Nanocomposites Produced by Direct Intercalation of Secondary Doped Polyaniline in V2O5

The possibility of the production of nanocomposites based on V₂O₅ and conducting polymers by direct intercalation of macromolecules of secondary doped polyaniline into the interlayer galleries of nanoparticles of aqueous V₂O₅ sol was demonstrated for the first time. The driving force of the intercalation process is substitution of the protons present in the galleries of the V₂O₅ by a polyaniline chain carrying a positive charge.     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

Some thermodynamic aspects of highT c superconductors

Thermochemical and thermodynamical properties of HTSC phases are reviewed for the Y-Ba-Cu-O system and also presented for the newly calculated Bi-Sr-Cu-O system stressing out stoichiometric and phenomenological viewpoints. Simulated data are listed for (H ₂₉₈ ^o -H _o ^o , phase transformation temperatures, standard entropies, standard enthalpies of formation, heat capacities in crystalline phase, etc. Pseudobinary phase diagrams are treated showing the effect of oxygen partial pressure particularly illustrated on the (Sr, Bi, Ba)-Cu-O system.The work was carried out under the project No. A 2010532 supported by the Grant Agency of Academy of Sciences of the Czech Republic and the grant No. 104/97/0589 financed by the Grant Agency of the Czech Republic.     

Crosslinked poly(ethylene oxide) modified with tetraalkylammonium salts as phase transfer catalyst

Radiation crosslinked poly(ethylene oxide)s (PEO) modified with two tetraalkylammonium salts: allyldimethyldodecylammonium bromide and ethylmethacrylate dimethyldodecylammonium bromide were prepared. They have been characterized by elemental analysis, IR, ¹H-NMR spectra, and DSC measurements. Their activity as phase transfer catalysts (PTC) in the model displacement reaction of 1-bromooctane with aqueous sodium cyanide were studied. The reaction kinetics were followed under pseudo-first-order conditions. Small amounts of onium salt inserted into the PEO network gave rise to a five time increase in the rate constant. The recovered catalysts could be re-used without loss of activity. © 1995 John Wiley & Sons, Inc.     

三重四极杆电感耦合等离子体质谱(ICP-MS)法测定氧化铕中13种稀土杂质元素

稀土杂质元素直接影响高纯单金属稀土材料的整体性能,是高科技领域许多材料的重要组成部分。通过考察最佳的消解酸量、温度、时间、氧气反应气流量、稀释气流量,建立了基于三重四极杆电感耦合等离子体质谱仪(ICP-MS/MS)直接测定氧化铕中13种稀土杂质元素分析方法。该方法采用0.1%基体直接进样,可以很大程度提高前处理分析效率。利用碰撞模式测定氧化铕稀土中的Y、La、Pr、Nd、Sm、Gd、Tb、Dy、Ho、Er、Yb、Lu元素,氧气质量转移模式测定氧化铕中的Tm,两种模式结合可以有效去除多原子干扰,实现氧化铕的稳定测试分析。通过对氧化铕标准物质（GBW02902）直接测定分析,结果表明,在碰撞和氧气质量转移模式下,各元素线性相关系数（r）均大于 0.9999,方法检出限为0.001~0.023 mg/kg,测试精密度优于1.99%,13种元素的测试值都在认定值的不确定度范围之内。该分析方法操作简单,测试稳定,效率高,为实验室进行氧化铕材料中REE杂质的准确测试分析提供思路和借鉴。     

全自动高温水解-离子色谱法测定氧化镧铈中氟、氯

为探究稀土氧化物中氟(F)和氯(Cl)元素含量的快速检测方法,通过全自动高温水解仪对氧化镧铈样品进行前处理,并利用氢氧根体系离子色谱仪检测吸收液中F-、Cl-离子的含量,建立了基于全自动高温水解-离子色谱法测定氧化镧铈中的F、Cl元素含量的快速检测方法,该方法有效避免了传统前处理方法过程复杂、分析时间慢、极易受人为干扰的问题。称取0.3g氧化镧铈样品,在氧气流量为300 mL/min,1100 ℃高温下水解燃烧20 min,吸收定容为体积20mL的吸收液,以NAOH(15mmol/L)作为淋洗液,经色谱柱分离,测得F-与Cl-在质量浓度为1.00 mg/L-15.00 mg/L范围内,质量浓度与离子色谱峰面积呈线性关系,相关系数均为0.9999。检出限分别为0.003mg/L和0.12mg/L。全自动高温水解仪联用离子色谱仪检测系统对氧化镧铈中F-的平均加标回收率测定结果为98.4%,标准偏差RSD为0.94%;对Cl-的加标回收率测定结果为97.8%,RSD为2.86%。说明该方法较高准确度及精密度,测试结果准确可靠满足企业和检测机构的测试需求,为稀土氧化中氟、氯元素含量的研究及相关产品的开发提供了理论基础。     

Efficient Oxidation of Cyclohexane over Bulk Nickel Oxide under Mild Conditions

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol—KA oil. Molecular oxygen (O₂), hydrogen peroxide (H₂O₂), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.     

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb²⁺ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g⁻¹, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.     

Photoelectrochemical Properties of Annealed Anodic TiO2 Layers Covered with CuOx

In this work, we present a systematic study on the influence of Cu²⁺ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuO_x-TiO₂ materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH₃COO)₂Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO₂ (E_g~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuO_x-TiO₂ materials had E_g~2.4 eV). Although the photoactivity of CuO-TiO₂ materials decreased in the UV range due to the deposition of CuO on the TiO₂ surface, in the Vis range increased up to 600 nm at the same time.     

氧化镍纳米晶体的制备及其过程分析

为了开发一种新型纳米氧化镍催化剂,能有效地应用于生物质气化过程中去除焦油,本文采用均匀沉淀法成功地制备了纳米氧化镍晶体,并利用TGA、FTIR、XRD、BET、YEM等分析手段对前驱体和产品的性能进行了表征.同时,对前驱体的分解过程进行了全面的分析.分析结果表明前驱体是水合碱式碳酸镍,其分子式为NiCO3·Ni(OH)2·nH2O,它能在360℃下完全分解转化为纳米NiO,同时煅烧条件对合成纳米NiO的晶体粒径影响很大.实验证实所得纳米NiO颗粒呈球形,分散性好,纯度较高,属立方晶系结构,平均粒径约为7.5nm,其BET表面积为187.98m2/g,这显示纳米NiO晶体具有作为高效催化材料的应用可行性.