Abtrennung von Verunreinigungen (Au, Ga, Fe, Tl) aus Tellur(IV)-L?sungen durch Extraktion

Ohne Zusammenfassung

---

Separation of impurities (Au, Ga, Fe, Tl) from tellurium(IV) solutions by extraction

     

Titrimetric determinations of cryptands and cryptates

Summary Using bromocresol green as a visual endpoint indicator solutions of the cryptands [2.2.1] and [2.2.2] can be determined by titration with HCl in the concentration range of 10^–1–10^–3 M with relative standard deviations of 0.2–0.4 %. If both cryptand and cryptate are present in one solution, then the sum of them can be determined titrimetrically in the same way. It is also possible to determine the contents of [2.2.1] and [2.2.2] by using a calcium or barium standard solution and the unknown cryptand solution as a titrant. By evaluation of the pH-curve thus obtained, the endpoint of the titration can be determined. In the concentration range of 10^–1–10^–2 M relative standard deviations of about 0.5% are obtained. [2.2.1] cryptand solutions are determined by using the standard addition technique of Gran with a calcium chloride solution. An ion-selective electrode is used as a probe for calcium ions. If this method is applied, the relative standard deviation in the range of 10^–2–10^–4 M solutions is approximately 3%. With this technique cryptand can be analysed even when cryptate is present in the solution.We wish to thank the Deutsche Forschungsgemeinschaft and the Fonds der Chemischen Industrie for their financial support.     

HX+2(X=Cl,Br)离子的密度函数理论(DFT)研究

选取密度泛函方法,采取6-311++G(2df,2pd)基组对单态HCl+2和HBr+2离子进行了理论计算.考虑到HF+2离子中D∞h结构可独立存在的事实,文中首次对HCl+2和HBr+2离子的包含D∞h在内的四种可能几何构型进行了优化计算;求得了Cl2与Br2的质子亲和能及Cl-ClH+与Br-BrH+的键分离能,丰富和完善了对HCl+2的理论计算,并对HBr+2离子存在的可能性进行了计算研究,结果预言HBr+2单态中Cs结构为其平衡结构.最后给出了HCl+2和HBr+2的热化学数据、力常数等数值,并给出了基态HBr+2离子的离解通道,从而给出其完全离解时的离解能,为该离子的分析势能函数的推导准备了必需的理论数据.     

Polydiacetylene‐Based Electrospun Fibers for Detection of HCl Gas

Polydiacetylenes (PDAs), a family of conjugated polymers, are very intriguing materials in several aspects. Especially, the stimulus‐induced apparent blue‐to‐red transition of the PDAs has led to the development of a variety of PDA‐based chemosensors. In the current work, we synthesized PDA monomers bearing trimethyl amine (PCDA‐DMEDA) and incorporated them with Poly(ethylene oxide) (PEO) into electrospun fibers. For the first time, we successfully demonstrated that PDA‐based electrospun fibers can be used for the naked‐eye detection of HCl gas by simple color change (blue to red).     

Extractive-spectrophotometric methods for determination of anti-Parkinsonian drug in pharmaceutical formulations and in biological samples using sulphonphthalein acid dyes

A simple, accurate and highly sensitive spectrophotometric methods are proposed for the rapid and accurate determination of amantadine HCl (AMD) using bromocressol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB). The developed methods involve formation of stable yellow colored chloroform extractable ion-associate complexes of the amino derivative (basic nitrogen) of the AMD with three sulphonphthalein acid dyes, namely; BCG, BPB and BTB, in acidic medium. The ion-associates exhibit absorption maxima at 415, 412 and 414 nm for BCG, BPB and BTB, respectively. AMD can be determined up to 1.5–16.5, 1.4–14.0 and 1.6–17 μg mL^?1, respectively. The effect of optimum conditions via acidity, reagent concentration, time, and solvent was studied. The stoichiometry of the reaction was found to be 1:1 in all cases. The low relative standard deviation values indicate good precision and high recovery values. These methods have been successfully applied for the assay of AMD in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

A theoretical study on decomposition of carbon tetrachloride, trichloroethylene and ethyl chloride in dry air under the influence of an electron beam

New experimental data were published in literature regarding CCl₄, C₂HCl₃ and C₂H₅Cl decomposition in dry air under electron beam influence. Taking into account experimental data theoretical models of those species decomposition were established and computer simulations were performed by the authors of this work to find the kinetics of such processes. The results of the calculations and experimental data show that CCl₄ decomposition depends on delivered dose and initial CCl₄ concentrations. The calculation revealed that recombination of CCl⁺₄ and Cl⁻ is the source of CCl₃ radicals and that reaction may have an important role in the process of CCl₄ decomposition. A theoretical model of C₂HCl₃ decomposition in dry air under electron beam influence describes the decay of C₂HCl₃ and the formation of several products such as Cl₂, CCl₂O, CO, CO₂, HCl and C₂HCl₃O. The detailed comparison of experimental and theoretical data shows relatively good agreement in efficiency of C₂HCl₃ decomposition process, but it can be achieved only with an assumption that the relation between rate constants of C₂HCl₄O intermediate product decomposition (C₂HCl₃O+Cl and COCl₂+CHCl₂) should be around 20 and C₂HCl₃O oxidation rate should be not lower than 7.5×10⁻¹¹ cm³/mols. All those rate constants are not yet established experimentally. The results of the calculation of C₂H₅Cl decomposition and the data obtained experimentally were compared. The temperature, gas pressure, initial C₂H₅Cl concentration and dose range were equal in both cases. An elaborated model allow us to obtain quantitatively similar results as the experiments, but the degree of C₂H₅Cl decomposition for certain dose levels is significantly higher in experimental data. It is quite probable that some important processes have not been included to the theoretical model.     

The Efficiency of Corrosion Inhibitor as Given by Electrochemical Impedance Spectroscopy Tafel Polarization and Weight-Loss Measurements

ABSTRACT

The compound 6-methylquinoxalin-2(1H)-one (Q-CH₃) was synthesized, and its inhibiting action on the corrosion of mild steel in 1M HCl was investigated by various corrosion-monitoring techniques: electrochemical and weight-loss measurements. Results showed that this compound has fairly good inhibiting properties for steel corrosion in acidic medium, with efficiencies of around 97% at a concentration of 10^?2 M. The protection efficiency of this inhibitor decreases slightly with the rise of temperature, and it is improved with the immersion time.     

A simple and efficient synthesis of 2-substituted benzothiazoles catalyzed by H_2O_2/HCl

A simple and efficient procedure for the synthesis of substituted benzothiazoles through condensation of 2-aminothiophenol with aromatic aldehydes in the presence of H_2O_2/HCl system in ethanol at room temperature is described.The target compounds have been characterized by ~1H NMR,~(13)C NMR,IR and MS.Short reaction time,easy and quick isolation of the products,and excellent yields are the main advantages of this procedure.     

盐酸土霉素与牛血清白蛋白的相互作用研究

采用同步荧光和紫外吸收光谱法,研究了在pH7.40的Tris-HCl缓冲体系下,盐酸土霉素(Oxytetracycline HCl)与牛血清白蛋白的相互作用,研究表明在正常生理条件下盐酸土霉素对牛血清白蛋白有较强的猝灭作用,根据不同的药物浓度、温度及紫外吸收光谱的变化,判断其猝灭方式可能为静态猝灭,同时考察了不同离子存在条件下盐酸土霉素对BSA荧光猝灭的影响。得出在不同温度下反应的结合常数KD分别为4.167×10-5mol·L-1(25℃)、3.6×10-3mol·L-1(37℃),盐酸土霉素与BSA按1∶1的比例结合;根据反应热力学参数确定了它们之间相互作用的主要形式为疏水作用力;采用同步荧光考察了盐酸土霉素对BSA构象的影响,发现随药物浓度的增大,色氨酸残基的最大发射波长不变,而酪氨酸残基所处环境的疏水性改变,从而导致BSA的构象发生了变化。     

金纳米团簇在盐酸和十二硫醇刻蚀作用下的原位生长动力学研究

了解金属纳米团簇的形成机制对于进一步发展其化学制备方法是必要的。我们利用盐酸(HCl)和十二硫醇(RSH)共同刻蚀L₃ (L₃: 1, 3-双二苯基膦丙烷)包覆的多分散性的Au_n (15 ≤ n ≤ 60)团簇成功制备出单分散性的Au₁₃(L₃)₂(SR)₄Cl₄纳米团簇,并结合原位同步辐射X射线吸收谱、原位真空紫外-可见吸收光谱和质谱技术,研究了Au₁₃(L₃)₂(SR)₄Cl₄纳米团簇的动力学形成过程。结果表明,Au团簇从多分散到单分散的转变经历了3个明显不同的动力学步骤。首先,尺寸较大的多分散金属团簇Au_n主要在HCl刻蚀作用下,形成尺寸较小的亚稳的中间产物Au₈–Au₁₁团簇。然后,这些中间产物与反应溶液中已有的Au(Ⅰ)-Cl物种反应,并与SR发生部分配体交换,逐渐长大为由SR和L₃保护的Au₁₃团簇。最后,形成的Au₁₃团簇经过一个较缓慢的结构重组过程,最终形成稳定的Au₁₃(L₃)₂(SR)₄Cl₄的纳米团簇。