Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Preparation and Characterization of a Cobalt‐Containing Mono‐Phosphine Ligand and its Coordinated Molybdenum Complex

A cobalt‐containing monodentate phosphine [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(i‐Pr)₂] 2f , was prepared from the reaction of (μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₆ 1 with PhC≡CP(i‐Pr)₂. It was accompanied by an oxidized compound, [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(=O)(i‐Pr₂)] 2fo during the chromatographic process. Further reaction of 2f with Mo(CO)₆ resulted in the formation of a 2f ‐ligated molybdenum complex 4 , [(μ₂‐PPh₂CH₂PPh₂‐κ²P)Co₂(CO)₄][μ₂‐η²‐PhC≡CP(i‐Pr₂)‐κP]‐Mo(CO)₅.     

微波场中甲烷部分氧化制合成气 Ⅱ.Co/ZrO_2催化剂在微波场中的升温行为及催化活性

近年来，甲烷部分氧化制合成气（ＰＯＭ）的研究一直十分活跃［１，２］．前文报道了用于甲烷部分氧化制合成气的镍基催化剂（Ｎｉ／Ｌａ２Ｏ３）在微波场中的升温行为和催化活性［３］，发现在达到相同的ＣＨ４转化率时，微波活化方式下的催化剂床层温度比常规加热低得多...     

Multielemental characterisation of cobalt by glow discharge quadrupole mass spectrometry

Multielemental determination and the assessment of purity of cobalt metal used in the preparation of Ni-based super-alloys have been carried out by glow discharge quadrupole mass spectrometry (GD-QMS). Relative sensitivity factors (RSF) generated from certified iron matrix reference samples (NIST 663 and 664 low alloy steel pin standards) could be used for the determination of different trace element constituents of the sample. Different wet chemical procedures were also carried out for the determination of the trace constituents in the sample. The GD-QMS results are in reasonably good agreement with those obtained from wet chemical procedures, validating the use of the RSF values generated on low alloy steel standards for the computation of trace element concentrations in cobalt metal. A variety of molecular ions formed through the reaction of cobalt (matrix) with the discharge gas (argon) were also detected.     

4－（2－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Fe、Co、Ni

４－（２－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Ｆｅ、Ｃｏ、Ｎｉ格日勒，李惠梅，李南强，汪尔康（中国科学院长春应用化学研究所电分析化学开放实验室，北京大学化学系，长春，１３００２２）关键词液相色谱，Ｆｅ，Ｃｏ，Ｎｉ，４－（２－氨基噻唑）...     

钴（Ⅱ）与2,2’-联吡啶-1,1’-二氧化物的多核配合物的合成和性质

以无水CoCl2和2,2’-联吡啶-1,1’-二氧化物为原料,在DMF溶剂中合成了一种多核配合物.经元素分析、紫外光谱、红外光谱和摩尔电导等方法测得它的组成为[Co3(bipyO2)4Cl4]Cl2,并对该配合物的气敏特性进行了研究. 结果表明, 该配合物对氨气有良好的敏感性和选择性.由它制作的传感器可望用于涉氨化工生产中氨浓度的自动测量和控制.     

高活性锆掺杂钴催化剂的制备及其催化甲烷燃烧性能研究

由水热法制备了掺杂锆摩尔百分比为0，10，20，30．40，50％的钴催化剂，该系列催化剂对甲烷的低温催化燃烧显示出高活性．其中，10％Zr掺杂的催化剂活性最好，可在370℃使甲烷转化率达100％．XRD分析表明，该法制得的催化剂中的活性四氧化三钴物种是由一种晶态的碳酸钴前体分解而成，Co3O4为粒径在20～40nm之问的纳米粒子．用热重分析(TG)研究了碳酸钴前体的热分解行为．     

溶出伏安法同时测定水中痕量铀和镍

本文报道了同时测定钴和镍的一种方法.在 0.01mol/L NH_3·H_2O-0.01mol/LNH_4Cl-3.0×10~(-5)mol/L安息香缩氨基硫脲(BTSC)溶液中,钴(Ⅱ)和镍(Ⅱ)均产生非常灵敏的还原波,其峰电位分别是:-0.94和-0.75V(vs.SCE),峰电流与钴和镍的浓度分别在2.0×10~(-8)~1.0×10~(-6)和1.0×10~(-8)~8.0×10~(-7)mol/L范围内成直线关系,该方法用于测定水中痕量钴和镍,相对标准偏差分别为1.4~2.0%和2.1~2.5%,回收率分别在98.0%~101.8%和97.9%~102.1%之间.     

meso－四（4－磺酸苯基）卟啉与Co（Ⅱ）的显色反应的研究

本文研究了弱酸性介质中钴（Ⅱ）与ＴＰＰＳ４的显色反应条件。实验发现胺类化合物质子化后，不参与成络反应，而均能使ＴＰＰＳ４试剂的吸光度大大降低，从而提高了测定的灵敏度，Ｃｏ（Ⅱ）－ＴＰＰＳ４络合比为１：１，ε＿（４２６）＝３．５４×１０￣５，钴含量在０～５．０μｇ／２５ｍＬ范围内呈线性，并用于烟草、茶叶中痕量钴的测定，得到了满意的结果。