Optical Gas Sensor Fabrication Based on Porphyrin-Anchored Electrostatic Self-Assembly onto Tapered Optical Fibers

Tapered optical fibers with nano-assembled coatings of thicknesses of order tens of nanometres were used for the detection of ammonia gas. The film coating was composed of alternate layers of tetrakis-(4-sulfophenyl) porphine (TSPP) and poly(allylamine hydrochloride) (PAH), which were deposited using the electrostatic self-assembly process (ESA). Exposure of a PAH/TSPP nano-assembled non-adiabatic tapered optical fiber with a waist diameter of 10 µm to ammonia induced significant optical changes in the transmission spectrum of the optical fiber. The fiber optic sensor showed a linear sensitivity to the concentration of ammonia in the range of 10–100 ppm, with response and recovery times less than 100 and 240 sec, respectively. The 3σ limit of detection (LOD) was estimated to be ca. 2 ppm.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Bipolar Electrochemistry

A bipolar electrode (BPE) is an electrically conductive material that promotes electrochemical reactions at its extremities (poles) even in the absence of a direct ohmic contact. More specifically, when sufficient voltage is applied to an electrolyte solution in which a BPE is immersed, the potential difference between the BPE and the solution drives oxidation and reduction reactions. Because no direct electrical connection is required to activate redox reactions, large arrays of electrodes can be controlled with just a single DC power supply or even a battery. The wireless aspect of BPEs also makes it possible to electrosynthesize and screen novel materials for a wide variety of applications. Finally, bipolar electrochemistry enables mobile electrodes, dubbed microswimmers, that are able to move freely in solution.     

Potentiometric determination of mefenamic acid in pharmaceutical formulation by membrane sensor based on ion-pair with basic dye

The characteristics,performance and application of membrane sensors based on ion-pair Brilliant Green mefenamate are described.The sensor’s response to the mefenamate ion has the sensitivity of （86.0±2.0） mV/pC over the range of 9×10^-5-1×10^-2moI/Land the detection limit of 4.5×10^-5mol/L at pH 8.5-12.The sensor is easily assembled at a relatively low cost and has fast response time（5-10 s）.The proposed sensor displayed good selectivity for mefenamate ion in the presence of different substances.It was used to determine mefenamic acid in pharmaceuticals.     

Facile Fabrication of Multi‐targeted and Stable Biochemical SERS Sensors

The direct transfer of single‐crystalline Au nanowires (NWs) onto Au substrates was achieved by a simple attachment and detachment process. In the presence of a lubricant, Au NWs grown vertically on a sapphire substrate were efficiently moved to an Au substrate through van der Waals interactions. We demonstrate that the transferred Au NWs on the Au substrate can act as sensitive, reproducible, and long‐term‐stable surface‐enhanced Raman scattering (SERS) sensors by detecting human α‐thrombin as well as Pb²⁺ and Hg²⁺ ions. These three biochemically and/or environmentally important analytes were successfully detected with high sensitivity and selectivity by Au NW‐SERS sensors bound by a thrombin‐binding aptamer. Furthermore, the as‐prepared sensors remained in working order after being stored under ambient conditions at room temperature for 80 days. Because Au NWs can be routinely transferred onto Au substrates and because the resultant Au NW‐SERS sensors are highly stable and provide with high sensitivity and reproducibility of detection, these sensors hold potential for practical use in biochemical sensing.     

Dual pH‐ and Temperature‐Responsive Metallosupramolecular Block Copolymers with Tunable Critical Micelle Temperature by Modulation of the Self‐Assembly of NIR‐Emissive Alkynylplatinum(II) Complexes Induced by Changes in Hydrophilicity and Electrostatic Effects

Terpyridylplatinum(II)‐based metallosupramolecular triblock copolymers with hydrophilic alkynyl ligands have been synthesised and characterised. As a result of the intrinsic properties of Pluronics, reversible temperature‐induced micellisation occurred at high temperature leading to aggregation of the platinum(II) complex moieties through Pt???Pt and π–π interactions, resulting in significant UV/Vis absorption and near‐infrared (NIR) emission spectral changes. The critical micelle temperatures of the complexes were found to vary from 21 to 30 °C due to differences in the hydrophilicity of the alkynyl ligands and the electrostatic repulsions between the positively charged platinum(II) complex moieties. One of the complexes with pH‐responsive CH₂NMe₂ groups on the alkynyl ligand was found to show NIR emission that is sensitive to both pH and temperature. Such dual‐responsive behaviour has been ascribed to the modulation of the self‐assembly of the complex moieties by temperature‐induced micellisation and the changes in the hydrophilicity as well as electrostatic interactions upon protonation/deprotonation of the CH₂NMe₂ groups on the alkynyl ligand.