The Prospect of Dimensionality in Porous Semiconductors

With the advent of silicon-based semiconductors, a plethora of previously unknown technologies became possible. The development of lightweight low-dimensional organic semiconductors followed soon after. However, the efficient charge/electron transfers enabled by the non-porous 3D structure of silicon is rather challenging to be realized by their (metal-)organic counterparts. Nevertheless, the demand for lighter, more efficient semiconductors is steadily increasing resulting in a growing interest in (metal-)organic semiconductors. These novel materials are faced with a variety of challenges originating from their chemical design, their packing and crystallinity. Although the effect of molecular design is quite well understood, the influence of dimensionality and the associated change in properties (porosity, packing, conjugation) is still an uncharted area in (metal-)organic semiconductors, yet highly important for their practical utilization. In this Minireview, an overview on the design and synthesis of porous semiconductors, with a particular emphasis on organic semiconductors, is presented and the influence of dimensionality is discussed.     

Effect of Topology on Photodynamic Sterilization of Porphyrinic Metal-Organic Frameworks

Porphyrinic metal-organic frameworks (MOFs) are promising photosensitizers due to the lack of self-aggregation of porphyrin in aqueous solution. However, how the topology of porphyrinic MOFs affects the generation of singlet oxygen (¹O₂) is unclear. Here, the effect of the topology of porphyrinic MOFs on their photodynamic performance is reported. Four porphyrinic zirconium MOFs (MOF-525, MOF-545, PCN-223 and PCN-224 with different topologies: ftw , csq , shp and she , respectively) were selected to study the influence of topology on the photodynamic antibacterial performance. The ¹O₂ generation and the photodynamic antibacterial performance followed an decreasing order of MOF-545>MOF-525>PCN-224>PCN-223. The results reveal that the pore size, the distance between porphyrin, and the number of porphyrin per Zr₆O₈ cluster in MOFs greatly affected ¹O₂ generation. This work provides guidance for designing new MOFs for efficient photodynamic sterilization.     

A facile approach to prepare water-soluble magnetic metal (oxide) frameworks based on Na,Ca alginate and maghemite

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

Nanocomposite Hydrogel of Pd@ZIF-8 and Laponite®: Size-Selective Hydrogenation Catalyst under Mild Conditions

The composite hydrogel of a nanoscale metal–organic framework (NMOF) and nanoclay has emerged as a new soft-material with advanced properties and applications. Herein, we report a facile synthesis of a hydrogel nanocomposite by charge-assisted self-assembly of Pd@ZIF-8 nanoparticles with Laponite^® nanoclay which coat the surface of Pd@ZIF-8 nanoparticles. Such surface coating significantly enhanced the thermal stability of the ZIF-8 compared to the pristine framework. Further, the Pd@ZIF-8+LP hydrogel nanocomposite shows better size-selective catalytic hydrogenation of olefins than Pd@ZIF-8 nanoparticles based on selective diffusion of the substrate.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.     

Partial Hydrolysis of Cyanide Coordination Polymers Induced by a Pillar Ligand with Optimized Electrochemical Kinetics for Rechargeable Alkaline Batteries

Coordination polymers are promising cathode materials for rechargeable alkaline batteries. Therefore, the precise modulation of these cathodes by chemical structure and in-depth structure transform study is necessary. Here, two model coordination polymer battery cathodes were designed to demonstrate the dynamic structure–performance relationship. We studied the electrochemical performance of two kinds of nickel-based coordination polymer, comprising a planar 2D cyanide-bridged network and a 3D cyanide-bridged network pillared by pyrazine molecules. The 2D coordination polymer showed serious voltage degradation with poor rate capability, whereas the 3D coordination polymer exhibited stable voltage output coupled with high rate at various current densities. The investigation revealed the underlining relationship of plateau voltage degradation and hydrolysis process of electrodes. It was revealed that the pyrazine pillar molecules in the 3D coordination polymer could suppress the hydrolysis and lead to the in situ formation of partially hydrolyzed structure with excellent electrochemical kinetics; this exhibited obvious smaller peak separation (27 mV compared with 149 mV) and hence an almost twofold increase in capacity retention (31.9 to 50.0 %) and energy density retention (18.2 to 35.9 %) at 10 A g⁻¹.     

3D Uranyl Organic Frameworks Supported by Rigid Octadentate Carboxylate Ligand: Synthesis,Structure Diversity,and Luminescence Properties

Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH₄][(UO₂)₃(HTTDS)(H₂O)] ( 1 ), [(UO₂)₄(HTTDS)₂](HIM)₆ ( 2 , IM=imidazole), [(UO₂)₄(TTDS)(H₂O)₂(Phen)₂] ( 3 , Phen=1,10-phenanthroline), [Zn(H₂O)₄]_0.5[(UO₂)₃(HTTDS)(H₂O)₄] ( 4 ), and {(UO₂)₂[Zn(H₂O)₃]₂(TTDS)} ( 5 ), {Zn(UO₂)₂(H₂O)(Dib)_0.5(HDib)(HTTDS)} ( 6 , Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO₂)₄[Cu₃(u₃-OH)(H₂O)₇](TTDS)₂} ( 7 ) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H₈TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO₇ pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO₂]²⁺ units as co-ligands. The second metal centers were introduced in the syntheses of 4–7 , and in all cases, they are part of the final structures, either as a counterion ( 4 ) or as a component of framework ( 5 − 7 ). Interesting, in 7 , a rare polyoxometalate [Cu₃(μ₃-OH)O₇(O₂CR)₄] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO₂)₂(O₂CR)₄] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.     

Quadruply BN-Fused Tetrathia[8]circulenes with Flexible Frameworks: Synthesis,Structures and Properties

Quadruply BN-fused tetrathia[8]circulenes were synthesized through four-fold electrophilic borylation. The single-crystal X-ray diffraction analysis revealed that the BN-fused tetrathia[8]circulene with peripheral phenyl groups exhibits crystal polymorphism, in which the circulene core adopts both planar and saddle conformations in the solid state. The experimental and theoretical studies revealed that the weaker aromaticity of azaborine compared with benzene renders the flexibility of the BN-fused tetrathia[8]circulenes.