Zn_(2-x)GeO_(4-x-3y)N_(2y)催化剂的制备、表征及可见光催化性能

通过氮化Zn2GeO4制备了Zn2-xGeO4-x-3yN2y催化剂,其带边吸收由400nm的紫外光区扩展到600nm的可见光区。光催化产氧性能的结果表明,氮化温度为800℃时,制备的催化剂具有最大活性。不同助催化剂对产氧活性的影响研究表明,担载助催化剂能大大提高产氧活性,其中担载Co2O3的产氧活性可达未担载的3.8倍。     

Structural and thermal study of asymmetric α-dioxime complexes of Co(III) with Cl and methyl-pyridines

Two new cobalt(III)-chelates, trans-bis(methyl-ethyl-dioximato)-chloro-β-picoline-cobalt (III) (1), and trans-bis(methyl-ethyl-dioximato)-chloro-3,4-lutidine-cobalt (III) (2) were obtained by oxidizing a mixture of CoCl₂, methyl-ethyl-dioxime and amines: β-picoline (3-methyl-pyridine) for (1) and 3,4-lutidine (3,4-dimethyl-pyridine) for (2). The crystal structure of (1) was determined by single crystal XRD (monoclinic, space group P2₁/c (No. 14) with a = 8.391(3) Å, b = 14.421(5) Å, c = 18.383(8) Å, β = 114.57(2)°, R = 0.0499), while both (1) and (2) were studied by middle and far FTIR spectroscopy, electrospray ionization (ESI) MS, powder XRD and thermal analysis (TG/DTA-MS). Melting of the related complexes 1 and 2 at 219 and 184 °C, respectively, results in an immediate chemical degradation of their whole structure and tarring of ligands.     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

Facile synthesis and capacitive performance of the Co(OH)2 nanostructure via a ball-milling method

Co(OH)₂ nanoparticles were synthesized using only CoSO₄·7H₂O and NaOH as reactants without other auxiliary reagents via a simple, low-cost and practical ball-milling technique and investigated as the active electrode materials for supercapacitors. The structure and morphology of the resulting Co(OH)₂ samples were examined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM). The observations revealed the formation of brucite-like phase of β-Co(OH)₂, which had an irregular sphere-like shape with an average size of 50-100 nm. When investigated as electrode materials for supercapacitors, the β-Co(OH)₂ exhibited good energy-storage performances in terms of high specific capacitance of 599 F g⁻¹ and excellent capacity retention, suggesting its potential application in the electrode material for supercapacitors.     

Fabrication of ZnO:Mn nanoparticles with organic shell in a highly alkaline aqueous environment

Synthesis of undoped and Mn doped ZnO nanoparticles by an inclusive co precipitation method and in situ capping with heteromultifunctional organic stabilizer mercaptosuccinic acid (MSA) in a core shell structure, in highly alkaline aqueous matrix have been accomplished. Near room temperature synthesis resulted in high quality monophasic wurtzite hexagonal structure of rod shaped nanoparticles of bare ZnO:Mn with no signature of dopant as separate phase. MSA capping resulted in nanoball like formation. Thermo gravimetric analysis (TGA) and FTIR confirmed MSA capping. ZnO: Mn particles emit in orange and red when excited by UV and blue light. Surface modification makes the nanoparticles hydrophilic with active organic surface easy for bioconjugation with any ligand and can have applications in drug delivery or as nanoscale fluorescent probe in a biological system.     

Sm_2Co_（17） magnet blocks for the in-vacuum undulators （IVU20） at the SSRF

The design and development status of Sm₂Co₁₇ magnet blocks for two in-vacuum undulators (IVU20) at the SSRF with the same hybrid design has been described. By the technological improvement of some processes and comparison with the experimental Sm₂Co₁₇ magnet blocks for the IVU25A, magnetic properties such as the intrinsic coercive force H_ci and the average magnetic moment M are increased, the bend point magnetic field H_k value and pass rate are significantly increased, and the magnetic field uniformity of the magnet blocks are significantly improved. The basic developmental method of high uniformity Sm₂Co₁₇ magnet blocks for IVU20 is presented. The magnetic field qualities of the magnet blocks, including the magnetic property, the magnetic moment distribution, the magnetization deviation angle and the magnetic field uniformity, basically satisfy the specifications of the two IVU20 in-vacuum undulators.     

Thickness dependent magnetization dynamics of perpendicular anisotropy Co/Pd multilayer films

We present the measurements of the picosecond magnetization dynamics of Co/Pd multilayer films. The dynamic magnetization properties of sputtered multilayer films were analyzed as a function of Co layer thicknesses and applied bias field. Both the eigenfrequencies of the magnetization precession in the multilayers and the associated Gilbert damping exhibit extreme sensitivity to the magnetic layer thickness on an atomic monolayer scale. The eigenfrequency increases more than threefold when the Co thickness decreases from 7.5 to 2.8 Å, mainly due to the changes in effective saturation magnetization and perpendicular anisotropy constant. A concomitant 2.6-fold increase in the damping of the oscillations is observed and attributed to stronger interface dissipation in thinner Co layers. In addition, we introduce a quasi-1D micromagnetic model in which the multilayer stack is described as a one-dimensional chain of macrospins that represent each Co layer. This model yields excellent agreement with the observed resonance frequencies without any free parameters, while being much simpler and faster than full 3D micromagnetic modeling.     

静态存储器型现场可编程门阵列总剂量辐射损伤效应研究

本文从FPGA器件内部最基本的CMOS单元出发,分析了器件功能失效时反相器输出波形随累积剂量的变化关系,进而研究Altera SRAM型FPGA器件⁶⁰Co γ射线辐照后的总剂量辐射损伤效应.实验结果表明:由于场氧漏电和结构漏电的影响,随着累积剂量的增加输出波形发生畸变,峰峰值变为原来的十分之一左右,但输出波形还有相对的高低电平;同时,输出高电平不能保持原有的状态,迅速地向低电平转换,并且转换速度随着累积剂量的增加而加快,输出低电平相对初始值有一定程度抬高;由于栅氧厚度变薄,输出波形 关键词： 60Coγ')" href="#">⁶⁰Coγ 总剂量辐射损伤效应 SRAM型FPGA CMOS单元     

Structural,optical and electrical properties of Ga-doped and (Ga,Co)-codoped ZnO films

The Ga-doped and (Ga, Co)-codoped ZnO films were grown on quartz glass substrate by inductively coupled plasma enhanced physical vapor deposition. The effect of Co doping and oxygen pressure on the structural, optical, electrical and magnetic properties of the as-grown films was investigated. The structural characterization revealed that high-quality films were grown with wurtzite structure and c-axis preferred crystalline orientation. The surface morphology was affected by Co doping and oxygen pressure. Room-temperature ferromagnetism was observed in (Ga, Co)-codoped ZnO films. We found that the optical and electrical properties were degraded with Co doping. The Ga-doped ZnO films had an average transmittance of above 88% in the visible wavelength, while (Ga, Co)-codoped ZnO showed a lower average transmittance (∼65%) due to the d-d transitions of Co²⁺. The resistivity and Hall mobility of (Ga, Co)-doped ZnO samples were lower than those of Ga-doped ZnO films when grown at the same oxygen pressure.