate parameter ka and footprint (a) determined, which supported the trend seen in the Delta f and Delta D/Delta f values. The value of ka found by the RSA modelling of the QCM-D resonance frequency data is found to match the ratio between the mass measured by QCM-D and the mass reported by optical techniques in literature. We conclude that comparison of the adsorption rate parameter (ka) obtained by RSA modelling of the QCM-D data with ka values obtained from RSA modelling of data obtained using optical techniques can be a route to determine the degree of hydration of the adsorbed protein layer.     

Effects of citrate on the composition and enzymic coagulation of colloidal bovine casein aggregates

Colloidal casein aggregates (CCA) prepared from soluble whole bovine caseinates in the presence of Ca²⁺ and phosphate (Pi) ions by addition of different citrate (Cit) concentrations showed different mineral and proteic composition. Citrate concentration conditions the Ca and Pi concentrations incorporated into CCA, probably due to the complexing effect of this anion on calcium. A significant change in the incorporated Ca/Pi ratio at 8 mM citrate could very likely be associated to changes in CCA net charge. The incorporation of individual caseins to the colloidal particles obtained, as well as their average size and size distribution, depended also on the Cit concentration used [Cit]_P. α_S- and β-caseins assembled in the CCA structure sharply decreased at a [Cit]_P higher than 15 mM, i.e., at a low Ca²⁺ concentration in the aggregates, showing that the presence of this cation is necessary for the incorporation of these caseins. An inverse relationship between the aggregation step rate in CCA enzymic coagulation and their average size was observed. The aggregation rate vs the average size curve obtained at [Cit]_P 8 mM clearly differed from the curves obtained at 10 and 12 mM, respectively, a fact probably related to a change in the CCA net charge. This behavior showed the effect of citrate concentration on CCA functional properties.     

Enhancement of electronic excitation energy transfer in the colloidal crystals of colloidal silica suspensions doped with fluorescent dyes

The efficiency of electronic excitation energy transfer from photo-excited rhodamine 110 (Rh110, energy donor) to rhodamine B (RhB, energy acceptor) in an exhaustively deionized colloidal silica suspension has been studied. This colloidal suspension shows Bragg reflection due to the formation of colloidal crystals and the Bragg-peak wavelength is controllable by the volume fraction of the silica spheres. When the Bragg-peak wavelength matches with the fluorescence band of Rh110, a depletion was observed in the Rh110 fluorescence spectrum. This means the fluorescence of Rh110 is partially trapped due to the Bragg reflection inside the crystal lattice. In the coexistence of RhB, the enhancement of RhB fluorescence intensity was observed. These facts clearly indicate the trapped photon energy of Rh110 is efficiently transferred to RhB within the colloidal crystals. The quantitative measurements showed that the enhancement of the transfer efficiency is 20% (or slightly more) in the present experimental conditions.     

基于温敏水凝胶的可调胶体晶体制备

基于单分散胶体粒子悬浊液在温敏水凝胶表面可以形成湿润型胶体晶体的现象, 利用温敏水凝胶对水的控释作用制备了温度敏感的可调制胶体晶体. 在室温下利用提拉法在温敏水凝胶聚N-异丙基丙烯酰胺(PNIPAAm)表面制备湿润型胶体晶体膜. 由于胶体粒子的有序排列, 胶体晶体显示出一个尖锐的反射峰. 当温度上升到34 ℃以上时, 由于PNIPAAm水凝胶中的水被释放, 导致胶体晶体中粒子浓度降低, 粒子间距增加; 反射峰发生红移. 这些特性可以通过温度变化进行调制.     

Fabrication of hollow titania microspheres with tailored shell thickness

Submicron hollow spheres are an interesting class of materials that receive significant attention nowadays. Closed and mechanically robust homogeneous hollow titania microspheres with as much shell thickness as 130 nm were fabricated by coating polystyrene beads with titania nanoparticles using sol–gel chemistry and subsequently removing the core either via heating or a chemical dissolution process. The thickness of the titania shell deposited on polystyrene core was finely tuned between 100 and 130 nm by varying the concentration of titania precursor, i.e., Ti(OEt)₄ salt from 0.5 to 2 mM during the coating process. The obtained hybrid core–shell particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermo-gravimetric analysis. The approach employed is well suited to the preparation of titania-coated polystyrene hybrid particles and hollow titania spheres, which can find their applications as novel building blocks with unique optical properties for fabrication of advanced materials, catalyst, and drug delivery system.     

Selectivity in substrate–enzyme complexation studied by surface forces measurement

The selectivity of substrate in substrate–enzyme complexation of heptaprenyl diphosphate synthase was directly investigated using colloidal probe atomic force microscopy (AFM). This enzyme is composed of two dissociable subunits, which exhibits a catalytic activity only when they are associated together in the presence of a cofactor, Mg²⁺, and a substrate, farnesyl diphosphate (FPP). We have recently succeeded to directly demonstrate a specific interaction involved in this enzyme reaction and obtain new insights into the molecular mechanism of the reaction using the approach based on the colloidal probe AFM. The AFM measurement showed the adhesive force between the subunits only in the presence of both Mg²⁺ and FPP. In this study, we studied the substrate selectivity in the complexation by monitoring the adhesive force. The substrates studied are pyrophosphate (PPi), isopentenyl diphosphate (IPP), geranyl diphosphate (GPP), farnesyl monophosphate (FP), and farnesyl geranyl diphosphate (FGPP). No adhesion was observed in the case of PPi, IPP, and GPP. On the other hand, the significant adhesion was observed for phosphate derivatives, which bear prenyl units longer than three. This is in good agreement with the selectivity of the substrates by this enzyme, which catalyzes the condensation reaction of four IPP molecules with FPP to give heptaprenyl (C₃₅) diphosphates. Our study showed a useful methodology for examining the elemental processes of biological reactions.     

一种制备单分散SiO2空心微球的新方法

在乙醇/氨水介质中, 分别以分散聚合和无皂乳液聚合方法制得的不同粒径聚苯乙烯(PS)微球为模板, 以正硅酸乙酯(TEOS)为前驱体, 通过控制介质中氨水的初始体积, 一步法制得了不同粒径的单分散SiO2空心微球. 整个过程无需添加其它溶剂溶解或高温煅烧的方法来除去模板微球. 对SiO2空心微球进行测试表征, 提出了SiO2空心微球的可能形成机制.     

MoO2微米空心球的水热合成及合成机理研究

Micrometer-sized MoO2 hollow spheres were synthesized hydrothermally with ammonium heptamolybdate tetrahydrate as molybdenum source, Cetyltrimethylammonium bromide as structure-directing agent and C2H5OH as reducing agent, respectively. The products were investigated by X-ray diffraction, thermo- gravimetry and differential thermal analysis, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. A morphology transition of "blocks-solid spheres-hollow spheres" during the growth process was observed and the possible mechanism for the formation of MoO2 samples was proposed to be through a microscale Kirkendall effect.     

Polarization model for poorly-organized interfacial water: hydration forces between silica surfaces

The main goal of this paper is to review the theoretical models which can be used to describe the interactions between silica surfaces and to show that a model proposed earlier by the authors (the polarization model), which accounts concomitantly for double layer and hydration forces, can be adapted to explain recent experiments in this direction. When the water molecules near the interface were considered to have an ice-like structure, a strong coupling between the double layer and hydration forces (described by the correlation length between neighboring dipoles, lambda(m)) generates long range interactions, larger than the experimentally determined interactions between silica surfaces. Arguments are brought that a gel layer is likely to be formed on the surface of silica, which, by generating disorder in the interfacial water layers, can decrease strongly the value of lambda(m). Since the prediction of lambda(m) involves a choice for the microscopic structure of water, which is often unknown, the polarization model is also presented here as a phenomenological theory, in which lambda(m) is used as a fitting parameter. Two extreme cases are considered. In one of them, the water molecules near the interface are considered to have an ice-like structure, whereas in the other they are considered randomly distributed. In the first case, the dipole correlation length lambda(m)=14.9 Angstrom. In the second limiting case, lambda(m) can be of the order of 1 Angstrom. It is shown that, for lambda(m)=4 Angstrom, a more than qualitative agreement with the experiment could be obtained, for reasonable values of the parameters involved (e.g. surface dipole strength and density, dipole location, surface charge).     

浸渍-煅烧法合成纳米氧化铜的研究

纳米氧化铜是一种重要的功能材料,在高温超导、有机催化、传感器、锂离子电极材料等方面均具有广泛的应用前景.由于CuO在应用效果上与其形貌、粒径大小以及粒径分布有密切关系,因此,纳米CuO的可控研究仍具有重要意义.