Adsorption of metal anions of vanadium(V) and chromium(VI) on Zr(IV)-impregnated collagen fiber

The metal anions of vanadium (V) and chromium (VI) in aqueous solution can be effectively adsorbed by Zr(IV)-impregnated collagen fiber (ZrICF). The maximum adsorption capacity of V(V) takes place within the pH range of 5.0 to 8.0, while that of Cr(VI) is within the pH range of 6.0 to 9.0. When the initial concentration of metal ions was 2.00 mmol L⁻¹ and the temperature was 303 K, the adsorption capacity of V(V) on Zr-ICF was 1.92 mmol g⁻¹ at pH 5.0, and the adsorption capacity of Cr(VI) was 0.53 mmol g⁻¹ at pH 7.0. As temperature increased, the adsorption capacity of V(V) increased, while that of Cr(VI) was almost unchanged. The adsorption isotherms of the anionic species of V(V) and Cr(VI) can be fit by the Langmuir equation. The adsorption rate of V(V) follows the pseudo-first-order rate model, while the adsorption rate of Cr(VI) follows the pseudo-second-order rate model. Furthermore, ZrICF shows high adsorption selectivity to V(V) in the mixture solution of V(V) and Cr(VI). Practical applications of ZrICF could be expected in consideration of its performance in adsorption of V(V) and Cr(VI).     

Synthesis of enantiopure β-amino alcohols via AKR/ARO of epoxides using recyclable macrocyclic Cr(III) salen complexes

A series of chiral macrocyclic Cr(III) salen complexes 1-8 were synthesized and characterized. These complexes were found to be highly active, regio-, diastereo-, and enantioselective catalysts in aminolytic kinetic resolution (AKR) of racemic trans-epoxides as well as asymmetric ring opening (ARO) of prochiral meso-epoxides with various anilines as nucleophiles at room temperature in 18-24 h. Excellent yields (>99% with respect to the nucleophile) with high enantioselectivity (ee, >99%) of chiral anti-β-amino alcohols was achieved with concomitant recovery of corresponding epoxides in high ee (up to >99%). The complex 1 also catalyzed the ARO of meso-epoxides to provide corresponding syn-β-amino alcohols in high yield (99%) and ee (up to 91%). Due to built-in basic sites in the catalyst, no external base (as an additive) was required to promote AKR and ARO reactions. The catalyst 1 was conveniently recycled several times with retention of its performance. The AKR of trans-stilbene oxide with aniline was successfully demonstrated at relatively higher scale (10 mmol) using the catalyst 1.     

A microfluidic paper-based analytical device for rapid quantification of particulate chromium

Occupational exposure to Cr is concerning because of its myriad of health effects. Assessing chromium exposure is also cost and resource intensive because the analysis typically uses sophisticated instrumental techniques like inductively coupled plasma-mass spectrometry (ICP-MS). Here, we report a novel, simple, inexpensive microfluidic paper-based analytical device (μPAD) for measuring total Cr in airborne particulate matter. In the μPAD, tetravalent cerium (Ce(IV)) was used in a pretreatment zone to oxidize all soluble Cr to Cr(VI). After elution to the detection zone, Cr(VI) reacts with 1,5-diphenylcarbazide (1,5-DPC) forming 1,5-diphenylcarbazone (DPCO) and Cr(III). The resulting Cr(III) forms a distinct purple colored complex with the DPCO. As proof-of-principle, particulate matter (PM) collected on a sample filter was analyzed with the μPAD to quantify the mass of total Cr. A log-linear working range (0.23–3.75 μg; r² = 0.998) between Cr and color intensity was obtained with a detection limit of 0.12 μg. For validation, a certified reference containing multiple competing metals was analyzed. Quantitative agreement was obtained between known Cr levels in the sample and the Cr measured using the μPAD.     

过氧化氢氧化酸性品红催化光度法测定痕量铬(Ⅵ)

基于在弱酸介质中,铬(Ⅵ)催化过氧化氢氧化酸性品红的反应,建立了动力学分光光度法测定痕量铬(Ⅵ)的新方法。本法的检出限为5.7×10~(-9)g/ml,线性范围为0～160ng/ml。可用于电镀废水和电镀排放水中铬(Ⅵ)的测定。     

Diamond paste-based electrodes for determination of Cr(III) in pharmaceutical compounds

A new class of monocrystalline diamond paste-based electrodes is proposed for the determination of chromium(III) at trace levels in vitamins. Three types of monocrystalline diamond—natural diamond 1 (natural diamond), synthetic diamond 50 (synthetic-1), and synthetic diamond 1 (synthetic-2)—were used for electrode construction. The linear concentration ranges are between 10^–10 and 10^–8; 10^–9 and 10^–7, and 10^–10 to 10^–8 mol L^–1, with limits of detection of 10^–12, 10^–12, and 10^–11 mol L^–1, when natural diamond, synthetic-1, and synthetic-2, respectively, are used as electrode materials. For electrodes based on natural diamond and synthetic-1 it was found that Cr(III) yields a peak at about +0.275±0.015 V (vs. Ag/AgCl) within a predetermined positive potential range situated between +0.4 and +0.2 V, while for the electrode based on synthetic-2 the peaks are found at +0.300±0.015 V (vs. Ag/AgCl). The proposed method is reliable for the determination of chromium(III) at trace levels in two vitamin tablets (RSD<0.2%).     

The Reactivity of Cr‐Te Superlattice Reactants and of Co‐deposited Cr‐Te Films: Studies with in‐situ X‐ray Diffractometry

The reactivity of a Cr‐Te multilayer film consisting of 326 Cr/Te double‐layers with about 88(3) at% Te was investigated with in‐situ X‐ray diffraction. The occurrence of a superstructure reflection caused by the multilayer system is observed. During the annealing procedure between 80 and 90 °C the layer‐by‐layer arrangement is destroyed and elemental Te crystallizes. After 6 h isothermal annealing at 140 °C CrTe₃ starts to crystallize. The amount and the crystal size of CrTe₃ increase with raising temperature and Te is consumed during the growth process. At 220 °C the formation of crystalline Cr₂Te₃ is observed and between 220 and 260 °C CrTe₃ is completely decomposed into Cr₂Te₃. The two Cr tellurides grow as highly textured materials. The size of CrTe₃ crystals is significantly larger than that of Cr₂Te₃. For a co‐deposited Cr‐Te film with composition 77(3) at% Te the tri‐telluride and elemental Te crystallize simultaneously. The texture of CrTe₃ is less pronounced and different reflections of the tri‐telluride occur besides the (h00)‐reflections. Up to 160 °C a pronounced increase of the crystallite size is observed and the crystals are significantly larger than those obtained with the multifilm sample. At 130 °C the crystallization kinetics seem to be controlled by nucleation.     

Neue neutrale und kationische Mono‐Aziridin‐Komplexe des Typs [CpMn(CO)2Az], [CpCr(NO)2Az]+ und [(Ph3P)(CO)4ReAz]+ über CO‐, Hydrid‐ und Chlorid‐Abspaltungsreaktionen

Novel Neutral and Cationic Mono‐Aziridine Complexes of the Type [CpMn(CO)₂Az], [CpCr(NO)₂Az]⁺, and [(Ph₃P)(CO)₄ReAz]⁺ via CO‐, Hydride‐, and Chloride‐Elimination Reactions The monoaziridine complexes 1 — 5 are obtained by three differently induced substitution reactions. The photolytically induced CO substitution reaction of [CpMn(CO)₃] with 2, 2‐dimethylaziridine leads to the neutral N‐coordinate aziridine complex [Cp(CO)₂Mn{$\overline{N(H)CMe₂C}$ H₂}] ( 1 ). The protonation of [(Ph₃P)(CO)₄ReH] with CF₃SO₃H and consecutive treatment with 2, 2‐dimethylaziridine or 2‐ethylaziridine gives the salt‐like aziridine complexes [(Ph₃P)(CO)₄Re{$\overline{N(H)CMe₂C}$ H₂}](CF₃SO₃) ( 2 ) or [(Ph₃P)(CO)₄Re{ H₂}](CF₃SO₃) ( 3 ) by hydride elimination reactions. The like‐wise salt‐like complexes [Cp(NO)₂Cr{$\overline{N(H)CMe₂C}$ H₂}](BF₄) ( 4 ) and [Cp(NO)₂Cr{ H₂}](CF₃SO₃) ( 5 ) are synthesized from [CpCr(NO)₂Cl] by chloride elimination with AgX (X = BF₄, CF₃SO₃) in the presence of 2, 2‐dimethylaziridine or 2‐ethylaziridine, respectively. As a result of X‐ray structure analyses, the metal atoms are trigonal pyramidally ( 1, 4, 5 ) or octahedrally ( 2, 3 , cis‐position) configurated; the intact three‐membered rings coordinate through the distorted tetrahedrally configurated N atoms. All compounds 1‐5 are stable with respect to the directed thermal alkene elimination to give the corresponding nitrene complexes; the IR, ¹H‐ and ¹³C{¹H}‐NMR, and MS spectra are reported and discussed.     

Cloud point extraction combined with graphite furnace atomic absorption spectrometry for the determination of chromium species and their distribution in cigarette and cigarette ash

In this article, the contents and distribution of total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined by using a cloud point extraction (CPE) separation/preconcentration combined with graphite furnace atomic absorption spectrometric (GFAAS) detection. Different extraction reagents, such as tetramethylammonium hydroxide (TMAH), Na₂HPO₄, Na₂CO₃/NaOH, NaOH and H₂O, were tested for the extraction of Cr species, and the extraction efficiency was estimated. The experimental results showed that TMAH was the most efficient extraction reagent for the analyte in cigarette samples. By using the established method, the total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined and their distribution was studied. It was found that Cr(III) is a main species in cigarettes, but that it can be partly oxidized to Cr(VI) during smoking.     

One Dimensional Face-to-Face Stacking of Anderson–Evans [Cr(OH)6Mo6O18]3− Polyoxometalate Anion: Synthesis, Structure, and Physical Properties of (BEDT-TTF)4[Cr(OH)6Mo6O18]⋅2H2O

The synthesis, structural and magnetic characterizations of a new charge transfer salt (BEDT-TTF)₄[Cr(OH)₆Mo₆O₁₈]2H₂O based on the planar paramagnetic Anderson–Evans polyoxometalate are reported. Structural parameters: T=293 K, triclinic (P ), a=5.9545(2) Å, b=16.3767(6) Å, c=21.8643(6) Å, =110.829(2)°, =91.262(2)°, =98.129(1)°, Z=1, R=0.0540. The crystal structure is characterized by a face-to-face stacking of the anions giving rise to a one-dimensional inorganic chain which develops along the a direction. The organic layers contain two crystallographically independent BEDT-TTF dimers that form alternating stacks along the b direction. This organic chain is perpendicular to the inorganic chains. The charges on BEDT-TTF dimers are deduced to +1.2(1) and +1.7(1) on the basis of the intramolecular bond lengths. The EPR spectrum at 2.5 K is characterized by the superposition of BEDT-TTF⁺ and [Cr^III(OH)₆Mo₆O₁₈]^3– signals. The static susceptibility can be fitted by the Curie–Weiss law down to 1.9 K and the magnetic moment at 300 K is estimated to 4.21 _B , suggesting the uncorrelated spin system with BEDT-TTF⁺ (S=1/2) and Cr^III (S=3/2) ions. This interpretion is consistent with the charge disproportionation on BEDT-TTF dimers along the stack, which is supported by the refined molecular structure and is closely related to the insulating behavior (<10^–9Scm^–1 at RT).     

Insight into room-temperature catalytic oxidation of NO by CrO2(110): A DFT study

The first-principles DFT calculations together with microkinetic analysis reveal the complex catalytic mechanism of low-content NO oxidation on CrO₂(110) at room temperature. It quantitatively makes clear that CrO₂(110) can exhibit considerable activity with the Mars-van-Krevelen mechanism preferred, and the nitrate species serves as the key poisoning species.