Electrooxidation of carbo/thiocarbohydrazide and their hydrazone derivatives at a glassy carbon electrode

Electrochemical oxidation of thio/carbohydrazide and their hydrazone derivatives Benzaldehyde thiocarbohydrazone [BTCH] diacetylene thiocarbohydrazone [DATCH] have been studied in Brit-ton Robinson buffer in aqueous and nonaqueous media at a glassy carbon electrode. The effects of pH, sweep rate, concentration, temperature and surfactants have been studied. The complex bis (carbo/thiocabohydrazide) Zn(II) chloride was also subjected to voltammetric analysis in order to understand the reactivity both in free and metal bound states. The reaction conditions were optimized for the determination of above compounds in micrograms quantities by differential pulse voltammetry, analytical utility of this investigation is also highlighted.     

碳糊电极阳极溶出法测定中药甘草中桑色素

用碳糊电极阳极溶出法测定桑色素的含量。在0.15mol·L-1NH4Cl 氨水缓冲溶液的介质中富集120s,桑色素在+0.10V(vs.SCE)左右出现阳极溶出峰。其峰电流的大小与桑色素的浓度呈线性关系。线性范围为4.00×10-6～1.40×10-5mol·L-1,相关系数为0.9996,检出限可达1.00×10-6mol·L-1,回收率为99.87%～102.01%。此法不用汞电极,灵敏度高,操作方便、快捷,成功地用于甘草提取物中桑色素的测定。     

Perfluorinated anion-exchange polymer mercury film electrode for anodic stripping voltammetric determination of zinc(II): effect of model organic compounds

The determination of zinc ion (1-60 ng ml⁻¹) by anodic square-wave stripping voltammetry on an anion-exchange perfluorinated polymer Tosflex mercury film electrodes (TMFE) was evaluated. The detection limit was 0.1 ng ml⁻¹ Zn(II). The effect of various organic compounds (gelatin, albumin, starch, camphor, humic acid, Triton X-100, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)) is explored. The results indicate that due to the size-exclusion and ion-exchange properties of Tosflex film, the TMFE is considerably more resistant to organic interference than the bare mercury film electrode.     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

丝网印刷普鲁士蓝修饰电极催化还原测定过氧化氢

制备了普鲁士蓝修饰的丝网印刷过氧化氢传感器,研究了过氧化氢在该修饰电极上的电催化还原特性,考察了有关修饰膜制备和试验条件对传感器性能的影响。结果表明,pH4.0的0.2mol·L-1KH2PO4 K2HPO4缓冲溶液(PBS)中,修饰电极对过氧化氢显示出快速的电化学响应,较高的稳定性、重现性和催化活性,测定的线性范围为1.0×10-5～1.0×10-3mol·L-1,相关系数为0.999,检出限为6.0×10-6mol·L-1(3σ)。电极制作方法简便,可用于实际样品的测定。     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

Critical Comparison of Four Simple Adaptors for Flow Amperometric and Stripping Voltammetry with Mercury Drop Electrodes in Batch Cells

Electrochemical batch cells with mercury drop electrodes, MDEs, are readily available from a number of producers and widely used in electroanalysis for polarography, voltammetry and stripping voltammetry. To increase sample throughput and reduce reagent and sample consumption, the tendency is to couple the MDE with flow analysis systems (e.g., FIA, SIA or BIA). Many special flow cells for MDEs are described in the literature, but it is easier to convert existing commercial batch cells to flow operation. To assess the performance of such flow adaptors, four models were chosen because they are directly fitted to the glass capillary of any MDE, light enough not to impair the mechanical drop knocker and can be effortlessly built in the laboratory. They were all found adequate for flow amperometry and stripping voltammetry, with differences in sensitivity, flow rate dependence, response time, drop stability, tolerance to bubbles, uncompensated resistance and recontamination of disposed analyte from the electrolytic bath. Two of them, a simple L‐shaped PTFE tube and an upstream nozzle holder made from a disposable pipette tip, gather a larger set of desirable features.     

Thermodynamics of hydrogen-isotope-exchange reactions. Proton solvation inn-hexanol and water

This paper reports our results for the direct experimental determination of the equilibrium constant for the hydrogen-isotope-exchange reaction, 1/2D₂(g)+HCl(hexOH)=1/2H₂(g)+DCl(hexOD), where hexOH isn-hexanol and hexOD isn-hexanol with deuterium substitution in the alcohol function. The reaction was studied in electrochemical double cells without liquid junction for which the net cell reaction is the above isotope-exchange reaction. The experimentally determined value of ε° (296.0°K) for this cell is 4.03±0.95 mV (strong electrolyte standard states, mole-fraction composition scale); the value of the equilibrium constant for the reaction is 1.17±0.05. The contributions of isotope-exchange and transfer effects to the magnitude of the standard Gibbs energy change for the above reaction and for the analogous reaction 1/2D₂(g)+HCl(aq)=DCl(daq)+1/2H₂(g) are considered. Our results support the conclusion of Heinzinger and Weston that the formulation of the solvated proton in water as H₃O⁺, as opposed to H₉O₄ ⁺, is sufficient for the interpretation of the thermodynamics of hydrogen-isotope-exchange reactions in water. We also find that the formulation of the solvated proton inn-hexanol as ROH ₂ ⁺ is sufficient for the interpretation of our results on the thermodynamics of hydrogen-isotope-exchange inn-hexanol.     

Ferrocenyl and permethylferrocenyl cyclic and polyhedral siloxane polymers as mediators in amperometric biosensors

Cyclosiloxane and silsesquioxane-based ferrocenyl and permethylferrocenyl polymers have been used as mediators in amperometric enzyme electrodes for the detection of glucose. Biosensors have been prepared by electrostatically immobilizing the enzyme glucose oxidase (GOx) on electrodes modified with the polymers. The steady-state amperometric response of the sensors is investigated as a function of the applied potential and substrate concentration. The dependence of the sensors response on the structure of the siloxane-framework and on the presence or not of methyl groups on the ferrocenyl units is discussed.     

Studies of the electrochemical behavior of epinephrine at a homocysteine self-assembled electrode

The self-assembled electrode with the homocysteine monolayer (Hcy/Au) has been characterized by infrared spectroscopy and ac impedance spectroscopy in electrolyte. The Hcy/Au electrode is demonstrated to promote the electrochemical response of epinephrine (E) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k_s) is 2.1×10⁻² cm s⁻¹ at the self-assembled electrode. The reduction peak of E can be used to determine the concentration of E in presence of ascorbic acid (AA) owing to the Hcy/Au also promoting the electrochemical oxidation of AA.