铂（Ⅳ）—钼酸盐—丁基罗丹明B缔合显色反应的研究

本文研究在聚乙烯醇(PVA)存在下,铂与钼酸铵和丁基罗丹明B(BRB)形成离子缔合物,该缔合物的最大吸收位于570nm,摩尔吸光系数ε值为9.26×10~5L·mol~(-1)·cm~(-1),服从比耳定律范围0～3.0μg Pt/25ml,缔合物至少稳定3周。测定铂的条件为C_(HClO_4)=1.4mol/L,C_(MoO_4~(2-)=1.1×10~(-3)mol/L,C_(BRB)=3.8×10~(-5)mol/L,0.08％PVA。考察了40多种共存离子的影响,除形成杂多酸的元素外,大多数不干扰。本法已用于催化剂和某些铂矿中铂的测定,结果较满意。     

Beiträge zum thermischen Verhalten wasserfreier Phosphate. IX. Darstellung und Kristallstruktur von Cr6(P2O7)4. Ein gemischtvalentes Pyrophosphat mit zwei- und dreiwertigem Chrom

Contributions on the Thermal Behaviour of Anhydrous Phosphates. IX. Synthesis and Crystal Structure of Cr₆(P₂O₇)₄. A Pyrophosphate Containing Di- and Trivalent Chromium Cr₆(P₂O₇)₄ (Cr₂²⁺Cr₄³⁺(P₂O₇)₄) can be obtained reducing CrPO₄ by phosphorus (950°C, 48 h, 100 mg iodine as mineralizer). By means of chemical transport reactions (transport agent iodine; 1050 → 950°C) the compound has been separated from its neighbour phases (Cr₂P₂O₇, CrP₃O₉) and crystallized (greenish, transparent crystals; edge length up to 0.3 mm). The crystal structure of Cr₆(P₂O₇)₄ (Spcgrp.: P-1; z = 1; a = 4.7128(8) Å, b = 12.667(3) Å, c = 7.843(2) Å, α = 89.65(2)°, β = 92.02(2)°, γ = 90.37(2) has been solved and refined from single crystal data (2713 unique reflections, 194 parameter, R = 0.035). Cr²⁺ is surrounded by six oxygen atoms which occupy the corners of an elongated octahedron (4 × d^{Cr? O} ≈? 2.04 Å; 2 × d^{Cr? O} ≈? 2.62 Å). The Cr³⁺ ions are also coordinated octahedraly (1.930 Å ≤ d_{Cr? O} ≤ 2.061 Å). The crystallographically independent pyrophosphate groups show nearly eclipsed conformation. The bridging angles (P? O? P) are 136.5° and 138.9° respectively.     

Enantioselective allylation of alkyl glyoxylates catalyzed by (salen)chromium(III) complexes

The enantioselective addition of allylstannanes and allylsilanes to alkyl glyoxylates of type 1, catalyzed by chiral (salen)Cr(III) complexes 3, has been studied. We have found that the reaction proceeded smoothly for low loading (1-2 mol %) of (1R,2R)-(salen)Cr(III)BF₄3a or (1R,2R)-(salen)Cr(III)ClO₄3c, and allyltributyltin under simple, undemanding conditions, affording (R)-2-hydroxypent-4-enoic acid esters 2 in good yield (61-90%) and enantioselectivity (58-76% ee).     

Elimination of SAS Interferences in Catalytic Adsorptive Stripping Voltammetric Determination of Cr(VI) by Means of Fumed Silica

In the work the procedure of chromium(VI) determination by catalytic adsorptive stripping voltammetry (CAdSV) with application of fumed silica, is presented. Two variants of the method are proposed: in the first fumed silica is put directly to the electrolytic cell containing tested solution, in the second the silica is shaken with the sample and next centrifuged. The effectiveness of many surface‐active substances removal from synthetic solutions as well as natural water samples, is studied. In the experiments the fumed silica (Sigma‐Aldrich) of the specific surface area in the range 200–390 m² g^?1 was used. Two types of the working electrodes were applied, i.e., hanging mercury drop electrode (HMDE) and cyclic renewable mercury film electrode (Hg(Ag)FE). In the silica presence i) the relative standard deviation (RSD) for 0.1 μg L^?1 Cr(VI) is <2% (HMDE) and <5% (Hg(Ag)FE), n=7, ii) the detection limits estimated deposition time 20 s were respectively 14 ng L^?1 (HMDE) and 22 ng L^?1 (Hg(Ag)FE). The accuracy of the method was tested by studying the recovery of Cr(VI) from spiked natural water samples.     

Rhodium(I) catalyzed four-component reaction of Fischer alkenyl carbene complexes and 1,1-diphenylallene

Alkyl substituted chromium Fischer carbene complexes react with 1,1-diphenylallene in the presence of rhodium(I) catalysts (10 mol%) to yield highly substituted dienyl indenone derivatives. In this process a catalytic chromium(0)-rhodium(I) exchange occurs, four new C-C bonds are created, and four-components (two allenes, the carbene ligand and one CO ligand) are joined in a chemo- and regioselective manner.     

Spectrophotometric method for the determination of demeclocycline using sodium molybdate as analytical reagent

By means of spectroscopic methods it has been found that demeclocycline reacts with molybdate ions forming a complex compound [MoO₃HDMTC]^2–. The relative stability constant of this compound has been determined by applying spectrophotometric methods. Under optimum conditions for complex formation a very sensitive spectrophotometric method for the estimation of demeclocycline in the concentration range 5.0–35.1 g/ml is proposed. The detection limit of the method is 2.5 g/ml of demeclocycline. The relative standard deviation (n=10) varies between 0.76% and 1.46%. The method proved to be accurate and sensitive for the analysis of the demeclocycline content in tablets.     

Room temperature photoluminescence of amorphous BaxSr1−xTiO3 doped with chromium

ABO₃ amorphous materials, such as BaTiO₃ (BT), SrTiO₃ (ST), PbTiO₃ (PT), and Ba_xSr_1−xTiO₃ (BST) have recently attracted a good deal of attention due to their ferroelectric and electro-optical properties. Intense photoluminescence at room temperature was observed in amorphous titanate doped with chromium (Ba_xSr_1−xTi_1−yCr_yO₃) prepared by the polymeric precursor method. Results indicated that substantial luminescence at room temperature was achieved with the addition of small Cr contents to amorphous Ba_xSr_1−xTi_1−yCr_yO₃. Further addition of Cr or crystallization were deleterious to the intensity of the luminescent peak obtained for excitation using λ=488.0 nm.     

Ternary silicides M2Cr4Si5 (M=Ti, Zr, Hf): filled variants of the Ta4SiTe4 structure type

The isostructural ternary silicides M₂Cr₄Si₅ (M=Ti, Zr, Hf) were prepared by arc-melting of the elemental components. The single-crystal structure of Zr₂Cr₄Si₅ was determined by X-ray diffraction (Pearson symbol oI44, orthorhombic, space group Ibam, Z=4, a=7.6354(12) Å, b=16.125(3) Å, c=5.0008(8) Å). Zr₂Cr₄Si₅ adopts the Nb₂Cr₄Si₅-type structure, an ordered variant of the V₆Si₅-type structure. It consists of square antiprisms that have Zr and Cr atoms at the corners and Si atoms at the centers; they share opposite faces to form one-dimensional chains _∞¹[Zr_4/2Cr_4/2Si] surrounded by additional Si atoms and extending along the c direction. In a new interpretation of the structure, additional Cr atoms occupy interstitial octahedral sites between these chains, clarifying the relation between this structure and that of Ta₄SiTe₄. The formation of short Si-Si bonds in Zr₂Cr₄Si₅ is contrasted with the absence of Te-Te bonds in Ta₄SiTe₄. The compounds M₂Cr₄Si₅ (M=Ti, Zr, Hf) exhibit metallic behavior and essentially temperature-independent paramagnetism. Bonding interactions were analyzed by band structure calculations, which confirm the importance of Si-Si bonding in these metal-rich compounds.     

Use of cetyltrimethylammonium bromide as surfactant for the determination of copper and chromium in gasoline emulsions by electrothermal atomic absorption spectrometry

In this work, the use of cetyltrimethylammonium bromide as surfactant for the preparation of oil-in-water emulsions for the determination of Cu and Cr in gasoline by electrothermal atomic absorption spectrometry (ET AAS) was evaluated. The surfactant amount was tested in the range of 25 to 300 mg, added to 2 ml of gasoline, and completed to 10 mL with 0.1% (v/v) nitric acid solution. 150 mg of surfactant was found optimum, and a sonication time of 10 min sufficient to form an oil-in-water emulsion that was stable for several hours. The ET AAS temperature program was established based on pyrolysis and atomization curves. The pyrolysis temperatures were set at 700 and 1300 °C for Cu and Cr, respectively and the selected atomization temperatures were 2400 and 2500 °C. The time and temperature of the drying stage and the atomization time were experimentally tested to provide optimum conditions. The limits of detection were found to be 5 μg L^− 1 and 1.5 μg L^− 1 for Cu and Cr, respectively in the original gasoline samples. The relative standard deviation (RSD) ranged from 4 to 9% in oil-in-water emulsions spiked with 5 μg L^− 1 and 15 μg L^− 1 of each metal, respectively. Recoveries varied from 90 to 98%. The accuracy of the proposed method was tested by an alternate procedure using complete evaporation of the gasoline sample. The method was adequate for the determination of Cu and Cr in gasoline samples collected from different gas stations in Salvador, BA, Brazil.     

Optical spectroscopy of chromium doped (CH3)2NH2X(SO4)2·6H2O (X=Al, Ga) single crystals

Chromium doped (CH₃)₂NH₂Al(SO₄)₂·6H₂O (DMAAlS) and (CH₃)₂NH₂Ga(SO₄)₂·6H₂O (DMAGaS) single crystals were grown and investigated using the methods of optical spectroscopy. It was found that the Cr³⁺ ions in the two crystals are situated in a strong crystal field in which the ²E state is the lowest. The single narrow R-line associated with the ²E–⁴A₂ phosphorescence of Cr³⁺ in DMAAlS in a ferroelectric phase indicates an undistorted octahedral site, whereas important distortion of O_h symmetry and structural disorder was inferred from spectral data obtained with DMAGaS:Cr³⁺ in a low temperature phase. Results of optical investigation are discussed taking into account the structural data.