A photo-oxidation procedure using UV radiation/H2O2 for decomposition of wine samples — Determination of iron and manganese content by flame atomic absorption spectrometry

This paper proposes the use of photo-oxidation with UV radiation/H₂O₂ as sample pretreatment for the determination of iron and manganese in wines by flame atomic absorption spectrometry (FAAS). The optimization involved the study of the following variables: pH and concentration of buffer solution, concentrated hydrogen peroxide volume and irradiation time. The evaluation of sample degradation was monitored by measuring the absorbance at the maximum wavelength of red wine (530 nm). Using the experimental conditions established during the optimization (irradiation time of 30 min, oxidant volume of 2.5 mL, pH 10, and a buffer concentration of 0.15 mol L^− 1), this procedure allows the determination of iron and manganese with limits of detection of 30 and 22 μg L^− 1, respectively, for a 5 mL volume of digested sample. The precision levels, expressed as relative standard deviation (RSD), were 2.8% and 0.65% for iron and 2.7% and 0.54% for manganese for concentrations of 0.5 and 2.0 mg L^− 1, respectively. Addition/recovery tests for evaluation of the accuracy were in the ranges of 90%–111% and 95%–107% for iron and manganese, respectively. This digestion procedure has been applied for the determination of iron and manganese in six wine samples. The concentrations varied from 1.58 to 2.77 mg L^− 1 for iron and from 1.30 to 1.91 mg L^− 1 for manganese. The results were compared with those obtained by an acid digestion procedure and determination of the elements by FAAS. There was no significant difference between the results obtained by the two methods based on a paired t-test (at 95% confidence level).     

Synthesis and Characterization of [(1,4‐diamine)dichloro]platinum(II) Compounds Preliminary Studies on their Biological Activity

Two 1,4‐diamine ligands were synthesized having 1,2‐bis(aminomethyl)‐cyclohexane and 1,2‐bis(aminomethyl)‐benzene structures. The two ligands have different electron density in the six‐membered ring: a cyclohexane versus a phenyl ring. The organic synthesis of the ligands was carried out by synthetic pathways of seven and four steps, respectively, starting from 1,2,3,6‐tetrahydrophthalic anhydride and diethyl phthalate. The coordination of platinum to these ligands afforded platinum(II) complexes which are analogue to the clinical drug cisplatin but form a seven‐membered chelate ring. The interaction of the platinum compounds with DNA was studied in order to know the relationship between the electron density of ligands and their capability to chelate DNA, by using three techniques: Circular Dichroism, Agarose Gel Electrophoresis and Atomic Force Microscopy. The degree of interaction of both compounds with DNA was slightly different, but both complexes showed a cisplatin‐like behaviour and are promising candidates to follow an extensive study of their cytotoxic activity.     

A highly efficient capillary electrophoresis-based method for size determination of water-soluble CdSe/ZnS core-shell quantum dots

This paper describes a highly efficient method for size determination of water-soluble CdSe/ZnS core-shell quantum dots (QDs) by capillary electrophoresis (CE) using polymer additive as sieving medium. The influence of some factors, such as kinds and concentrations of the sieving medium, pH, concentrations of the background electrolyte (BGE) and applied voltage, on the separation of QDs was investigated. Under the optimal separation conditions, four different sized QDs were successfully separated, and the relative standard deviation (RSD) of the migration times for these QDs was below 1.013%. In addition, an equation was fit by taking into account the correlation existing between the electrophoretic mobilities and the sizes of a set of QDs. The feasibility of this equation to measure the sizes of other QDs was confirmed by comparison with the sizes obtained by transmission electron microscopy (TEM) experiment. This work offers a novel method for size determination of QDs, and provides an important reference on the study of QDs based on CE.     

Two rapid and sensitive automated methods for the determination of nitrite and nitrate in soil samples

Spectrophotometric flow injection methods were developed for the individual determination of nitrite or nitrate, and for the simultaneous determination of nitrite and nitrate, in soil samples. Nitrite was determined directly using a modified version of the Griess-Ilosvay diazo-coupling reaction, measuring at 543 nm the absorbance of the azo-dye complex formed. Simultaneous nitrite and nitrate determinations were based on on-line nitrate reduction in a micro column containing copperised cadmium. A single chromogenic reagent containing all the necessary reactants was used in both methods. For determinations, the chemical and instrumental variables were optimised by univariate analysis and simplex chemometric method. The optimised conditions gave a linear calibration range between 0.05 and 1.6 µg m L^− 1 for N-NO₂⁻ and between 0.05 and 7.0 µg m L^− 1 for N-NO₃⁻. The detection limits for nitrite and nitrate were 22 µg L^− 1 and 44 µg L^− 1 respectively. The proposed methods allowed up to 35-40 samples per hour to be analysed with good precision. The simultaneous method was successfully used for the determination of nitrite and nitrate in soil samples (the results obtained were validated against those obtained by reference methods). The proposed methods are simpler and faster than conventional methods and could be routinely used in environmental monitoring laboratories.     

Structural Changes Induced by Quinones: High-Resolution Microwave Study of 1,4-Naphthoquinone

1,4-Naphthoquinone (1,4-NQ) is an important product of naphthalene oxidation, and it appears as a motif in many biologically active compounds. We have investigated the structure of 1,4-NQ using chirped-pulse Fourier transform microwave spectroscopy and quantum chemistry calculations. The rotational spectra of the parent species, and its ¹³C and ¹⁸O isotopologues were observed in natural abundance, and their spectroscopic parameters were obtained. This allowed the determination of the substitution r_s, mass-weighted r_m and semi-experimental r_e^SE structures of 1,4-NQ. The obtained structural parameters show that the quinone moiety mainly changes the structure of the benzene ring where it is inserted, modifying the C−C bonds to having predominantly single or double bond character. Furthermore, the molecular electrostatic surface potential reveals that the quinone ring becomes electron deficient while the benzene ring remains a nucleophile. The most electrophilic areas are the hydrogens attached to the double bond in the quinone ring. Knowledge of the nucleophilic and electrophilic areas in 1,4-NQ will help understanding its behaviour interacting with other molecules and guide modifications to tune its properties.     

K6In2Q6 (Q = S,Se, Te): Missing Links in the Series of Alkali Chalcogenido Ditrielates(III)

The chalcogenido indates K₆In₂Q₆ (Q = S, Se, Te) were synthesized from melts of the pure elements at a maximum temperature of 700 °C. All three potassium salts contain dinuclear units [In₂Q₆]^6– of two edge-sharing [InQ₄] tetrahedra. The sulfido and the selenido indate are isotypic and crystallize in the K₆Mn₂O₆-type structure [monoclinic, space group P2₁/c, a = 784.32(9)/809.32(3), b = 1274.58(14)/1322.37(4), c = 836.48(9)/870.53(3) pm, β = 97.900(2)/97.5877(8)°, Z = 2, R₁ = 0.0123/0.0109; for Q = S/Se]. The tellurido indate K₆In₂Te₆ crystallizes in a new orthorhombic structure type [space group Pnma, a = 1793.70(12), b = 1491.55(11), c = 837.40(6) pm, Z = 4, R₁ = 0.0157]. In this structure, the telluride anions form a hexagonal close packing, in which K⁺ cations occupy all octahedral voids; the In³⁺ ions take 1/6 (but always adjacent) tetrahedral voids. This structure-chemical relation to the h.c.p. packing, which is similarly found for most of the sodium dimetallates (e.g. Na₆Fe₂S₆), is substantiated by a full crystallographic group-subgroup tree. The crystal chemistry of the new indates is discussed and compared with that of alkali chalcogenido metallates(III) of Fe, Al and Ga containing [M₂Q₆]^6– dimers, which overall form as many as ten different structure types. DFT band structure calculations of the three title compounds exhibit bandgaps, which continuously decrease from the S to the Te compound and which are also in accordance with the pale yellow (S), bright yellow (Se) and red-brown (Te) color of the compounds. The chemical bonding in the salts and within the metallate anion is discussed on the basis of the partial DOS and a Bader analysis of the calculated electron density.     

Fast Electrochemical Characterization of Historical Glasses Using Carbon Screen‐Printed Electrodes and Ultrasonic Assisted Sampling

A new method for lead oxide (PbO) analysis in glasses, using a carbon screen printed electrode (SPE) is proposed. A suspension of the powdered glass sample in nitric acid is prepared using an ultrasonic probe, 100 µL of slurry are deposited on the SPE and the voltammetric measurement is carried out. Structural information of PbO in the glass matrix is obtained by CV. Lead quantification is performed by DPV. In the best conditions a LOD of 2.30 wt% of PbO was obtained. The method has been applied with good results in the analysis of historical glasses samples.     

双显色剂高灵敏协同显色反应的研究——钼-溴邻苯三酚红-乙基紫体系

本文研究了在聚乙烯醇存在下,钼(Ⅵ)与溴邻苯三酚红和碱性染料-乙基紫产生的协同显色反应。探讨了利用协同显色反应进行分光光度测定痕量钼的可能性。在乙酸介质中,钼(Ⅵ)与溴邻苯三酚红和乙基紫形成[EV]₃[MoO₂(BPR)]离子缔合型配合物,其吸收峰位于535nm,相应试剂(BPR+EV)的吸收峰则位于640nm。摩尔吸光系数e₅₃₆=1.70×10⁵L·mol^-1·cm^-1。双峰双波长法可使灵敏度倍增。Δε_535～640=3.20×10⁵L·mol^-1。钼含量为0～0.16^μg/mL时,吸光度遵守比尔定律。桑德尔灵敏度(S)为0.00057μg/cm²。反应具有较高的选择性,除锗、钛、钨、钒有较严重干扰以外,其它常见金属离子不干扰钼的显色。根据配合物的组成,推测了它的可能结构。     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.