The stoichiometric hydrogenation of 9-methylidenefluorene and related compounds with hydridocobalt tetracarbonyl

9-Methylideneflourene (IIa) reacts rapidly with HCo(CO)₄ at -67° C to give a quantitative yield of 9-methylfluorene (IIIa); k₂  (13.4 ± 0.5) × 10^-2 l mol^-1_S^-1. Although the internal olefin, 9-ethylidenefluorene (IIb) reacts more slowly than IIa, it is hydrogenated about 2.5 times as fast as the terminal olefin, 1,1-diphenylethylene (I). Measurement of the rate of the reaction of IIb with DCo(CO)₄ and comparison with HCo(CO)₄ shows a very large inverse isotope effect k_H/k_D of 0.43.     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

Sustainable and Robust Graphene Cellulose Paper Decorated with Lithiophilic Au Nanoparticles to Enable Dendrite-free and High-Power Lithium Metal Anode

Lithium metal anodes (LMAs) with high energy density have recently captured increasing attention for development of next-generation batteries. However, practical viability of LMAs is hindered by the uncontrolled Li dendrite growth and infinite dimension change. Even though constructing 3D conductive skeleton has been regarded as a reliable strategy to prepare stable and low volume stress LMAs, engineering the renewable and lithiophilic conductive scaffold is still a challenge. Herein, a robust conductive scaffold derived from renewable cellulose paper, which is coated with reduced graphene oxide and decorated with lithiophilic Au nanoparticles, is engineered for LMAs. The graphene cellulose fibres with high surface area can reduce the local current density, while the well-dispersed Au nanoparticles can serve as lithiophilic nanoseeds to lower the nucleation overpotential of Li plating. The coupled relationship can guarantee uniform Li nucleation and unique spherical Li growth into 3D carbon matrix. Moreover, the natural cellulose paper possesses outstanding mechanical strength to tolerate the volume stress. In virtue of the modulated deposition behaviour and near-zero volume change, the hybrid LMAs can achieve reversible Li plating/stripping even at an ultrahigh current density of 10 mA cm⁻² as evidenced by high Coulombic efficiency (97.2 % after 60 cycles) and ultralong lifespan (1000 cycles) together with ultralow overpotential (25 mV). Therefore, this strategy sheds light on a scalable approach to multiscale design versatile Li host, promising highly stable Li metal batteries to be feasible and practical.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

Pine Needles (Pinus Sylvestris) as a Bioindicator of Sulphur and Heavy Metal Deposition in the Area Around a Pulp and Paper Mill Complex at Kemi,Northern Finland

Abstract

The determination of sulphur and heavy metals in plants is an integral part of many environmental studies. Pine needles (Pinus Sylvestris) have proved to be suitable air quality indicators for pollutants, especially for sulphur. This study was carried out in the vicinity of Kemi, a town situated on the Gulf of Bothnia in northern Finland. An industrial complex comprising two pulp and paper mills is located in the centre of the area. Scots pine (Pinus Sylvestris) needles were collected from 29 sampling sites. The samples were dried, homogenized and digested with nitric acid. The concentrations of the elements S, Fe, Zn, Ca, V, and Pb were determined by ICP-AES. According to our results pine needles (Pinus sylvestris) appear to be an ideal bioindicator and sampling material for identifying and assessing atmospheric sulphur pollution derived from pulp and paper mills and can complement the information provided by plant mapping studies around pulp and paper mills.     

Cloud point extraction combined with graphite furnace atomic absorption spectrometry for the determination of chromium species and their distribution in cigarette and cigarette ash

In this article, the contents and distribution of total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined by using a cloud point extraction (CPE) separation/preconcentration combined with graphite furnace atomic absorption spectrometric (GFAAS) detection. Different extraction reagents, such as tetramethylammonium hydroxide (TMAH), Na₂HPO₄, Na₂CO₃/NaOH, NaOH and H₂O, were tested for the extraction of Cr species, and the extraction efficiency was estimated. The experimental results showed that TMAH was the most efficient extraction reagent for the analyte in cigarette samples. By using the established method, the total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined and their distribution was studied. It was found that Cr(III) is a main species in cigarettes, but that it can be partly oxidized to Cr(VI) during smoking.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Cyanide ion colorimetric chemosensor based on protonated merocyanine in EtOH

This Letter aimed to develop an efficient method for the determination of cyanide ion (CN⁻). A novel colorimetric chemosensor 4-[(1E)-2-(4-hydroxyphenyl)ethenyl]-1-allylpyridinium bromide (HPEAPB) was synthesized. HPEAPB displayed good selectivity toward CN⁻ over other competing anions in ethanol. A color change from yellow to red was immediately observed upon the addition of CN⁻ and the limit of detection (LOD) was 3.4 × 10⁻⁶ mol L⁻¹. The sensing mechanism was discussed by UV–vis, ¹H NMR titration, and a comparison study. Colorimetric test paper for CN⁻ was prepared by attaching HPEAPB to a chromatography paper, which could be used to detect CN⁻ in environmental samples as simply as a pH-indicator paper for pH value. The LOD of the test paper for CN⁻ was 2.0 × 10⁻⁴ mol L⁻¹. This detection method for CN⁻ has potential applications in cyanide ion containing fields by combination of rapid and real-time advantages.     

A Rapid,Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.