Electrochemical Behaviors of Adenosine‐5′‐triphosphate on Molecular Wire Modified Carbon Paste Electrode and Its Sensitive Detection

A new electrochemical method was proposed for the determination of adenosine‐5′‐triphosphate (ATP) based on the electrooxidation at a molecular wire (MW) modified carbon paste electrode (CPE), which was fabricated with diphenylacetylene (DPA) as the binder. A single well‐defined irreversible oxidation peak of ATP appeared on MW‐CPE with adsorption‐controlled process and enhanced electrochemical response in a pH 3.0 Britton‐Robinson buffer solution, which was due to the presence of high conductive DPA in the electrode. The electrochemical parameters of ATP were calculated with the electron transfer coefficient (α) as 0.54, the electron transfer number (n) as 1.9, the apparent heterogeneous electron transfer rate constant (k_s) as 2.67 × 10^?5 s^?1 and the surface coverage (Γ_T) as 4.15 × 10^?10 mol cm^?2. Under the selected conditions the oxidation peak current was proportional to ATP concentration in the range from 1.0 × 10^?7 mol L^?1 to 2.0 × 10^?3 mol L^?1 with the detection limit as 1.28 × 10^?8 mol L^?1 (3σ) by sensitive differential pulse voltammetry. The proposed method showed good selectivity without the interferences of coexisting substances and was successful applied to the ATP injection samples detection.     

微米铜丝的低温力学性能测试

针对纤维材料变温环境力学性能测试的需要,在华中科技大学研制的纤维材料试验机的基础上引入了温控装置,从而实现纤维材料在高低温环境下的力学性能测试。采用该装置对不同直径微米铜丝在不同温度、不同拉伸速率条件下的力学性能开展实验研究,测试结果表明弹性模量和抗拉强度随温度的降低而线性增加,屈服强度的变化不太明显。另外,低温环境下微米铜丝的力学性能表现出与其直径相关的尺度效应,而这一现象在常温下一直没有观测到。最后,还研究了拉伸速率对微米铜丝的力学性能影响,结果表明,在现有装置的许用范围之内,拉伸速率对其力学性能的影响不大。     

张力对斜拉桥拉索镀锌钢绞线腐蚀行为影响

应用伏安极化法和中性盐雾腐蚀试验研究了张力作用下斜拉桥拉索镀锌钢绞线在5%NaC l溶液中腐蚀行为.腐蚀产物理化性质由XRD、TG-DTA等测试表征.结果表明,镀锌钢绞线的腐蚀电流,即腐蚀速率随试验前施加的张力增加而增大,其产生白锈的盐雾试验周期小于1,经15~22 kN张力作用后的镀锌钢绞线,产生红锈的盐雾试验周期为16,而经0、10 kN张力作用的钢绞线,产生红锈的周期则延长至23,钢绞线腐蚀产物主要是Zn5C l2(OH)8.H2O、Zn4(CO3)(OH)6.H2O和ZnO.     

CoFeSiB非晶丝弱磁场测量仪的研制

设计了以Co基非晶丝为敏感元件的传感器探头,多谐振荡励磁电路,信号处理电路,单片机显示电路,且对该磁场测量仪进行了标定。     

提升钢丝绳动态分析的分段线性化解法

本文在研究提升机绳系动态特性过程中,建立了一类非齐次边界条件混合问题的波动方程;应用离散化方法将非齐次项分段线性化,得到了该类波动方程的半解析解.     

利用光杠杆法测量金属丝的弹性滞后环

利用大学物理实验中的光杠杆法测定金属丝弹性模量的原理和设备,对具有超弹性的NiTi丝的弹性滞后环进行了测定结果表明,此种方法可以很好地测定NiTi丝的弹性滞后环,而且操作简单使用方便,是一种非常有效的测定金属细丝弹性滞后环的方法.     

Wire metamaterial based on semiconductor matrices

In this Letter, we have presented a new approach for the fabrication of nanowire media (wire metamaterials) by electrochemical methods. A^IIIB^V porous matrices (a host medium) were prepared by anodic electrochemical etching of industrial substrates. The host medium has been filled via electrochemical deposition with a metal and by means of annealing process. We have shown that this technique can be used to fabricate a nanowire medium with unique parameters (such as aspect ratio, high electric permittivity and strong χ⁽³⁾ nonlinearity near the fundamental absorption edge of the host media). (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A peculiarity of diffraction measurements using a Gaussian laser beam

Numerical modelling of the Gaussian beam diffraction by a wire near the Fraunhofer limit is presented. Two cases are considered: the case of the wire being on the axis of the beam and the case of the wire being off-axis. For the case where the wire is on the axis, the displacements of the diffracted minima are calculated. For the off-axis case, the changes in the positions of the maxima and minima and the power density are calculated. The conditions are determined at which the measurements made using a Gaussian beam can be calculated using the formula for plane waves. This work arises in connection with research being performed into the Doppler spectrum of big particles.     

金属丝的杨氏模量测定实验的改进

对金属丝杨氏模量测定仪重新设计.将金属丝水平放置,在中点处悬挂重物,通过测量金属丝伸长后的转角,进而测量金属丝的杨氏模量.     

Polaronic shift of the Wannier-Mott exciton binding energy in a quantum wire with allowance for the phonon confinement effect

Within the framework of the Li-Low-Pines model the interaction of a Wannier-Mott exciton with polar optical phonons in a cylindrical semiconductor wire is studied, taking into account the phonon confinement effect. An analytical expression for the exciton binding energy with allowance for the polaronic effect is obtained. Numerical calculations of the binding energy are carried out for AlAs/GaAs/AlAs and ZnSe/CdSe/ZnSe wires with a various degree of polarity of quantum wire materials. The polaronic shift of the binding energy of light and heavy hole excitons is calculated.