Optimisation of sample pre-treatment method for the determination of triclosan in marine sediments by high-performance liquid chromatography and marine benthic quality assessment in the southern Baltic Sea

This study comprises optimisation of sample preparation and HPLC analytical procedure for the determination of a personal care product ingredient, triclosan (TCS), in marine sediments. The testing of several varying pre-treatment parameters confirmed that ultrasonic extraction is an effective method for the isolation of TCS from marine sediments, and that the choice of extraction solvent appeared to be of major importance. The selection of the mobile-phase composition and the absorption wavelength was made for the high-performance liquid chromatography analysis step. Based on the validated method, a preliminary assessment of the benthic ecosystem quality with regards to TCS contamination has been demonstrated in the southern Baltic Sea – a semi-enclosed sea, characterised by poor water exchange, thus particularly susceptible to anthropopression. TCS has been identified and quantified in situ in marine bottom sediments, sediment dwelling isopod – Saduria entomon L. and estimated in silico in pore waters based on the equilibrium partition theory in order to assess the potential exposure and uptake from the aqueous phase. TCS concentrations identified in the bottom sediments of the Gdansk Basin, as the natural habitat for studied S.entomon L., appear to be threatening to the benthic environment. Particularly when considering S. entomon L. as a major nutrition source for cod (Gadus morhua) undergoing the feminisation process, since the recent studies prove TCS to have a potential to induce critical alterations in the endocrine system of marine ichthyofauna.     

Determination of natural and synthetic estrogenic compounds in coastal lagoon waters by HPLC-electrospray-mass spectrometry

A new analytical method was developed for the simultaneous determination of estrogenic compounds of natural (estradiol, estriol, estrone) and synthetic origin, both steroidal (ethinylestradiol, mestranol) and non-steroidal (benzophenone, bisphenol-A, diethylstilbestrol, octylphenol, nonylphenol, nonylphenol monoethoxylate carboxylate), in environmental aqueous samples by high-performance liquid chromatography coupled with ion trap-mass spectrometry via electrospray interface (HPLC-ESI-IT-MS). Quantitative MS detection was performed in the negative mode for all compounds except mestranol and benzophenone, which were detected under positive ion conditions. Very low method detection limits (MDLs), between 0.1 and 2.6?ng/L, were achieved in coastal lagoon water samples, while the developed solid-phase-extraction (SPE) procedure permitted simultaneous recovery of all analytes from spiked water samples with yields >70% (7–11 RSD%), except estriol and benzophenone, which were recovered with 60% (9 RSD%) and 50% (11 RSD%) yields, respectively. The proposed method was applied to the analysis of Venice (Italy) lagoon waters, where average concentrations of selected compounds in the 2.8–33?ng/L concentration range were found.     

Towards a Standard Method for the Measurement of Organic Carbon in Sediments

Abstract

The precisions achieved by two different methods for analysis of organic carbon in soils and sediments were determined and compared. The first method is a rapid dichromate oxidation technique (Walkley-Black) that has long been a standard in soil chemistry. The second is an automated coulometric titration method for which commercial instrumentation is available. The latter method shows relative standard deviations that are six to twenty times smaller than the dichromate oxidation technique. Development of a standardized sediment with a low level of organic carbon is recommended in order to facilitate the evaluation of the precision and accuracy of organic carbon measurement techniques.     

Ammonium Acetate Extracts and Their Analysis for the Speciation of Metal Ions in Soils and Sediments

Abstract

The use of ammonium acetate (1 mol/l at pH 7) extraction of soils and sediments for the speciation of metal ions is briefly discussed. Because the sensitivity of flame atomic absorption spectrometry (FAAS) is insufficiently sensitive for the determination of many of the heavy metals in ammonium acetate extracts of unpolluted, and even in some polluted soils, the use of electrothermal atomic absorption spectrometry (ETAAS) was studied. A general procedure, using graphite furnace atomisation and the “universal” matrix modifier, palladium, was developed, that was sufficiently sensitive for the determination of Cd, Cr, Cu, Ni, Pb and Zn even in unpolluted soils. The concentration of zinc, however, will almost always be high enough for determination of FAAS and this method is to be preferred to ETAAS for this element.

While, for Cr, Cu, Ni and Pb, direct calibration with external standard solutions is practicable, it is necessary to use the standard additions calibration method for cadmium, to avoid matrix interference effects. The standard additions technique is recommended, however, because it compensates for real differences in the operating parameters of different instruments set to the same nominal values. This is particularly important for interlaboratory comparisons or for certification analyses in the preparation of reference materials.     

A study of arsenic contamination by graphite furnace atomic absorption spectrometry in the Lami estuary in Fiji

The Suva–Lami coastal environment in Fiji is submitted to intense heavy metal input from land-based industrial activities. Therefore, continuous environmental monitoring is required in order to develop and implement environmental management programs for the Suva Lagoon. Current ongoing research includes investigation and monitoring of the short and long-term variation of several heavy metals in the sediments of Suva and Lami coastal environments based on the observations from past similar studies. This study, for the first time, reports the incidence of high arsenic (As) contamination in the sediments of the Lami estuary. The short term variations in the concentrations of As in Lami estuary were in the range of 1.0–334.0 mg kg⁻¹ (dry weight), which ascended gradually over a period of one year. A literature survey showed that this is the highest As contaminated site as compared to other studied sites in Fiji. The results indicate that immediate corrective waste management measures have to be practiced by the industrial community to lessen the impact of toxic metal loading in these vital areas of community life.     

Matrix solid phase dispersion-assisted BCR sequential extraction method for metal partitioning in surface estuarine sediments

The BCR (the Community Bureau of Reference) of the European Union sequential extraction scheme for metal partitioning in estuarine sediments has been accelerated by using a matrix solid phase dispersion (MSPD) approach. The MSPD assisted BCR procedure consists of passing the extractants proposed by conventional BCR protocol (0.11 M acetic acid, 0.1 M hydroxylammonium chloride and 8.8 M hydrogen peroxide plus 1 M ammonium acetate) through the dispersed sample packaged inside a disposable syringe. Different silica-, magnesium- and aluminium-based materials were tested as dispersing agents and sea sand was found to offer the best performances. Variables for assisting the three stages of the BCR protocol were optimized, and accurate results were obtained when assisting the first and the third stages (exchangeable and oxidizable fractions, respectively). However, lack of accuracy was observed when assisting the second step (reducible fraction) and this result agrees with most of the assisted BCR procedures for which extracting the reducible fraction is the most troublesome stage. The organic matter oxidation (third stage) was successfully assisted by passing hydrogen peroxide at 50 °C through the dispersed sample inside de syringe just before passing ammonium acetate. Therefore, the time-consuming and unsafe conventional organic matter oxidation processes, commonly performed even for microwave/ultrasounds assisted BCR procedures, are totally avoided. Inductively coupled plasma-mass spectrometry (ICP-MS) was used as a selective detector. The target elements were Cd, Co, Cr, Mn, Ni, Sr and Zn (first stage), Cd, Co and Ni (second stage), and Co, Cr, Mn, Ni, Sr and Zn (third stage). Repeatability of the method (n = 7) was good, and RSDs values of 9, 10, 10, 8, 8, 3 and 8% was obtained for Cd, Co, Cr, Mn, Ni, Sr and Zn, respectively (first stage); 10, 9 and 9% for Cd, Co and Ni, respectively (second stage); and 6, 2, 3, 4, 7 and 9% Co, Cr, Mn, Ni, Sr and Zn, respectively (third stage). The procedure was also validated by analysing two certified reference materials (CRM 601 and CRM 701). Good accuracy was obtained for the target elements extracted at the first stage: Cd (4.0 ± 0.1 and 7.3 ± 0.09 μg g⁻¹ in CRM 601 and CRM 701, respectively), Cr (0.36 ± 0.008 and 2.21 ± 0.08 μg g⁻¹ in CRM 601 and CRM 701, respectively), Ni (8.0 ± 0.3 and 15.4 ± 0.3 μg g⁻¹ in CRM 601 and CRM 701, respectively) and Zn (262 ± 3 and 203 ± 3 μg g⁻¹ in CRM 601 and CRM 701, respectively). Also, good accuracy was observed for elements extracted at the third step: Cd (1.8 ± 0.09 and 0.29 ± 0.03 μg g⁻¹ in CRM 601 and CRM 701, respectively), Cr (145 ± 4 μg g⁻¹ in CRM 701), Ni (8.2 ± 0.7 and 15.1 ± 0.5 μg g⁻¹ in CRM 601 and CRM 701, respectively) and Zn (45 ± 0.7 μg g⁻¹ in CRM 701).     

Measurements of arsenite and arsenate contained in mining river waters and leached from contaminated sediments by sequential hydride generation flow injection analysis

In this work, a new analytical method for gasifiable compounds based on sequential hydride generation flow injection analysis (SHGFIA) was applied to water analysis and leaching investigation. For water analysis, it was confirmed that 1 μg L⁻¹ As(III) and As(V) were stable for a few days when EDTA was added in the sample waters. Dissolved As(III) and total arsenic (As(III) + As(V)) were converted to AsH₃ in neutral and acidic medium, respectively, to transfer to a miniature gas scrubber (100 μL in absorber volume). The collected arsenic was successively measured by flow analysis based on molybdenum blue chemistry. With this system, changes in As(III) and As(V) concentrations of water placed with arsenic-contaminated-sediment was monitored in near real time. From these data, kinetic analyses were carried out and kinetic constant was obtained from plot of ln{(C^∞ − C)/C^∞} where C and C^∞ were leached arsenic concentration and its final concentration, respectively. It was found that rate of As(III) leaching was much faster than that of As(V) while As(V) leached more in amount compared to As(III). In this work, it was demonstrated that kinetic investigation is also one of the important application of flow analysis. The SHGFIA system showed excellent performance for leaching analysis of arsenic with discrimination of As(III) and As(V).     

微波消解-超声辅助萃取-ICP-AES测定沉积物中的10种金属元素

采用微波消解-超声辅助萃取体系,仅需用盐酸和硝酸对沉积物样品进行前处理,即可用ICP-AES测定沉积物样品中的10种金属元素.在最优化的实验条件下,测定值与参考值吻合,相对标准偏差均小于5％,加标回收率在92.2％～106％之间.     

Natural Products Produced in Culture by Biosynthetically Talented Salinispora arenicola Strains Isolated from Northeastern and South Pacific Marine Sediments

Laboratory cultures of two ‘biosynthetically talented’ bacterial strains harvested from tropical and temperate Pacific Ocean sediment habitats were examined for the production of new natural products. Cultures of the tropical Salinispora arenicola strain RJA3005, harvested from a PNG marine sediment, produced salinorcinol (3) and salinacetamide (4), which had previously been reported as products of engineered and mutated strains of Amycolatopsis mediterranei, but had not been found before as natural products. An S. arenicola strain RJA4486, harvested from marine sediment collected in the temperate ocean waters off British Columbia, produced the new aminoquinone polyketide salinisporamine (5). Natural products 3, 4, and 5 are putative shunt products of the widely distributed rifamycin biosynthetic pathway.     

Fit-for-Purpose Assessment of QuEChERS LC-MS/MS Methods for Environmental Monitoring of Organotin Compounds in the Bottom Sediments of the Odra River Estuary

Organotin compounds (OTCs) are among the most hazardous substances found in the marine environment and can be determined by either the ISO 23161 method based on extraction with non-polar organic solvents and gas chromatography analysis or by the recently developed QuEChERS method coupled to liquid chromatography-mass spectrometry (LC-MS/MS). To date, the QuEChERS LC/MS and ISO 23161 methods have not been compared in terms of their fit-for-purpose and reliability in the determination of OTCs in bottom sediments. In the case of ISO 23161, due to a large number of interferences gas chromatography-mass spectrometry was not suitable for the determination of OTCs contrary to more selective determination by gas chromatography with an atomic emission detector. Moreover, it has been found that the derivatization of OTCs to volatile compounds, which required prior gas chromatography determination, was strongly affected by the sediments’ matrices. As a result, a large amount of reagent was needed for the complete derivatization of the compounds. Contrary to ISO 23161, the QuEChERS LC-MS/MS method did not require the derivatization of OTC and is less prone to interferences. Highly volatile and toxic solvents were not used in the QuEChERS LC-MS/MS method. This makes the method more environmentally friendly according to the principles of green analytical chemistry. QuEChERS LC-MS/MS is suitable for fast and reliable environmental monitoring of OTCs in bottom sediments from the Odra River estuary. However, determination of di- and monobutyltin by the QuEChERS LC-MS/MS method was not possible due to the constraints of the chromatographic system. Hence, further development of this method is needed for monitoring di- and monobutyltin in bottom sediments.